TCI-105 Ceiling Speaker User Manual
- September 9, 2024
- TCI
Table of Contents
TCI-105 Ceiling Speaker
Specifications:
General Specification:
- Model: CEILING SPEAKER TCI-106
- Frequency Response: 170mm
- SPL: 188*74mm
- Sensitivity: ABS (adull white)
- Power Handling: 5W/10W 100V
- Power Taps: Line input
- Hole for mounting Dimension(DH): 170mm 18874mm
Physical Specification:
- Material: ABS, Powder Coated Aluminum Mesh
- Grille Component Finished Colour: White ral 9016
- Unit Weight: 0.76Kg
Speaker Specification:
- Voice Coil Size: PSV20.40.122T
- DC Impedance: 7.2 Paper
- Former Magnet: Ferrite (153g)
- Basket Cone Material: ABS Paper Cloth Paper Cup
- Spider Dust cap Net Weight: 520g
Product Usage Instructions:
Installation Steps:
-
Cut Ceiling Hole to fit the speaker dimensions.
-
Connect Wiring according to electrical standards.
-
Retract the 2 Snap Clamps on the speaker into their open
position. -
Push the speaker up through the ceiling opening until Clamp
Arms press against the ceiling. -
The Snap Clamps will rotate and clamp down closed to secure the
speaker in position. -
Ensure both Snap Clamps are in the snap-down position for
secure installation.
Safety Tips:
Please read the detailed notes in the manual carefully and pay
attention to safety warnings. Keep the manual for future reference.
Understand and follow all security symbols and warnings to prevent
risks.
FAQ:
Q: Can this speaker be used in commercial buildings?
A: Yes, our speakers are suitable for use in commercial
buildings, hotels, supermarkets, schools, and various entertainment
venues.
Q: What is the power handling capacity of this speaker?
A: The speaker has a power handling capacity of 5W/10W at
100V.
Dimension:
170 188
Installation Steps:
74
188mm
CEILING SPEAKER TCI-106
Â25.400
1 Cut Ceiling Hole
2 Connect Wiring
3
Retract the 2 Snap Clamps on the speaker into their open position. Then push
the speaker up through the ceiling opening. When Clamp Arms press against the
ceiling, the Snap Clamps will rotate and clamp down closed to the ceiling
surface.
4 When inserted correctly, both 2 SnapClamps will be in the snap down position,thus securing the speaker securely into position in the ceiling.
Ceiling Speaker
TCI-106 User’s Manual
CEILING SPEAKER TCI-106
Dear customers: Your use of the this speaker series,we would like to extend my
heartfelt thanks to you, the commitment to keep its quality. Our speakers are
widely used for hotels, commercial buildings, supermarkets, schools, leisure
and entertainment venues, is your ideal choice. For your installation,
commissioning and use of this product, the installation please read this note.
Safety Tips
Please be sure to use the former reading detailed notes. Really pay attention
to this manual and a safety with the important warning. Recommend that you
keep this manual for future reference.
Common warning signs and security The manual shown warning signs and security
is to prevent the improper operation due to personal injury arising from the
loss of property, please read before using this product must understand that
this manual security symbols and Warning to indicate fully aware of potential
risks.
Warning
Such as the inappropriate use of staff will cause injury, death and property damage.
When installed loudspeakers Definitely will not be allowed to speakers and any exposure in the rain-wet or water, may be inconsistent with ,or fire. Restricted by the provisions of the speakers on the voltage, such as the us of high voltage may cause electric shock or fire disaster. Is no pruning, distorted, or replacement of damaged wires. Avoid instability in the installation or set up speakers, such as shaking the table or flat surface , the speaker can avoid falling caused personal injury or property damage. Speakers will be installed in support of the speaker or the weight of a solid shelf. Speaker swap can be avoided caused personal injury or property damage. Wet hands must not be admitted into or plugs, may lead to electric shocks. The allocation of plugs, make sure that pull plugs, rather than pull wires. The use of a damaged power line of machinery may cause fire or electric shock. Mobile speaker, you plug the prior allocated. If the speaker and plugs may be moving together will cause fire or electric shock.For plugs,identified as plugs for grip. Will not be allowed to speakers on the vent cover,may cause internal heating caused by the fire. Avoid speakers installed in the humidity or dust, direct contact with the sun from the nearelectric, or smoke or steam, may cause fire or electric shock
CEILING SPEAKER TCI-106
General Specification Model
Frequency Response SPL
Sensitivity Power Handling
Power Taps Line input Hole for mounting Dimension(D*H)
Physical Specification
Material
Grille
Component Finished Colour
Unit Weight
Speaker Specification
Voice Coil Size DC Impedance
Former
Magnet
Basket Cone Material
Spider Dust cap Net Weight
TCI-106 100-15KHz 90±3d8 (1M/1W)
93±3dB 10W
5W/10W 100V
170mm 18874mm
ABS( adull white) Powder Coated Aluminum Mesh
(White ral 9016) 6″
White 0.76Kg
PSV20.40.122T 7.2 Paper
Ferrite(153g) 7032*10(Y25)
ABS Paper Cloth Paper Cup 520g