VISUAL COMFORT RL 1560 Northport Floor Lantern Instruction Manual
- June 12, 2024
- VISUAL COMFORT
Table of Contents
VISUAL COMFORT RL 1560 Northport Floor Lantern
Product Information
The Northport Floor Lantern Item # RL 1560 is a light fixture that requires assembly and installation. It comes with CE, SAA, and UK plug adapters. The lantern has a dimmer switch (E) that allows you to adjust the brightness between low, medium, high, and off settings. The product is listed and approved for use in the US.
Product Usage Instructions
- Carefully remove all parts from the box and place them on a clean, soft surface.
- Insert the quick plug (D) into the base of the fixture (A).
- Install the plug (B) to the adapter (C) as shown in Diagram 1.
- Plug the lantern into an electrical outlet.
- Test the fixture to ensure it is working properly.
- To adjust the brightness, touch the dimmer switch (E) to switch between low, medium, high, and off settings.
Care Instructions
- Clean the lantern only with a soft dry cloth or feather duster.
- Do not use abrasive or chemical agents for cleaning.
ASSEMBLY INSTRUCTIONS
Northport Floor Lantern
Item # RL 1560
NOTICE:
This light fixture should be installed in accordance with all applicable,
local installation codes, and by a person familiar with the construction and
operation of it, as well as the hazards involved. Inspect item and contents
carefully. If any damage or defect is found, do not install. Retain all
packaging material until installation is complete and approved.
-
Carefully remove all parts from the box. Place on a clean, soft surface.
-
Insert quick plug (D) into the base of fixture (A).
-
Install plug (B) to adapter (C) as shown in diagram 1.
Note: CE, SAA & UK plug adapters included. -
Plug into electrical outlet and test fixture.
Dimmer switch operation: Touch dimmer (E) to adjust between low, medium, high and off settings.
Care Instructions
Clean only with a soft dry cloth or feather duster. Do not use abrasive or chemical agents.