HUSKY 410-113-0111 Rolling Cart User Guide
- June 12, 2024
- Husky
Table of Contents
HUSKY 410-113-0111 Rolling Cart
Product Information
The Rolling Cart Carrito Rodante Chariot is a versatile cart designed to assist with transportation and organization. It is equipped with four legs, two fixed castors, and two pivoting castors for easy maneuverability. The cart also features a tray on top for holding items securely during transportation. The product comes with all the necessary hardware for assembly, including screws, nuts, lock washers, and bolts.
Product Usage Instructions
- Before assembling the cart, read all the instructions provided in the user manual.
- CAUTION: Do not sit or stand on the cart as it may cause instability and potential injury.
- Assembly:
- Start by attaching the legs and castors:
* Lay the base (AA) on its side.
* Align the holes of one leg (A-B) with the corresponding holes along one of the inside corners of the base (AA).
* Insert four bolts (F) into the leg (A-B) and through the base (AA).
* Attach a fixed castor (D) to one end of the base and a pivoting castor (E) to the other end by threading the bolts (F) through the holes.
* Secure the castors to the bottom of the base using lock washers (G) and nuts (H).
* Repeat the process for the remaining legs and castors.
* Tighten all connections to ensure stability.
2. Attaching the tray:
* Place the assembled cart upside down on the tray (BB).
* Align the plastic pins located on top of each leg (A-B) with the receiver holes in the top of the tray (BB).
* Push down on the top of the tray to secure it in place.
* Ensure that the handle on the top tray is located over the pivoting castors for ease of use.
* Insert the connecting screws (I) between the legs (A-B) and the top of the tray (BB).
* Tighten all nuts to ensure a secure attachment.- Warning: Ensure that all screws are tightened with sufficient force to prevent loosening during usage.
- For further assistance or warranty details, please contact HUSKYTOOLS.COM at 1-888-43-HUSKY.
Safety Information
Read all instructions before assembling this cart.
CAUTION: Do not sit or stand on this cart.
Assembly
Attaching the legs and castors
IMPORTANT: Ensure you mount the fixed castors on one end of the base and the pivoting castors on the other end of the base.
- Lay the base (AA) on its side.
- Align the holes of one leg (A-B) with the holes along one of the inside corners of the base (AA)
- Insert four bolts (F) into the leg (A-B) and through the base (AA).
- Attach a castor (D or E) to the bottom of the base by threading the bolts (F) through the holes and securing to the bottom of the base using lock washers (G) and nuts (H). Repeat for the remaining legs and castors and tighten all connections.
Attaching the tray
Place the cart assembly upside down, on the (BB) tray.
Align the plastic pins located on top of each leg (A-B) into the receivers
holes in the top of the tray (BB). Push down on the top of the tray to the
seat the part. The handle on the top tray should be located over the pivoting
castors for ease of use.
Insert the connecting screws (I) between the legs (A-B) and the top of the
tray (BB). Should be tight for all nuts.
Warning: All screws should be tightening force.
Warranty
If within 2 years from the date of purchase, this Husky product fails due to a defect in materials or workmanship, return the product to any Home Depot retail store with a receipt indicating proof of purchase for free repair (or replacement if repair is not possible). This warranty only applies for 90 days from the date of purchase if this product is ever used in a commercial rental application. This warranty excludes incidental/inconsequential damages and failures due to misuse, abuse, or normal wear and tear. This warranty gives you specific right, and you may also have other rights, which vary from state to state.
Please see store or call 1-888-43-HUSKY for details.
HUSKYTOOLS.COM
Please contact 1-888-43-HUSKY for further assistance.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>