VISUAL COMFORT TOB 1153 Caron Floor Lamp Instruction Manual

VISUAL COMFORT TOB 1153 Caron Floor Lamp

Product Information

The Caron Floor Lamp (Item # TOB 1153) is a light fixture designed to provide illumination in a room. It comes with various components that need to be assembled for proper usage. Please follow the assembly instructions below to ensure safe and effective
installation.

Product Usage Instructions

1. Carefully remove all parts from the box and place them on a clean, soft surface.
2. Thread the body tube (C) to the base (B).
3. Thread the shade riser (D) to the top of the lamp body. Adjust the shade riser (D) to the desired height and tighten the adjustment knob.
4. Remove the finial (F) from the shade riser (D).
5. Remove the shade (E) from its packaging and install it to the shade riser (D) by securing it with the finial (F). If the shade has additional packaging, carefully cut it off from the interior of the shade to avoid damages.
6. Install light bulbs into the sockets.
7. Remove the protective cover (A) from the plug.
8. Plug the lamp into an electrical outlet and test the fixture.

Note: Before installing the Caron Floor Lamp, make sure to comply with all applicable local installation codes. It is recommended that the installation be carried out by a person familiar with the construction and operation of light fixtures and aware of the potential hazards involved. Inspect all parts and contents carefully before installation. If any damage or defect is found, do not proceed with installation. Retain all packaging material until the installation is complete and approved.

Care Instructions To maintain the lamp’s cleanliness, clean it only with a soft dry cloth or feather duster. Avoid using abrasive or chemical agents as they may damage the lamp’s surface.

NOTICE:

This light fixture should be installed in accordance with all applicable,local installation codes, and by a person familiar with the construction and operation of it, as well as the hazards involved. Inspect item and contents carefully. If any damage or defect is found, do not install. Retain all packaging material until installation is complete and approved.

TOOLS REQUIRED

(NOT INCLUDED):

Scissors

ASSEMBLY INSTRUCTIONS

1. Carefully remove all parts from the box. Place on a clean, soft surface.

2. Thread body tube (C) to base (B).

3. Thread shade riser (D) to the top of lamp body. adjust shade riser (D) to desired height, the tighten adjustment knob.

4. Remove finial (F) from shade riser (D).

5. Remove shade (E) from packaging and install to shade riser (D) by securing with finial (F).
   NOTE: If shade has additional packaging, carefully cut off from interior of shade to avoid damages.

6. Install light bulbs into the sockets.

7. Remove protective cover (A) from plug.

8. Plug into electrical outlet and test fixture.

Care Instructions: Clean only with a soft dry cloth or feather duster. Do not use abrasive or chemical agents.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>