TCI Mini Jolly Dali 20 User Guide
- June 7, 2024
- TCI
Table of Contents
Made in Italy
MINI JOLLY DALI 20
Direct current dimmable electronic drivers with DIP-SWITCH
Alimentatori elettronici regolabili in corrente continua con DIP-SWITCH
Rated Voltage
Tensione Nominale
110 ÷ 127 V (²)
220 ÷ 240 V
Frequency
Frequenza
50-60 Hz
AC Operation range
Tensione di utilizzo AC
99 ÷ 264 V
DC Operation range
Tensione di utilizzo DC
(see page info15)
176 ÷ 280 V
Power – Potenza
1 ÷ 20 W
iTHD
≤ 10% (¹)
Stand by power
≤ 0,5 W
Output current ripple
≤ 3% (¹)
Article Articolo| Code
Codice| Dimming
type| Pout
W| V out
DC(1)| I out
DC| U out
V| to
°C| tc
°C| i.. max.
Power
Factor| 11 max.
Efficiency”
---|---|---|---|---|---|---|---|---|---|---
DC MINI JOLLY DALI
DC MINI JOLLY DALI BI| 125403(4
151403(5
125403B1(4)
151403BI(5)| AM/PWM
AM
AM/PWIVI
AM| Constant current output – Uscita in Corrente costante| -25…+45| 75|
0.95 C| > 87
12 (12(2))| 15…49| 250 mA cost.| 55
17 (15(2))| 10…49| 350 mA cost.
19 (15(2))| 5…49| 400 mA cost.
20 (15(9| 5…45| 450 mA cost.
20 (15(9| 5…40| 500 mA cost.
20 (15(9| 3…36| 550 mA cost.
20 (15(9| 3…33| 600 mA cost.
20 (15(2))| 3…28| 700 mA cost.
Constant voltage output – Uscita in tensione costante
16 (15’2′)| 24 cost.| 700 mA max.| –
(1) Referred to Vin = 230 V, 100% load – Riferito a Vin = 230 V, carico 100%
(3) 125403BIS – 151403BIS – 125403BIBIS – 151403BIBIS:
order codes for BIS marked products – codici di ordine per i prodotti
marchiati BIS
Standards compliance
CSA C22.2 no. 223 (¹)
50172 (VDE 0108)
55015
61000-3-2
61000-3-3
61347-1
61347-2-13
61547
62384
62386-101
62386-102
62386-207
UL 1310 (²)
VDE 0710-T14
Max. pcs for CB B16A
(see page info17)
50 pcs
Inrush current
5A 50µsec
Features
-
Multipower driver supplied with dip-switch for the selection of the output current.
-
IP20 independent driver, for indoor use.
-
Class II protection against electric shock for direct or indirect contact.
-
Driver for built-in use (DC MINI JOLLY DALI BI).
-
It can be used for lighting equipment in protection classes I and II (DC MINI JOLLY DALI BI).
-
IP00, creepage distances, and clearances rely on the final application according to IEC/EN 60598-1 (DC MINI JOLLY DALI BI).
-
Active Power Factor Corrector.
-
Analogical input (NTC) for the thermal sensor connection.
-
Current regulation ±5 % including temperature variations.
-
Input and output terminal blocks on the same side (wire cross-section up to 1,5 mm 2 / AWG15).
-
Clamping screws on primary and secondary circuits for cables with diameter: PRI 5-8 mm / SEC 3-5 mm.
-
Protections:
– against overheating and short circuits;
– against mains voltage spikes;
– against overloads. -
Thermal protection = C.5.a.
Wiring diagram – Schema di collegamento (Max. LED distance on page info8 – Massima distanza LED a pagina info8)
DALI diagram – Collegamento DALI
Operation Mode
-
Features DALI dimming (0/0,5 – 100 %):
– memory function for sets or light groups;
– recall of stored functions;
– compatible with standard DALI interfaces. -
(6) Designed to work with DALI-2 systems.
-
(4) Default dimming AM+PWM: 1-25% PWM 2 kHz+25-100% AM.
-
(4) Full PWM dimming (240 Hz – 1-100%) available by short circuit of NTC for during switch-on of the driver. The same operation to reset to AM+PWM.
-
(5) Full AM DIMMING: 1 – 100%.
For additional details for regulations see pages info12-14.
Dimmable multipower drivers – Compact case – DALI
TCI professional LED applications
www.tci.it