VISUAL COMFORT TOB 3222 Mia Table Lamp Instruction Manual
- June 12, 2024
- VISUAL COMFORT
Table of Contents
VISUAL COMFORT TOB 3222 Mia Table Lamp
Product Information
The Mia Table Lamp (Item # TOB 3222) is a light fixture designed for indoor use. It features a bulb socket (A), a lamp shade (B), asocket ring (C), and a protective plug cover (D). The lamp requires a bulb, which is not included with the product.
It is important to note that the installation of this light fixture should be done in accordance with all applicable local installation codes. It should be installed by a person who isfamiliar with its construction and operation, as well as the potential hazards involved.
Prior to installation, carefully inspect the item and its contents. If any damage or defect is found, do not proceed with installation. Retain all packaging material until installation is complete and approved.
Product Usage Instructions
- Carefully remove all parts from the box.
- Place the lamp shade (B) onto the bulb socket (A) and secure it with the socket ring (C).
- Insert a bulb (not included) into the socket.
- Remove the protective plug cover (D) from the plug.
- Plug the lamp into a proper electrical outlet.
- Test the fixture to ensure it is functioning correctly.
- The installation is complete.
Care Instructions
To clean the Mia Table Lamp, use only a soft dry cloth or a feather duster. Do not use abrasive or chemical agents, as they may damage the lamp’s surface.
Note: This product is listed and approved for use in the United States.
NOTICE:
This light fixture should be installed in accordance with all applicable, local installation codes, and by a person familiar with the construction and operation of it, as well as the hazards involved. Inspect item and contents carefully. If any damage or defect is found, do not install. Retain all packaging material until installation is complete and approved.
ASSEMBLY INSTRUCTIONS
- Carefully remove all parts from the box.
- Place shade (B) onto the socket (A) and secure witn socket ring (C).
- Insert bulb (not included) into the socket.
- Remove protective plug cover (D) from the plug.
- Plug into a proper electrical outlet and test the fixture.
- Installation is complete.
Care Instructions: Clean only with a soft dry cloth or feather duster. Do not use abrasive or chemical agents.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>