Rubine CUBO Series Non Pump Instant Water Heater Instruction Manual
- June 12, 2024
- Rubine
Table of Contents
Rubine CUBO Series Non-Pump Instant Water Heater
Product Information
- Series: CUBO
- Power Rating: 3.8kW, 240V, 50Hz
- Min. Water Pressure: 0.2bar / 20kPa / 2.9psi
- Min. Water Flow Rate: 1.2kg
- Inlet/Outlet Water Connector: Not specified
- Temperature Control: Not specified
- Product Dimension (WxDxH): 236 x 87 x 259 (mm)
- Water Heater Nett Weight: 1.2kg
Product Usage Instructions
-
Ensure that the water pressure is at least 0.2 bar / 20kPa / 2.9psi.
-
Connect the water heater to the water supply using the appropriate inlet/outlet water connector.
-
Install the water heater in a suitable location, ensuring proper ventilation and clearance according to the product dimensions (236 x 87 x 259 mm).
-
Make sure the power supply is compatible with the product’s power rating (3.8kW, 240V, 50Hz).
-
Use the temperature control feature, if available, to adjust the desired water temperature.
-
To ensure safety, the product is equipped with an Extra Safety DPDT Protection System. In case of any issues, a manual reset may be required.
-
The CUBO water heater has a matte finish that reduces scratches to a minimum, providing a more durable and aesthetically pleasing appearance.
-
The hand shower offers three spray patterns: Massage, Middle, and Wide. Additionally, there are two combination spray patterns available: (1+3) and (2+3).
-
To protect against water seepage, the product features a
splash-proof case cover with IEC-insulated protection, complying with the IP25 Standard. -
The heating element used in the water heater is of high quality and reliable, as it is UL-approved and utilizes UK technology.
Please note that specific installation and usage instructions may vary. Refer
to the complete user manual for detailed instructions and safety guidelines
for your specific model (RWH-C500N-WSW or RWH-C500N-MASW).
For pricing information, please contact your nearest authorized retailer: RCP
WM RM260 / EM RM274 for RWH-C500N-WSW and RCP WM RM240 / EM RM253 for RWH-
C500N-MASW.
features
Specification
- Power Rating: 3.8kW, 240V, 50Hz
- Min. Water Pressure : 0.2bar / 20kPa / 2.9psi
- Min. Water Flow Rate: 1.6l/min.
- Inlet / Outlet Water Connector: 015mm
- Temperature Control: Stepless Electronic
- Product Dimension W×DxH: 236 × 87 × 259 (mm)
- Water Heater Nett Weight 1.2kg
USING
SAFETY PROTECTION
EXTRA SAFETY DPDT PROTECTION SYSTEM
- Double Thermal safety cut-off, ensure an automatic halt to the temperature if it exceeds a certain point.
- 55°C Anti-scalding auto cut-off (Auto Reset)
- 80°C Abnormal overheat cut-off (Manual reset is required)
SCRATCH RESISTANCE
- The matte finishing on the CUBO water heater ensures that scratches will be reduced to a minimum.
SPLASHPROOF CASE COVER WITH IEC INSULTED PROTECTION
- Comply with IEC-approved Splash Proof Protection (IP25 STandard) water-proof cover to avoid any water seepage into the heater.
UL-APPROVED HIGH-QUALITY UK TECHNOLOGY HEATING ELEMENT
- Ensuring peace of mind with quality and reliable UL-approved heating elements.
Models
-
FIAMMA TRADING SDN. BHD. (330476-P) A Member of Fiamma Holding Berhad
-
2-1, Wisma Fiamma, No. 20, Jalan 7A/62A, Bandar Manjalara, 52200 Kuala Lumpur.
-
03-6279 8899
-
rubinemalaysia
Documents / Resources
|
Rubine CUBO Series Non Pump Instant Water
Heater
[pdf] Instruction Manual
RWH-C500N-WSW, RWH-C500N-MASW, CUBO Series Non Pump Instant Water Heater, Non
Pump Instant Water Heater, Instant Water Heater, Water Heater, Heater
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>