DISNEY 23SV24034 LED Jack Skellington Instruction Manual

June 12, 2024
DiSNEY

DISNEY 23SV24034 LED Jack Skellington
DISNEY 23SV24034 LED Jack Skellington

READ AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE

ASSEMBLY REQUIRES AT LEAST 2 ADULTS. PLEASE FOLLOW THE STEP BY STEP GUIDE AND ENJOY LED JACK SKELLINGTON!

IMPORTANT TIPS:

  • Ensure that the item’s adapter is plugged in at the Function Control Box and in the wall.
  • Ensure that the switch on the function control box is on the desired setting.
  • If not functioning properly (ex: LEDs don’t light up), ensure that cables are connected to their corresponding cable as shown in the instruction sheet.
  • Be sure nothing is blocking movement or caught in moving parts.
  • Ensure that the floor or surface that the item sits on is flat and level.
  • Ensure that the volume is not all the way down.
  • Be sure nothing is blocking the sensor.
  • If the item still does not work, contact SVI Customer Service from 8:30am to 5:30pm PST at 1-855-428-3921, email customerservice@svius.com, or call Home Depot Customer Service from Mon-Fri 8:00am to 7:00pm and Sat 9:00 am To 6:00 pm EST at 1-877-527-0313

PARTS LIST

PARTS LIST

  • A. Right Base Half x 1
  • B. Left Base Half x 1
  • C. Shoes x 2
  • D. Lower Left Pole x 1
  • E. Lower Right Pole x 1
  • F. Left Pole x 1
  • G. Right Pole x 1
  • H. Costume x 1
  • I. Hip Frame x 1
  • J. Hip Hoop x 1
  • K. Chest Frame x 1
  • L. Arms x 2
  • M. Bow Tie x 1
  • N. Left Hand x 1
  • O. Right Hand x 1
  • P. Head x 1
  • Q. Scary Eye Set x 1
  • R. Tether Cable x 1
  • S. Base Extensions x 4
  • T. Stakes x 4
  • U. Adapter * x 1
  • Power Adapter Spec
    Input: 120VAC 50/60Hz
    Output: 5.9V 2.0A

Assembly Instructions

Assembly Instructions
Assembly Instructions
Assembly Instructions
Assembly Instructions
Assembly Instructions
Assembly Instructions
Assembly Instructions
Assembly Instructions
Assembly Instructions
Assembly Instructions
Assembly Instructions
Assembly Instructions
Assembly Instructions
Assembly Instructions
Assembly Instructions
Assembly Instructions
Assembly Instructions
Assembly Instructions
Assembly Instructions
Assembly Instructions
Assembly Instructions

LED JACK SKELLINGTON IS NOW FULLY ASSEMBLED. PLUG IN AND TURN ON TO LET THE FUN BEGIN!
Assembly Instructions

OPERATION INSTRUCTIONS

OPERATION INSTRUCTIONS

The LED Jack Skellington is powered by an adapter. Plug in the power adapter into a standard power outlet. To turn on LED Jack Skellington, press the button on the Function Control Box. Press the button again to switch to the Timer setting. Press the button a third time time to switch to the Sensor Setting.
Press the button a fourth time to turn the item Off.
The item is activated by pressing the button on the Function Control Box and has the following settings:

LIGHTS ONLY| This switch mode will activate the lights of the item. This switch mode does not have any animation or sound.
---|---
TIMER| Timer begins daily cycles of LIGHTS ONLY for 6hrs, then ALL functions off for 18hrs. LED Jack Skellington does not speak or move on Timer setting.
SENSOR| This switch mode will activate lights, sound, and animation when the Infra-red (IR) sensor is activated and will operate for 1 audio-cycle with each activation. The Infra-red (IR) sensor has a range of up to 2 m/6.5 ft. and will activate when someone comes within an 80-degree angle from left-to- right, as well as from above and below. LED Jack Skellington speaks and moves only when the control box is set to “SENSOR” and the sensor is activated. Between activations, LED Jack Skellington’s LEDs will remain on.
OFF • TRY ME| This setting will deactivate the lights, sound, and animation of the item. This mode also allows the item to be activated if triggered by using a Step Here Try Me Activation Pad (Not Included). The item will operate for one audio cycle with each Try Me activation.
| Raise or lower the volume using the volume control turn dial, turn all the way down to turn the volume off .

THE LED JACK SKELLINGTON IS COMPATIBLE WITH EXTERNAL TIMERS AND PRESERVES ITS SETTING WHEN THE POWER IS TURNED OFF/ON.

WARNING:

  • Lay product down before a storm or strong winds.
  • Don’t climb or pull on product.
  • Don’t add to or modify product.
  • Assemble and place the product on level surfaces only.
  • Don’t push or tilt product.

WARNING
This item is not a toy and should be used for decoration only. This item contains small parts that can be a choking hazard. Keep all plastic and wire parts away from children.

  1. Please use the adapter supplied by manufacturer.
  2. Please assemble item according to instructions. Connect all wires according to matching color.
  3. Children should be supervised by adults. Item should not be grabbed, as it becomes a tipping hazard. Keep flammables away from the adapter, as it heats up during operation.
    Please view all instructions carefully before assembling. Save this instruction sheet for future reference.

CARE AND STORAGE INSTRUCTIONS

When not in use, store this product in its original packing. Keep away from heat and moisture.
CARE AND STORAGE INSTRUCTIONS
CARE AND STORAGE INSTRUCTIONS

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna,
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or experienced radio/TV technician for help.
    CAN ICES-003(B)/NMB-003(B)

Customer Support

IF ANY PART IS MISSING OR BROKEN, DO NOT ATTEMPT TO ASSEMBLE THE PRODUCT AND CONTACT SVI CUSTOMER SERVICE FROM 8:30AM TO 5:30PM PST AT 1-855-428-3921, EMAIL CUSTOMERSERVICE@SVIUS.COM, OR CALL HOME DEPOT CUSTOMER SERVICE FROM MON-FRI 8:00AM TO 7:00PM AND SAT 9:00 AM TO 6:00 PM EST AT 1-877-527-0313.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals