Paulmann 705.31 MaxLED 1000 LED Strip Instruction Manual
- June 11, 2024
- Paulmann
Table of Contents
Paulmann 705.31 MaxLED 1000 LED Strip
Product Information
- The product is a lighting system that comes in three variants: 705.31, 705.32, and 705.33.
- The product has an energy efficiency rating of A++ to G.
- The product has dimensions of 55.5mm.
- The product uses a Li-Ion battery (CR2025 1x Li-Ion Battery, 3V 150mAH).
- The product has a driver of 40VA for 705.31 and 60VA for 705.32.
- The product has a water protection rating of 0.
Product Usage Instructions
- Ensure that you have the correct variant of the product (705.31, 705.32, or 705.33) before use.
- Insert the CR2025 Li-Ion battery into the product.
- If using variant 705.31 or 705.32, connect the driver (40VA for 705.31 and 60VA for 705.32) to the product with the included cable (1.5m for 705.31 and 3m for 705.32).
- If using variant 705.33, turn the product on using the switch labeled “off/on”.
- Mount the product in a suitable location with a maximum distance of 4m for variant 705.31 and 5.5m for variant 705.32.
- Ensure that the product is protected from water (water protection rating of 0).
What’s In The Box
Tools
Dimension
Installation
Replaceability
(1) Light source or (4) operating device can be replaced by end users without
permanent damage to the luminaire. (2) Light source or (5) operating device
can be replaced by a qualified electrician without permanently damaging the
luminaire. (3) Light source or (6) operating device is not replaceable, the
luminaire must be replaced.
This product contains a light source with energy efficiency class
Paulmann Licht GmbH
Quezinger Feld 2 31832 Springe Germany
www.paulmann.com.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>