Pyle PDIC16106 In-Celling Speaker Installation Manual
- June 12, 2024
- Pyle
Table of Contents
Pyle PDIC16106 In-Celling Speaker
PDICf656
5_25 .. 750 Watt 2-Way Celling I Wall Speakers (Pair)
Specifications:
In-Wall / In-Ceiling System
- 2-Way Stereo Sound Speakers
- Includes (2) 5.25-inch Speakers
- 1/2′ High Compliance Polymer Tweeter
- Polypropylene Cone with Rubber Edge
- Mounts Flush on Walls or Ceilings
- Built-in Electronic Crossover Network
- Environmentally Friendly ABS Construction
- Perfect for Custom Installations & Applications
- Includes Changeable Round & Square Stain Resistant Grills
- Cut-Out Template for Easy Installation
Technical Specs:
150 Watt Rated Peak Power
- Frequency Response: 80Hz-20kHz
- Impedance: 16 Ohms
- Sensitivity: 88 dB
- Total Unit Dimensions (Diameter x Depth): 8.3″ x 3.2″
- Cutout Diameter: 6.8″, Cutout Mounting Depth: 3.0″
PDIC1666
6.5″ 200 Watt 2-Way Ceiling / Wall Speakers (Pair)
Specifications:
In-Wall /In-Ceiling System
- 2-Way Stereo Sound Speakers
- Includes (2) 6.5-inch Speakers
- 1/2″ High Compliance Polymer Tweeter
- Polypropylene Cone with Rubber Edge
- Mounts Flush on Walls or Ceilings
- Built-in Electronic Crossover Network
- Environmentally Friendly ABS Construction
- Perfect for Custom Installations & Applications
- Includes Changeable Round & Square Stain Resistant Grills
- Cut-Out Template for Easy Installation
Technical Specs:
200 Watt Rated Peak Power
- Frequency Response: 60Hz-20kHz
- Impedance: 16 Ohms
- Sensitivity: 89 dB
- Total Unit Dimensions (Diameter x Depth): 9.5″ x 3.4″
- Cutout Diameter: 7.9 Cutout Mounting Depth: 3.1″
PDIC1686
8″ 250 Watt 2-Way Ceiling / Wall Speakers (Pair)
Specifications:
In-Wall / In-Ceiling System
- 2-Way Stereo Sound Speakers
- Includes (2) 8-inch Speakers
- 1/2” High Compliance Polymer Tweeter
- Polypropylene Cone with Rubber Edge
- Mounts Flush on Walls or Ceilings
- Built-in Electronic Crossover Network
- Environmentally Friendly ABS Construction
- Perfect for Custom Installations & Applications
- Includes Changeable Round & Square Stain Resistant Grills
- Cut-Out Template for Easy Installation
Technical Specs:
250 Watt Rated Peak Power
- Frequency Response: 40Hz-20 kHz
- Impedance: 16 Ohms
- Sensitivity: 89 dB
- Total Unit Dimensions (Diameter x Depth): 11.2″ x 3.9″
- Cutout Diameter: 9.4″, Cutout Mounting Depth: 3.5″
- This product gets the patent of innovation of the structure, is easy to install.
- Use new environmental protection ABS material, with longer service life, not easy to change color.
INSTALLATION
The in-wall/in-ceiling speakers were designed to be easily installed. However, if you are unsure of your ability to prop-erly install these loudspeakers please contact your dealer or a quali fied installer.
TOOLS NEEDED
TROUBLESHOOTING
IF THERE IS NO SOUND FROM ANY OF THE SPEAKERS:
- Check that the receiver/amplifier is on and a source is playing.
- Check all wires and connections between the receiver/amplifier and speakers. Make sure all wires are connected. Make sure none of the speaker wires are frayed, cut punctured, or touching each other.
- Review the proper operation of your receiver/amplifier.
IF THERE IS NO SOUND COMING FROM ONE SPEAKER:
- Check the”Balance” control on your receiver/amplifier.
- Check all wires and connections between the receiver/amplifier and speakers. Make sure all wires are connected. Make sure none of the speaker wires are frayed, cut, punctured, or punching each other.
IF THERE IS LOW(OR NO)BASS OUTPUT:
- Make sure the connections to the left and right” speaker Inputs”have the correct polarity(+ and -).
- Consider adding a powered subwoofer to your system.
- In Dolby Digital or DTS modes, make sure your receiver/processor is correctly configured. When using a subwoofer, make sure the subwoofer output of the receiver/processor has been enabled. If no subwoofer is being used, make sure the left and right front and rear speakers have been configured as”LARGE” See your receiver/processor’s owner’s manual for further information on correct speaker configuration in Dolby Digital, DTS and other surround sound modes.
IF THE SYSTEM PLAYS AT LOW VOLUMES BUT SHUTS OFF AS VOLUME IS INCREASED:
- Check all wires and connections between the receiver/amplifier and speakers. Make sure all wires are connected. Make sure none of the speaker wires are frayed, cut punctured, or touching each other.
- If more than one pair of main speakers is being used, check the minimum impedance requirements of your receiver/amplifier.
Thank you for purchasing this PYLE in-wall/in-ceiling speaker system. It is a state-of-the-art product carefully designed and manufactured for your installation needs and has been thoroughly tested to ensure consistent and reliable performance. If you have any questions about the installation or operation of your PYLE in-wall in-ceiling speaker system which are not answered by this manual, contact your dealer immediately.
INCLUDED
IN-CEILING SPEAKERS
One pair of speakers with grilles. One pc of speakers with grills for PDIC1656/PDIC1666/PDIC1686/PDIC16106
SPEAKER PLACEMENT
FRONT SPEAKERS
REAR SPEAKERS
IN-CEILING
Proper placement of the speakers is an important step in obtaining the most realistic soundstage possible. These recommendations are for the optimum placement of the loudspeakers. Use these placement recommendations as a guide. Slight variations will not diminish your listening pleasure. The front speakers should be placed the same distance from each other as they are from the listening position. They should be placed at about the same height from the floor as the listener’s ears will be, with the tweeters aimed toward the listener at ear-level height. In a home theater configuration, the two surround, speakers should be placed slightly behind the listening position and ideally should face each other and be at a level higher than the listener’s ears. If that is not possible, they may be placed on a wall or in the ceiling)behind the listening position facing forward. The surround speakers should not call attention to themselves. They should provide a diffuse, ambient sound accompanying the main program material heard in the front speakers. In Dolby*Digital and DTS, systems aim the tweeters toward the listening position at ear-level height.
SPEAKER CONNECTIONS
CONNECTION TIPS
The wires for both speakers should be the same length. If one speaker is placed closer to the amplifier than the other, hide the excess wire behind the wall. Speakers and elec- tronics terminals have corresponding (+)and(-)terminals. We use red to denote the(+ ) terminal and black for the(-) terminal.it is important to connect both speakers identically:(+ jon the speaker to+Jon the amplifier and(-Jon the speaker to(-) on the amplifier Wireing*out of phase” results in thin sound, weak bass, and a poor stereo image. With the advent of multi-channel surround sound systems, connecting all of the speakers in your system with the correct polarity remains equally important in order to preserve the proper ambiance and directionality of the program material.
EXISTING CONSTRUCTION
IN-CEILING SPEAKERS
- Cut the drywall. Note: Always allow at least one-half inch between a wall stud and the speaker cutout or the locking tabs will not be able to swivel into place.
- Connect the speaker wires to the speaker.
- Screw down each of the four Phillips head screws. The locking tabs will swivel into place and secure the unit to the rear surface of the drywall. Put in the strips of adhesive to secure the grille.
- Replace the metal grille.
- Complete.
PyleUSA.com 1600-63rd Street Brooklyn, NY 11204 USA
FREQUENTLY ASKED QUESTIONS
What is an in-ceiling speaker?
An in-ceiling speaker is a type of audio speaker designed to be installed flush or recessed into the ceiling of a room, providing a discreet audio solution without taking up floor or wall space.
How do in-ceiling speakers work?
In-ceiling speakers work similarly to regular speakers. They convert electrical audio signals into sound waves by using a combination of drivers, such as woofers and tweeters, housed within a speaker enclosure that fits into the ceiling.
What are the benefits of using in-ceiling speakers?
The benefits of in-ceiling speakers include space-saving, aesthetic appeal (as they are hidden from view), and the ability to provide even sound distribution throughout a room.
Can in-ceiling speakers be used for home theater systems?
Yes, in-ceiling speakers can be used as part of a home theater system, especially for surround sound applications to create an immersive audio experience.
How are in-ceiling speakers installed?
In-ceiling speakers are typically installed by cutting a hole in the ceiling, running speaker wires to the location, and securing the speaker in place with screws or brackets.
Are in-ceiling speakers suitable for all types of ceilings?
In-ceiling speakers are best suited for standard drywall or plaster ceilings. They might not work well with certain materials like concrete or vaulted ceilings.
Can in-ceiling speakers be used in bathrooms or humid environments?
Some in-ceiling speakers are designed for humid environments, such as bathrooms, and are moisture-resistant. However, it's essential to check the speaker's specifications to ensure suitability.
Do in-ceiling speakers require an amplifier?
Yes, in-ceiling speakers require an amplifier to power them. The amplifier provides the necessary electrical signals for the speakers to produce sound.
What is the sound quality of in-ceiling speakers compared to traditional speakers?
In-ceiling speakers can provide excellent sound quality, but high-end traditional speakers might still offer slightly better audio performance due to factors like enclosure design and placement.
Can in-ceiling speakers be used for outdoor installations?
Some in-ceiling speakers are designed for outdoor use and can withstand exposure to the elements. These speakers are typically labeled as weather- resistant or outdoor speakers.
Are in-ceiling speakers easy to maintain?
In-ceiling speakers are relatively low maintenance. Cleaning the grilles periodically and ensuring there is no dust accumulation can help maintain their performance.
How many in-ceiling speakers do I need for a room?
The number of in-ceiling speakers needed depends on the room size and audio requirements. For a stereo setup, two speakers are sufficient, while a surround sound setup may require more.
DOWNLOAD THE PDF LINK:Pyle PDIC16106 IN-CEILING SPEAKER INSTALLATION MANUAL
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>