VISUAL COMFORT CS 2605 Leeds Small Round Sconce Instruction Manual

VISUAL COMFORT CS 2605 Leeds Small Round Sconce

Product Information

• Product Name: Leeds Small Round Sconce
• Item Number: CS 2605
• Manufacturer: N/A
• Product Description: The Leeds Small Round Sconce is a light fixture that provides illumination for indoor spaces. The fixture requires a bulb, which is not included in the package. It is important to install the sconce in accordance with local installation codes and by a person familiar with its construction and operation.
• Caution: Inspect the item and its contents carefully before installation. Do not install if any damage or defect is found. Retain all packaging material until installation is complete and approved.

Product Usage Instructions

1. Carefully remove all parts from the box and place them on a clean, soft surface.
2. Using a Phillips screwdriver, remove the screws (D) to detach the mounting plate (B) from the fixture (E).
3. Install the mounting plate (B) to the junction box and secure it with the provided mounting screws (C).
4. Wrap the fixture’s ground wire (bare copper) around the green grounding screw on the junction box and tighten it securely.
5. Connect the fixture’s wires to the corresponding wires in the junction box according to the local electrical code. Use wire connectors to secure the connections.
6. If applicable, attach any decorative elements or shades to the fixture.
7. Insert a compatible bulb into the fixture, following the manufacturer’s instructions.
8. Turn on the power and test the fixture to ensure it is functioning properly.

Care Instructions

Clean the Leeds Small Round Sconce only with a soft dry cloth or feather duster. Do not use abrasive or chemical agents that may damage the fixture.

NOTICE: This light fixture should be installed in accordance with all applicable, local installation codes, and by a person familiar with the construction and operation of it, as well as the hazards involved. Inspect item and contents carefully. If any damage or defect is found, do not install. Retain all packaging material until installation is complete and approved.

TOOLS REQUIRED (NOT INCLUDED)

• Phillips Screwdriver
• Slotted Screwdriver

ASSEMBLY INSTRUCTIONS

1. Carefully remove all parts from the box. Place on a clean, soft surface.
2. Remove mounting plate (B) from fixture (E) by removing screws (D).
3. Install mounting plate (B) to the junction box and secure with mounting screws (C).
4. Wrap fixture ground wire (bare copper) around the green grounding screw (see diagram 1). Tighten. Continue fixture ground wire and connect to supply ground wire (usually green or bare copper) using wire nut (A).
   • NOTE: It is imperative that the fixture is grounded.
5. Connect the fixture neutral wire (white) to the supply neutral wire (usually white) using wire nut (A).
6. Connect the fixture hot wire (black) to the supply hot wire (usually black) using wire nut (A).
   • CAUTION: Do not reverse the hot and neutral connections.
7. Make sure all wire connections are tight, then carefully tuck them into the junction box.
8. Install fixture (E) to mounting plate (B) and secure with screws (D).
9. Install a light bulb into the socket.
   • Care Instructions: Clean only with a soft dry cloth or feather duster. Do not use abrasive or chemical agents.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>