TELTONIKA Networks RUT240 Industrial 4G LTE Wi-Fi Router User Manual
- June 12, 2024
- TELTONIKA Networks
Table of Contents
RUT240
HARDWARE
FRONT VIEW
BACK VIEW
POWER SOCKET PINOUT
FEATURES
MOBILE
Mobile module| 4G (LTE) – Cat 4 up to 150 Mbps, 3G – Up to 42 Mbps, 2G – Up to
236.8 kbps
---|---
Status| Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, Bytes
sent/received, connected band, IMSI, ICCID
SMS| SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to
SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS,
scheduled SMS, SMS autoreply, SMPP
Black/White list| Operator black/white list
Band management| Band lock, Used band status display
APN| Auto APN
Bridge| Direct connection (bridge) between mobile ISP and device on LAN
Passthrough| Router assigns its mobile WAN IP address to another device on LAN
Multiple PDN (optional)| Possibility to use different PDNs for multiple network
access and services (not available in standard FW)
WIRELESS
Wireless mode| IEEE 802.11b/g/n, Access Point (AP), Station (STA)
WiFi security| WPA2-Enterprise – PEAP, WPA2-PSK, WEP, WPA-EAP, WPA-PSK; AES-
CCMP, TKIP, Auto Cipher modes, client separation
SSID| SSID stealth mode and access control based on MAC address
WiFi users| Up to 50 simultaneous connections
Wireless Hotspot| Captive portal (Hotspot), internal/external Radius server,
built in customizable landing page
ETHERNET
WAN| 1 x WAN port (can be configured to LAN) 10/100 Mbps, compliance with IEEE
802.3, IEEE 802.3u standards, supports auto
MDI/MDIX
LAN| 1 x LAN port, 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u
standards, supports auto MDI/MDIX
NETWORK
Routing| Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, RIPng,
OSPF6)
Network protocols| TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP,
SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPnP, SSH, DHCP, Telnet
client, SNMP, MQTT, Wake On Lan (WOL)
VoIP passthrough support| H.323 and SIP-alg protocol NAT helpers, allowing
proper routing of VoIP packets
Connection monitoring| Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP
for link inspection
Firewall| Port forward, traffic rules, custom rules
DHCP| Static and dynamic IP allocation, DHCP Relay, Relayd
QoS / Smart Queue Management (SQM)| Traffic priority queuing by
source/destination, service, protocol or port, traffic priority queuing by
source/destination, service,
protocol or port, WMM, 802.11e
DDNS| Supported >25 service providers, others can be configured manually
Network backup| VRRP, Mobile, Wired and WiFi WAN options, each of which can be
used as backup, using automatic Failover
Load balancing| Balance your internet traffic over multiple WAN connections
SSHFS (optional)| Possibility to mount remote file system via SSH protocol (not
available in standard FW)
SECURITY
Authentication| Pre-shared key, digital certificates, X.509 certificates
Firewall| Pre-configured firewall rules can be enabled via WebUI, unlimited
firewall configuration via CLI; DMZ; NAT; NAT-T
Attack prevention| DDOS prevention (SYN flood protection, SSH attack
prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN,
SYN-RST, X-mas, NULL flags, FIN scan attacks)
VLAN| Port and tag based VLAN separation
Mobile quota control| Set up custom data limits for the SIM card
WEB filter| Blacklist for blocking out unwanted websites, whitelist for
specifying allowed sites only
Access control| Flexible access control of TCP, UDP, ICMP packets, MAC address
filter
VPN
OpenVPN| Multiple clients and server can be running simultaneously, 12
encryption methods
OpenVPN Encryption| DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-
CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC,
AES-192-CBC, AES-256-CBC
IKEv1, IKEv2, supports up to 4 x VPN IPsec tunnels (instances), with 5
encryption methods (DES, 3DES, AES128, AES192, AES256)
IPsec| GRE tunnel
GRE| Client/Server services can run simultaneously
PPTP, L2TP| Proxy designed to add TLS encryption functionality to existing
clients and servers without any changes in the programs’ code
Stunnel| SSTP client instance support
SSTP| ZeroTier VPN
ZeroTier| WireGuard VPN client and server support
MODBUS TCP SLAVE
ID filtering| Respond to one ID in range [1;255] or any
Allow Remote Access| Allow access through WAN
Custom registers| MODBUS TCP custom register block requests, which read/write
to a file inside the router, and can be used to extend MODBUS
TCP Slave functionality
MODBUS TCP MASTER
Supported functions| 01, 02, 03, 04, 05, 06, 15, 16
Supported data formats| 8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first);
32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB,
BADC)
MODBUS DATA TO SERVER
Protocol| HTTP(S), MQTT, Azure MQTT
MQTT GATEWAY
MQTT gateway| Allows sending commands and receiving data from Modbus Master
through MQTT broker
MONITORING & MANAGEMENT
WEB UI| HTTP/HTTPS, status, configuration, FW update, CLI ,troubleshoot, event
log, system log, kernel log
FOTA| Firmware update from sever, automatic notification
SSH| SSH (v1, v2)
SMS| SMS status, SMS configuration, send/read SMS via HTTP POST/GET
Call| Reboot, Status, WiFi on/off, Mobile data on/off, Output on/off
TR-069| OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS,
LibCWMP, Friendly tech, AVSystem
MQTT| MQTT Broker, MQTT publisher
SNMP| SNMP (v1, v2, v3), SNMP trap
JSON-RPC| Management API over HTTP/HTTPS
MODBUS| MODBUS TCP status/control
RMS| Teltonika Remote Management System (RMS)
IoT PLATFORMS
Cumulocity| Allows monitoring of: Device data, Mobile data, Network info,
Availability
Azure IoT Hub| Allows monitoring of: WAN Type, WAN IP Mobile Operator Name,
Mobile Signal Strength, Mobile Network Type
Clouds of things| Allows monitoring of: Device Model, Revision and Serial
Number, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal
Strength, WAN Type and IP
ThingWorx| Can send device IP, Number of bytes send/received/ 3G connection
state, Network link state, IMEI, ICCID, Model, Manufacturer,
Serial, Revision, IMSI, Sim State, PIN state, GSM signal, WCDMA RSCP WCDMA
EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID,
Operator, Operator number, Connection type, Temperature, PIN count to Azure
IoT Hub server
SYSTEM CHARACTERISTICS
CPU| Atheros Hornet, MIPS 24Kc, 400 MHz
RAM| 64 MB, DDR2
FLASH storage| 16 MB, SPI Flash
FIRMWARE / CONFIGURATION
WEB UI| Update FW from file, check FW on server, configuration profiles,
configuration backup, restore point
FOTA| Update FW/configuration from server
RMS| Update FW/configuration for multiple devices
Keep settings| Update FW without losing current configuration
FIRMWARE CUSTOMIZATION
Operating system| RutOS (OpenWrt based Linux OS)
Supported languages| Busybox shell, Lua, C, C++
Development tools| SDK package with built environment provided
INPUT/OUTPUT
Input| 1 x Digital input, 0 – 5 V detected as logic low, 8 – 30 V detected as
logic high
Output| 1 x Digital open collector output, max output 30 V, 300 mA
Events| SMS, EMAIL, RMS
POWER
Connector| 4 pin industrial DC power socket
Input voltage range| 9 – 30 VDC, reverse polarity protection, surge protection
33 VDC 10us max
PoE (passive)| Passive PoE over spare pairs (available from HW revision 0007 and batch number 0010). Possibility to power up through LAN
port, not compatible with IEEE802.3af, 802.3at and 802.3bt
Power consumption| < 6.5 W Max
PHYSICAL INTERFACES (PORTS, LEDS, ANTENNAS, BUTTONS, SIM)
Ethernet| 2 x RJ45 ports, 10/100 Mbps
I/Os| 1 x Digital Input, 1 x Digital Output on 4 pin power connector
Status LEDs| 3 x Connection type status LEDs, 5 x Connection strength LEDs, 2 x LAN status LEDs, 1 x Power LED
SIM| 1 x SIM slot (Mini SIM – 2FF), 1.8 V/3 V, external SIM holder
Power| 1 x 4 pin DC connector
Antennas| 2 x SMA for LTE, 1 x RP-SMA for WiFi antenna connectors
Reset| Reboot/Factory reset button
PHYSICAL SPECIFICATION
Casing material| Aluminium housing with DIN rail mounting option, plastic panels
Dimensions (W x H x D)| 83 x 25 x 74 mm
Weight| 125 g
Mounting options| Bottom and sideways DIN rail mounting slots
OPERATING ENVIRONMENT
Operating temperature| -40 C to 75 C
Operating humidity| 10 % to 95 % non-condensing
Ingress Protection Rating| IP30
REGULATORY & TYPE APPROVALS
Regulatory| CE/RED, FCC, IC/ISED, EAC, RCM, PTCRB, RoHS, WEEE, Wi-Fi Certified, CCC, Anatel, GCF, REACH, Thailand NBTC, Ukraine UCRF, SDPPI (POSTEL)
Operator| Verizon, AT&T
Vehicle| ECE R10 (E-mark)
EMI IMMUNITY
Standards| Draft EN 301 489-1 V2.2.0, Draft EN 301 489-17 V3.2.0, Draft EN 301 489-52 V1.1.0
FCC 47 CFR Part 15B (2017), ANSI C63.4 (2014)
RS| EN61000-4-2:2009
EFT| EN 61000-4-3:2006 + A1:2008 + A2:2010
ESD| EN 61000-4-4:2012
Surge immunity (AC Power Line)| EN 61000-4-5:2006
Surge immunity (Ethernet ports)| EN 61000-4-5:2014, clause 7.1 of ITU-T K21
CS| EN 61000-4-6:2009
DIP| EN 61000-4-11:2004
RF
Standards| EN 300 328 V2.1.1, EN 301 511 V12.5.1, EN 301 908-1 V11.1.1, EN 301 908-2 V11.1.1, EN 301 908-13 V11.1.1
FCC 47 CFR Part 15C (2017), FCC 47 CFR Part 2 (2017), FCC 47 CFR Part 22H (2017), FCC 47 CFR Part 24E (2017), FCC 47 CFR Part 27C (2017) RSS-Gen Issue 4 (2014), RSS-247 Issue 2 (2017), RSS-132 Issue 3 (2013), RSS-133 Issue 6 (2013), RSS-139 Issue 3, RSS-130 Issue 1 AS/CA S042.1:2018, AS/ACIF S042.3:2005, AS/CA S042.4:2018, AS/NZS 4268:2017
SAFETY
Standards| IEC 60950-1:2005 (Second Edition) + Am 1:2009 + Am 2:2013
AS/NZS 60950.1:2015 EN 50665:2017, EN 62311:2008 FCC 47 CFR Part 1 1.1310 RSS-102 Issue 5 (2015)
HARDWARE INSTALLATION
- Push the SIM button with the SIM needle.
- Pull out the SIM holder.
- Insert your SIM card into the SIM holder.
- Slide the SIM holder back into the router.
- Attach Mobile and WiFi antennas.
- Connect the power adapter to the socket on the front of the device. Then plug the other end of the power adapter into a power outlet.
- Connect to the device wirelessly using SSID and password provided on the device information label or use an Ethernet cable connected to LAN port.
LOGIN TO DEVICE
- To enter the router’s Web interface (WebUI), type http://192.168.1.1 into the URL field of your Internet browser.
- Use login information shown in image A when prompted for authentication.
- After you log in, you will be prompted to change your password for security reasons. The new password must contain at least 8 characters, including at least one uppercase letter, one lowercase letter, and one digit. This step is mandatory, and you will not be able to interact with the router’s WebUI before you change the password.
- When you change the router’s password, the Configuration Wizard will start. The Configuration Wizard is a tool used to set up some of the router’s main operating parameters.
- Go to the Overview page and pay attention to the Signal Strength indication (image B). To maximize the cellular performance try adjusting the antennas or changing the location of your device to achieve the best signal conditions.
TECHNICAL INFORMATION
Radio specifications
RF technologies| 2G, 3G, 4G, WiFi
Max RF power| 33 dBm@GSM, 24 dBm@WCDMA, 23 dBm@LTE, 20 dBm@ WiFi
| **Bundled accessories specifications*
Power adapter| Input: 0.4A@100-240VAC, Output: 9VDC, 1A, 4-pin plug
Mobile antenna| 698-960/1710-2690 MHz, 50 0, VSWR<3, gain 3 dBi,
omnidirectional, SMA male connector
WiFi antenna| 2400-2483.5 MHz, 50 0, VSWR<2, gain** 5 dBi, omnidirectional,
RP-SMA male connector
*Order code dependent.
**Higher gain antenna can be connected to compensate for cable attenuation
when a cable is used. The user is responsible for the compliance with the
legal regulations.
WHAT’S IN THE BOX?
*STANDARD PACKAGE CONTAINS**
- Router RUT240
- 9 W PSU
- 2 x LTE antennas (swivel, SMA male)
- 1 x WiFi antenna (swivel, RP-SMA male)
- Ethernet cable (1.5 m)
- SIM Adapter kit
- QSG (Quick Start Guide)
- RMS Flyer
- Packaging box
- For all standard order codes standard package contents are the same, execpt for PSU.
STANDARD ORDER CODES
PRODUCT CODE | HS CODE | HTS CODE | PACKAGE CONTAINS |
---|---|---|---|
RUT240 06E000 | 851762 | 8517.62.00 | Standard package with Euro PSU |
RUT240 01U000 | 851762 | 8517.62.00 | Standard package with US PSU |
RUT240 02U000 | 851762 | 8517.62.00 | Standard package with US PSU |
AVAILABLE VERSIONS
PRODUCT CODE | REGION (OPERATOR) | FREQUENCY |
---|---|---|
RUT240 *8**** | Europe, the Middle East, Africa, | |
Korea, Thailand, India, Malaysia | 4G (LTE-FDD): B1, B3, B7, B8, B20, B28A |
4G (LTE-TDD): B38, B40, B41
3G: B1, B8
2G: B3, B8
RUT240 *6| Europe, the Middle East, Africa,
Korea, Thailand, Malaysia| 4G (LTE-FDD): B1, B3, B7, B8, B20, B28A
3G: B1, B8
2G: B3, B8
RUT240 *0***| Europe, the Middle East, Africa,
Korea, Thailand, India, Malaysia| 4G (LTE-FDD): B1, B3, B5, B7, B8, B20
4G (LTE-TDD): B38, B40, B41
3G: B1, B5, B8
2G: B3, B8
RUT240 1| North America (AT&T, Bell, T-Mobile)1| 4G (LTE-FDD): B2, B4,
B12
3G: B2, B4, B5
RUT240 *2| North America (Verizon)| 4G (LTE-FDD): B4, B13
RUT240 *4***| South America, Australia, New Zealand, Taiwan| 4G (LTE-FDD):
B1, B2, B3, B4, B5, B7, B8, B28
4G (LTE-TDD): B40
3G: B1, B2, B5, B8
2G: B2, B3, B5, B8
RUT240 7| Global| 4G (LTE-FDD): B1, B3, B8, B18, B19, B26
4G (LTE-TDD): B41
3G: B1, B6, B8, B19
RUT240 000G| Japan| 4G (LTE-FDD): B1, B2, B3, B4, B5, B7, B8, B12,B13, B18,
B19, B20, B25, B26, B28
4G (LTE-TDD): B38, B39, B40, B41
3G: B1, B2, B4, B5, B6, B8, B19
2G: B2, B3, B5, B8
RUT240 *5****| Europe, the Middle East, Africa,
Korea, Thailand, India (Vodafone)| 4G (LTE-FDD): B1, B3, B5, B7, B8, B20
4G (LTE-TDD): B38, B40, B41
3G: B1, B5, B8
2G: B3, B8
The price and lead-times for region (operator) specific versions may vary. For
more information please contact us.
1 – Router is not certified on T-Mobile, Bell network (In progress).
MOUNTING OPTIONS
DIN RAIL KIT
Parameter | Value |
---|---|
Mounting standard | 35mm DIN Rail |
Material | Low carbon steel |
Weight | 57g |
Screws included | Philips Pan Head screw #6-32×3/16, 2pcs |
Dimensions | 82 mm x 46 mm x 20 mm |
RoHS Compliant | V |
DIN RAIL KIT
- DIN Rail adapter
- Philips Pan Head screw #6-32×3/16, 2pcs for RUT2xx/RUT9xx
ORDER CODE | HS CODE | HTS CODE |
---|---|---|
PR5MEC00 | 73269098 | 7326.90.98 |
For more information on all available packaging options – please contact us
directly.
COMPACT DIN RAIL KIT
Parameter | Value |
---|---|
Mounting standard | 35mm DIN Rail |
Material | ABS + PC plastic |
Weight | 6.5 g |
Screws included | Philips Pan Head screw #6-32×3/16, 2pcs |
Dimensions | 70 mm x 25 mm x 14,5 mm |
RoHS Compliant | V |
DIN RAIL KIT
- Compact plastic DIN Rail adapter (70x25x14,5mm)
- Philips Pan Head screw #6-32×3/16, 2pcs
ORDER CODE | HS CODE | HTS CODE |
---|---|---|
PR5MEC11 | 73269098 | 7326.90.98 |
For more information on all available packaging options – please contact us
directly.
SURFACE MOUNTING KIT
Parameter | Value |
---|---|
Mounting standard | Flat surface mount |
Material | ABS + PC plastic |
Weight | 2×5 g |
Screws included | Philips Pan Head screw #6-32×3/16, 2pcs |
Dimensions | 25 mm x 48 mm x 7.5 mm |
RoHS Compliant | V |
DIN RAIL KIT
- Surface mounting kit
- Philips Pan Head screw #6-32×3/16, 2pcs
ORDER CODE | HS CODE | HTS CODE |
---|---|---|
PR5MEC12 | 73269098 | 7326.90.98 |
For more information on all available packaging options – please contact us directly.
RUT240 SPATIAL MEASUREMENTS & WEIGHT
MAIN MEASUREMENTS
W x H x D dimensions for RUT240:
Device housing*: | 83 x 25 x 74 |
---|---|
Box: | 173 x 71 x 148 |
*Housing measurements are presented without antenna connectors and screws; for measurements of other device elements look to the sections below.
TOP VIEW
The figure below depicts the measurements of RUT240 and its components as seen
from the top:
RIGHT VIEW
The figure below depicts the measurements of RUT240 and its components as seen
from the right side:
FRONT VIEW
The figure below depicts the measurements of RUT240 and its components as seen
from the front panel side:
REAR VIEW
The figure below depicts the measurements of RUT240 and its components as seen
from the back panel side:
MOUNTING SPACE REQUIREMENTS
The figure below depicts an approximation of the device’s dimensions when
cables and antennas are attached:
DIN RAIL
The scheme below depicts protrusion measurements of an attached DIN Rail:
Copyright © 2022, TELTONIKA
NETWORKS.
Specifications and information given in this document are subject to change
by TELTONIKA NETWORKS without prior notice.
Documents / Resources
|
TELTONIKA Networks RUT240 Industrial 4G LTE Wi-Fi
Router
[pdf] User Manual
RUT240 Industrial 4G LTE Wi-Fi Router, RUT240, Industrial 4G LTE Wi-Fi Router,
4G LTE Wi-Fi Router, Wi-Fi Router, Router
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>