TELTONIKA Networks TSW110 User Manual

TSW110

HARDWARE

FRONT VIEW
BACK VIEW

RJ45 LED MEANING

POWER SOCKET PINOUT

FEATURES

ETHERNET

LAN| 5 x LAN port, 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
PERFORMANCE SPECIFICATIONS
Bandwidth (Non-blocking)| 10 Gbps
Packet buffer| 128 KB
Jumbo frame support| 9216 bytes
MAC address table size| 2K entries
Connector| 4 pin industrial DC power socket
Input voltage range| 9 – 30 VDC, reverse polarity protection, voltage surge/transient protection
PoE (passive)| Passive PoE. Possibility to power up through LAN port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards
Power consumption (idle/max)| < 0.4 W/ <1.8 W
PHYSICAL INTERFACES (PORTS, LEDS)
Ethernet| 5 x RJ45 ports, 10/100/1000 Mbps
Status LEDs| 1 x Power LED, 10 x LAN status LED’s
Power| 1 x 4 pin DC connector
Ground| 1 x Grounding screw
PHYSICAL SPECIFICATION
Casing material| Full aluminum housing
Dimensions (W x H x D)| 100 x 30 x 85 mm
Weight| 227 g
Mounting options| DIN rail or wall mounting (additional kit needed), flat surface placement
OPERATING ENVIRONMENT
Operating temperature| -40 C to 75 C
Operating humidity| 10 % to 90 % non-condensing

HARDWARE INSTALLATION

1. Connect your main internet router/modem to TSW110 LAN port number 1.
2. Connect end devices (ex. Industrial PC, printers, IP phones, laptops) to TSW110 2 to 5 port.
3. Connect 4 pin power plug to TSW110 to power up switch.
   

TECHNICAL INFORMATION

Technical specifications

Input voltage range| 9 – 30 VDC
Max power consumption| <1.8 W

**Bundled accessories specifications***

Power adapter| Input: 0.4 A @100-240 VAC, Output: 9 VDC, 1 A, 4 pin plug

WHAT’S IN THE BOX?

STANDARD PACKAGE CONTAINS

• TSW110
• 9 W Euro PSU
• QSG (Quick Start Guide)
• Packaging box
  

STANDARD ORDER CODES

MOUNTING OPTIONS

DIN RAIL KIT

DIN RAIL KIT

• DIN Rail adapter
• Philips Pan Head screw #6-32×3/16, 2pcs for RUT2xx/RUT9xx

For more information on all available packaging options ­ please contact us directly.

COMPACT DIN RAIL KIT

DIN RAIL KIT

• Compact plastic DIN Rail adapter (70x25x14,5mm)
• Philips Pan Head screw #6-32×3/16, 2pcs

For more information on all available packaging options ­ please contact us directly.

SURFACE MOUNTING KIT

DIN RAIL KIT

• Surface mounting kit
• Philips Pan Head screw #6-32×3/16, 2pcs

For more information on all available packaging options – please contact us directly.

TSW110 SPATIAL MEASUREMENTS & WEIGHT

MAIN MEASUREMENTS

W x H x D dimensions for TSW110 :
*Device housing :  100 x 30 x 85
Box :** 173 x 71 x 148

*Housing measurements are presented without antenna connectors and screws; for measurements of other device elements look to the sections below.

TOP VIEW
The figure below depicts the measurements of TSW110 and its components as seen from the top:

RIGHT VIEW
The figure below depicts the measurements of TSW110 and its components as seen from the right side:
FRONT VIEW
The figure below depicts the measurements of TSW110 and its components as seen from the front panel side:

REAR VIEW
The figure below depicts the measurements of TSW110 and its components as seen from the back panel side:

MOUNTING SPACE REQUIREMENTS
The figure below depicts an approximation of the device’s dimensions when cables and antennas are attached:

DIN RAIL
The scheme below depicts protrusion measurements of an attached DIN Rail:

Copyright © 2021, TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by TELTONIKA NETWORKS without prior notice.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>