zigbee PE-L20ZCA 20W Wireless Dimming LED Driver User Guide

zigbee PE-L20ZCA 20W Wireless Dimming LED Driver

Product Information

The product is a versatile and user-friendly device that offers various features for seamless usage. It is designed to provideconvenience and efficiency in everyday tasks.

• Model: X>|
• Power Supply: 7S H
• Input Voltage: ((1&
• Output Voltage: &ODVV
• Dimensions: 789
• Weight: X&
• Compatibility: KkfXkf

Product Usage Instructions

1. Connect the power supply to the device using the provided cable.
2. Ensure that the input voltage is within the specified range ((1&).
3. Check the output voltage (&ODVV) to confirm it meets your requirements.
4. Place the device in a suitable location with proper ventilation to prevent overheating.
5. Use the compatible accessories (KkfXkf) for optimal performance.
6. Follow the manufacturer’s guidelines for installation and setup.
7. Refer to the user manual for detailed instructions on specific functions and features.
8. Always handle the device with care and avoid exposing it to water or extreme temperatures.
9. If you encounter any issues or require assistance, refer to the troubleshooting section of the user manual or contact customer support.

Following these instructions will help you make the most out of your product and ensure a smooth user experience.

Features

1. Controlled by Tuya mobile app
2. Built in Tuya ZigBee (Tuya Bluetooth) wireless control module
3. Mixing is used to control deep dimming without stroboscopic
4. AC input 200-250v range
5. Natural air cooling, moisture-proof, heat conduction, silica gel heat dissipation process
6. Multiple protection functions
7. Ultra small volume design
8. Crimping design, convenient and fast
9. 4 gear current selection

Application

1. Led two-color light source
2. Villa intelligent lighting
3. Access to third-party language control platform
4. High end commercial lighting

General description

1. The mobile phone TUYA app is used to control the brightness and color temperature. which is stable, not easy to drop the signal, has a long control distance and a large number, and has its own slow on and slow off function. The raw materials used are first-line brands, imported chip ultra deep dimming design, and the internal silicone heat conduction process is adopted to make the heat dissipation balance of electronic components more stable

Specification

Dimensions

Product Label

LED Current Selection

DIP switch for 4 optional currents’ quick selection( see the table below ).

Dimensions **

**

1. ZigBee is different from Bluetooth gateway, so different power supply should be selected according to different gateway
2. Please down load Tuya mobile app on the mobile phone control terminal. The specific operation is described in the app
3. Before the power supply is powered on, please connect the network and connect the router
4. The signal is greatly affected by environmental factors Please select a router of brand and bandwidth

Wiring

1. Input terminal wiring: suitable for wire gauge 22awg-14awg (0.5mm2 – 1.5mm2), stripping requires 9-10mm tin
2. Output terminal wiring: suitable for wire gauge 22awg-12awg (0.5mm2 – 1.5mm2), stripping requires 6-7mm tin
3. Output terminal wiring: the positive pole of the output LED is the common terminal, and the three wire led can be connected to one of the positive poles.

Working Curve

distortion characteristic curve

Efficiency VS Load

PF characteristic curve

Current VS Voltage

Dimming curve

The use of guidance

Unless otherwise specified, all specifications and parameters are measured at 230VAC input, rated load and 25 °C Ambient Temperature
This product has a press line cap at the input, with self-locking clamping. it can be opened up with a screwdriver. then you will see the input terminal connected with the AC line L and the null lime N. The output terminal connect a according to the product label, notice the positive and negative pole.

1. please pay attention to the distinction between input and out put, connect correctly. then power on
2. please connect first the load of the DC output, open the driver after checking; in the constant current mode, if power on at open circuit, please turn off the driver and can’t connect the LED until the electric energy stored by the output release, or it may damage the LED:
3. this type of driver is only limited to the use of the LED lamps ,the input voltage range is AC200-250V. the heat insulation cotton and other items that obstruct the heat dissipation of the product, which conforms to the product under the specified output voltage, current range, the use environment temperature is -20-45 degrees, and the surface can not cover the conditions of the environment, this product enjoys 5 years of free warranty.
4. the LED lamp doesn’t bright after the dimming driver is connected at the first time, please turn off the AC input and check as follow:
5. whether or not DC output bad contact:
6. whether DC output polarity is reversed, or the LED board is welded anti;
7. whether AC input is bad contact, test after eliminating these failures;
8. the device has good connection, LED lights, but the LED flicker, please turn off the AC input and check as follow:
9. whether or not the parameters and actual parameters match.
10. please timely communicate with us if you have any questions in the using, we will try our best to solve the problems with you.

Statement

The pictures and specifications are for reference, subject to the real object. If there is any change in the specifications, it will be notified separately

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>