TCI T-W60 PA Amplifier Series Instruction Manual

TCI T-W60 PA Amplifier Series

Product Information

The PA Amplifier Series WIFI/USB/BT Mixing Amplifier T-W60 is a portable mixing amplifier designed for small to medium PA installations. It features a USB player, Bluetooth, and WIFI receivers in a compact housing. The amplifier has a built-in WiFi wireless music streaming receiver, allowing you to connect your smart device via a free APP. It also has an RJ45 port on the rear panel as a backup for areas with weaker WiFi signals. The amplifier is equipped with a step-up transformer, making it suitable for any 70-volt or 100-volt line public address system. It can also provide 4-ohm and 8-ohm output loads. The rear panel includes three balanced XLR microphone inputs, with the option to prioritize MIC1 over the other inputs. MIC1 also has a 6.35mm jack on the front panel. The amplifier has volume controllers for inputs and master volume control for all inputs. It also features BASS and TREBLE tone controllers. Complete protection is provided for over-temperature, over-voltage, overload, and short-circuit speaker line conditions.

Product Usage Instructions

1. Connect the PA Amplifier to a power source using the provided power cord.
2. Ensure that the amplifier is turned off before connecting any audio devices.
3. If using a smart device for wireless music streaming, download and install the free WiFi APP from your device’s app store.
4. Turn on the amplifier and select the WiFi mode.
5. Open the WiFi APP on your smart device and follow the instructions to connect it to the amplifier.
6. Adjust the volume controller for each input source as desired.
7. Use the master volume controller to adjust the overall volume.
8. Use the BASS and TREBLE tone controllers to adjust the audio output to your preference.
9. If using microphones, connect them to the XLR microphone inputs on the rear panel.
10. If prioritizing MIC1 over other inputs, press the VOICE PRIORITY button.
11. Ensure all audio connections are secure and properly plugged in.
12. If any protection features are triggered (over-temperature, over-voltage, overload, or short circuit), check the speaker line conditions and resolve any issues before continuing to use the amplifier.
13. When finished, turn off the amplifier and disconnect it from the power source.

DESCRIPTION & FEATURE

This WIFI/USB/BT Portable Mixing Amplifier is designed as a convenient solution for small to medium PA installations with a USB player, Bluetooth, and WIFI receivers in a compact housing. Its outstanding feature of a WiFi wireless music streaming receiver supports connection with your smart device via a free APP, one RJ45 port is available on the rear panel as a backup for the point where the WiFi signal is weaker. Equipped with a step-up transformer to be best suitable for any 70-volt or 100-volt line public address system, at the same time 4-ohm and 8-ohm output loads are also provided. Three balanced XLR microphone inputs are fixed on the rear, via the button “VOICE PRIORITY” the MIC1 can be set with priority over the other inputs, moreover, the MIC1 has another port of 6.35mm jack on the front panel. Level controllers include a volume controller for inputs, a master volume controller for all, and BASS and TREBLE tone controllers. Complete protection is provided for over- temperature, over-voltage, overload, and short-circuit speaker line conditions.

• Built-in WiFi wireless music streaming receiver, Bluetooth receiver, and USB player.
• Connect with your smart device via the free app.
• Support AIRPLAY/DLAN/QPLAY.
• One RJ45 port is available for the point where the WiFi signal is weaker.
• 70/100-volt and 4/8 ohms(O) output loads.
• SMT circuit boards with highly stable performance.
• Powerful amplifier tubes.
• Three microphone jacks support an unbalanced 6.35mm plug.
• Mic 1 has priority over the inputs.
• High-definition display for the working status of the playing program.
• Individual volume controller for inputs, and master volume controller for all.
• BASS and TREBLE tone controllers.
• The protection is provided for output short circuits, overload, high temperature, and peak current limiters.

SPECIFICATION

Speaker Output Mode

| Low impedance:4 & 8 ohms (Ω)
Voltage line:70V & 100V
WiFi Solution| Legacy Wireless Hi-Fi System
WiFi APP Name| Legacy Player
WiFi APP Version| Android, iOS
Wi-Fi Mode| Wi-Fi 8.2.11 b/g/n(AP/STA modes supported)
Music Format| Supported with MP3, WMA, ACC(ACC+), Apple Lossless, ALAC, FLAC, APE, WAV
Frequency Response| 60 Hz ~ 20k Hz (± 3 dB)
T.H.D| <1% at 1kHz,1/3 rated power
S/N| =75dB
Tone Control| BASS:100 Hz (± 10 dB) , TREBLE:10k Hz (± 10 dB)
Audio Input| MIC, AUX, USB, BLUETOOTH, WIFI
Protection| Short circuit, overload, high temperature
AC Fuse| T1A
Power Supply| AC 220-240V- 50/60Hz
Power Consumption| 95W
Power Cord| (3×0.75 mm2 )×1.5M
Dimension| 100(H)×290(W)×260(D) mm
Carton Size| 160(H)×330(W)×320(D) mm
Net Weight| 5.50kg
Gross Weight| 6.30kg

Note: This device needs to be on a 2.4GHz Wi-Fi band.

• Specifications are typical; individual units might vary.
• Specifications are subject to change and improvement without prior notice.

CONNECTION ILLUSTRATION

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>