thermaltake CL-W320-PL14BL-A TOUGHLIQUID 280 ARGB Sync Installation Guide
- June 7, 2024
- thermaltake
Table of Contents
TOUGHLIQUID 280 ARGB Sync
Parts List
Intel Installation Guide
AMD Installation Guide
Installation Guide
ARGB Controller Installation Guide
CAUTION
To use the ARGB Controller, please only connect Cable E to the water block
-
Light Mode:
Switch over between 7 LED modes.
Rainbow Full light RGB Spectrum Off Flow Radar Pulse Blink -
Color Mode:
When light mode is in Full Lighted, Pulse and Blink:
Switch over 8 LED colors .
Red → Yellow → Green → Teal → Blue → White → Purple → Rainbow
When light mode is in Ripple:
Switch over 7 LED colors .
Red → Yellow → Green → Teal → Blue → White → Purple
When light mode is in RGB Spectrum:
Click to memorize and lock the color you want, click again to unlock the 256 colors auto rotation.
When light mode is in Wave and Flow:
LED color can not be adjusted. -
Light Speed:
Switch over between 4 light modes.
Slow → Normal → Fast → Extreme
MB SYNC Installation Guide
CAUTION
- To use Motherboard RGB Software, please only connect Cable F to the water block
- Please power off the PC and check the Positive and Negative ends on the connector before connecting the cable to the mainboard. Connecting the wrong end can damage the product.
© 2021 Thermaltake Technology Co., Ltd. All Rights Reserved.
www.thermaltake.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>