VISUAL COMFORT SP 1022 Hackney Floor Lamp Instruction Manual

VISUAL COMFORT SP 1022 Hackney Floor Lamp

NOTICE:

This light fixture should be installed in accordance with all applicable, local installation codes, and by a person familiar with the construction and operation of it, as well as the hazards involved. Inspect item and contents carefully. If any damage or defect is found, do not install.

Retain all packaging material until installation is complete and approved.

TOOLS REQUIRED (NOT INCLUDED):

Scissors

ASSEMBLY INSTRUCTIONS

1. Carefully remove all parts from the box. Place on a clean, soft surface.

2. Thread top tube (D) to bottom tube (E).

3. Remove socket ring (A) from socket (C).

4. Remove shade (B) from packaging and place on socket (C) by securing with socket ring (A).
   NOTE: If shade has additional packaging, carefully cut off from interior of shade to avoid damages.

5. Install light bulb into the socket (C).

6. Remove protective cover (F) from plug.

7. Plug into electrical outlet and test fixture.

Care Instructions:

Clean only with a soft dry cloth or feather duster. Do not use abrasive or chemical agents.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>