MIXX HTG02 StreamBuds Lynk 2 True Wireless Earbuds User Guide

June 6, 2024
MIXX

MIXX HTG02 StreamBuds Lynk 2 True Wireless Earbuds

MIXX HTG02 StreamBuds Lynk 2 True Wireless Earbuds

THANKS!
Thank you for choosing to buy our MIXX StreamBuds Lynk 2 earbuds.
All of our products come with a 2 year warranty for peace of mind.
Feedback is welcome, email us on support@mixx-io.com for any comments or queries.
We hope you enjoy using your new earbuds.

LET’S START

What’s in the box?
A pair of earbuds

  1. Left Touch Sensor
  2. Earbud LED Lights
  3. Right Touch Sensor
  4. Microphones
  5. Portable Charging Case
  6. USB C Charging Port (Back)
  7. Battery Digital Display
  8. Case Finger Tip Slots
  9. USB C Charging Cable
  10. 3 Pairs of Ear Cushions (S, M and L)

MIXX HTG02 StreamBuds Lynk 2 True Wireless Earbuds fig
1 MIXX HTG02 StreamBuds Lynk 2 True
Wireless Earbuds fig 2

LET’S CONNECT

First time pairing

Remove both earbuds from the Portable Charging Case 5 by placing the tip of your  finger in the Case Finger Tip Grooves 8 and gently lift the earbuds from the case.
They will automatically dual pair together and a ‘Beep’ will sound.
One of the Earbud LED light 2 will flash RED and BLUE to indicate pairing mode.

Go to the Bluetooth settings on your audio device to select ‘MIXX StreamBuds Lynk 2’ from the list. Once paired successfully you will hear ‘Connected’ and the Earbud LED Light 2 will turn off.
You can now enjoy your music, watch a video or take a call hands free.
The earbuds will automatically reconnect to the last device they were paired with, confirming ‘Connected’.
Placing both earbuds back in the Portable Charging Case 5 will power them off.

MIXX HTG02 StreamBuds Lynk 2 True Wireless Earbuds fig
3

LET’S ASK GOOGLE OR SIRI

Pair your Bluetooth device with your earbuds.
Double tap either Touch Sensor 1 or 3 to activate Siri or Google Assistant.
Your Voice Assist familiar ‘beep’ will sound to confirm connection.
You can now ask Siri or Google Assistant a question or state a command.

LET’S STAY CHARGED

The Earbuds

MIXX HTG02 StreamBuds Lynk 2 True Wireless Earbuds fig
4

A voice prompt ‘Battery low’ allows for 2 minutes play time before the earbud powers down stating ‘Battery low, power off’. The Earbuds LED Light 2 will
flash RED once and will then switch off.
Charge the earbuds by placing them in the Portable Charging case .5
Important! See the back of each earbud to view the left (L) and right (R) letters. Then place them in their respective slots in the charging case and close the lid to charge.
While charging, the Earbud LED Light 2 will be RED and once fully charged the LED Lights will turn off.

Each LEFT and RIGHT earbud has 4-line LED charge indicator L and R on the case 7

The 4 LED indicators L and R will flash to show that the earbuds are charging and will turn off once the earbuds are fully charged.

TIP: 15 MINUTE QUICK CHARGE
If you’re running low on power, charge your earbuds for 15 minutes and get 2 hours extra play time while on the go

The Portable Charging Case
To check the battery status of the case, place the earbud(s) inside to light up the Battery Digital Display . The number shows the percentage of the battery power remaining on the case for

30 seconds. This makes it easy to view when your low on power and when next to recharge the case.

Connect the case to a suitable USB wall charger, computer USB port or a power bank using the USB C charging cable 9 supplied.

When the LED Digital Displa By number reaches 100% the case is fully charged, and the display will switch off.
This can take up to 2 hours.

MIXX HTG02 StreamBuds Lynk 2 True Wireless Earbuds fig
5

LET’S PLAY

First Time Pairing
Remove both earbuds from the case.
Go to the Bluetooth settings on your audio device to select
‘MIXX StreamBuds Lynk 2’ from the list.
Once paired successfully you will hear ‘Connected’.

MIXX HTG02 StreamBuds Lynk 2 True Wireless Earbuds fig
6

Play / Pause
Long press for 2 seconds either Touch Sensor 1 OR 3

Decrease Volume
Single tap LEFT Touch Sensor 1

Increase Volume
Single tap RIGHT Touch Sensor 3

TOP TIP: For better noise isolation, comfort and sound quality ensure the correct sized (S, M or L) ear cushions (supplied) are fitted on the earbuds.

NOTE: Check the back of the earbuds for (L) and (R) letters to ensure you place them in the correct ears.

Answer / End call
Long press for 2 seconds either Touch Sensor 1 or 3

Decline an incoming call
Double-tap either Touch Sensor 1 or 3

Activate Siri or Google Assistant
Double-tap either Touch Sensor 1 or 3 to activate Siri or Google Assistant. Listen for the familiar Voice Assist ‘beep’ then ask a question or state a command.

Power On
Remove both earbuds from the case and they will automatically dual pair together. To manually turn on, long press for 3 seconds each Touch Sensor.

Power Off
Place both earbuds in the case and close the lid. This will automatically turn off the earbuds and the Bluetooth.

LET’S VIEW TECHNICAL SPECS

  • Play time on a single charge: Up to 6 hours
  • Play time with charging case: Up to 24 hours
  • Bluetooth: Version 5.1
  • Resistance: IPX4, water and dust resistant
  • Supported profiles: HSP, HFP, A2DP, AVRCP
  • Wireless range: 10m
  • Earbud capacity: 40mAh each side
  • Charge case capacity: 300mAh
  • Impedance: 16 Ohm
  • Sensitivity: 95dB at 1KHz
  • Dynamic driver: 10mm
  • Frequency response: 20Hz – 20KHz
  • Weight including case: Total 36g (earbuds 4g each)
  • Portable case dims: 57mm Ø x 30mm (H)

Compatibility
Suitable for most Bluetooth audio-supported smartphones, tablets, notebooks, laptops and computers.

CONTACT MIXX

Feedback is welcome simply email us on support@mixx-io.com or visit mixxaudio.com for more information.

NEED EXTRA HELP?

Common solutions
If you are experiencing problems with your earbuds:

  • Power on the earbuds (see page 6).
  •  Check the status on the LED Lights (see page 3).
  •  Charge the earbuds (see page 4).
  •  Move your device closer to the earbuds and away from any obstructions or interference.
  •  Try connecting to another device.

Question & Answers

Q. While pairing with my phone, I see two ‘MIXX StreamBuds Air 4’ in my Bluetooth menu listing?
A. One of the Earbud LED Lights will flash WHITE, wait approximately 4 seconds for the earbuds to connect to each other before pairing with your device.
If there is still no connection simply ‘forget’ or ‘unpair’ both earbuds in your Bluetooth settings, place them back in the case and start again.

Q. How do I turn on my earbuds without using the charging case?
A. Long press for 3 seconds both Touch Sensors to manually turn them on.

Q. Can I use the earbuds individually?
A. Yes, you can use one earbud while leaving the other in the case to charge. Swap them over when the earbud in use, loses its charge.

Q. What smartphone voice assist systems do these earbuds work with?
A. Connects with Siri, Google Assistant or Bixby (depending on your device).

LET’S BE SAFE

It’s important that you read this section completely, especially the ‘Warning, Caution and Safe Usage’ instructions.
For your protection
Ensure the product is correctly connected using the manufacturer’s original accessories included with the product.
Please keep the product out of reach from children and animals.
Do NOT listen to loud music for a long duration of time.

  •  We recommend turning down the volume before placing the device in or on your ears.
  • Adjust the volume to a comfortable level before listening to avoid hearing damage.
  • Do NOT use the product while operating machinery, including cars, trucks or other vehicles.
  • Do NOT use noise cancelling mode or use your device in areas where the use of hearing is required for safety. e.g., while riding a bicycle at a construction site or railroad etc.
  • Do NOT drop, short circuit, disassemble or continue to use this product and its portable charging case if damaged.

CAUTION!
Please remove your device from your ears immediately if:

  •  They emit any loud unusual noise
  •  You experience a warming sensation
  •  There is loss of audio

Turn off your device and contact MIXX Limited on support@mixx- io.com

IMPORTANT!
Do NOT use a non-certified PD or QC3 wall charger as this may damage the product. Only use the cable supplied to charge your device.
May contains small parts which may be a choking hazard. NOT suitable for children under age 6.

We recommend
To refer all servicing to qualified persons. Servicing may be required when the product has been damaged in any way, does not operate normally or has been dropped.

WARNING: The operating temperature range for this product is 5º – 40º celsius.
Please avoid exposing the product, charging case and cable connectors to prolonged rain, moisture, any splashing or liquid spills. This may cause excessive heat or melting and may lead to fire damage or personal injury.

CAUTION: This product contains a Lithium battery. Incorrect disposal of this battery may result in an explosion.

LET’S RECYCLE

  • This product can be recycled.
  • Products bearing this symbol must NOT be thrown away with normal household waste.
  • Take the product to a collection point designated for recycling of electronic devices.
  • Find out more about return and collection points through your local authority.

To view our wide range of power banks, chargers, cables and in-car products, visit us on mixxcharge.com

SAFE USAGE INFO
Do not crush, puncture or incinerate the charging case or the earbuds. Only use certified or device manufacturer’s charging cable.

MIXX Limited
5 The Pavilions, Brighton Road, Pease Pottage, West Sussex, RH11 9BJ. United Kingdom

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

MIXX User Manuals

Related Manuals