TOZO Golden X1 Wireless Earbuds User Manual

TOZO Golden X1 Wireless Earbuds

Touch operation (Operation in wearing one earbuds)

Double tap the “L” sensing area (“L sensing area” abbreviated as “L”), then skip to the previous song.
Tap the “L” or “R” sensing area to play or pause music.
Double tap the “R” to skip to the next song.

Active Noise Cancellation Control

Tap the “L” to switch between Transparency mode / Active Noise Cancellation mode/ Active Noise Cancellation off mode.

The Active Noise Cancellation function are not available when using single earbuds.

Calling control

Tap “L” or “R” sensing area to answer the call or it will answer the call automatically.
Long press “L” or “R” for 2 seconds the sensing area to hang up the call.
Long press “L” or “R” for 2 seconds the sensing area to reject the call.

Voice assistant

When using single or double earbuds, triple tap “L” or “R” then leave hold after hearing “BEEP” to wake up voice assistant.

Reset
If you accidentally get only one earbud work, or fails to pair each other, please reset it: Put earbuds into the charging case, open the lid, press and hold the case button for 10 seconds.

NOTE: In case there is [Connection Unsuccessful] in your devices, please delete all historical records of [TOZO Golden X1] and try the paring process again.

Low battery alarm
When the battery power is low, it will be reminded once every 2 minutes until the battery power is run out and turn off.

Earbuds charging
Put earbuds into the charging box to charge automatically.

Box wireless charging
Designed for modern life, you could use either charging cables or wireless charging pad for charging, enjoy the convenience of unplugged charging and instant charging. Wireless charging pad not included

Display of charging box power
Click / double clip the button of the charging box: Indicators displays the battery level of the charging box for 3s; Opening the charging box without earbuds in charging box, Indicators displays the battery level of the charging box for 3s. Opening the charging box with earbuds in charging box, Indicators displays the battery level of the charging box for 5s.

Indicator status

• Mode: Indicator status
• Power on: White light on 1 for 1 second.
• Power off: White light flashes 3 times, then light off.
• Bluetooth pairing: Pairing status: white light flashes quickly (flashing once in 0.5 seconds) (mobile phone/other device) Connection successfully: light goes off Standby mode: white light flashes twice every 5 seconds
• Incoming call: The indicator light flashes every 2 seconds.
• Earbuds charging: The earbuds are automatically charged when put into the charging case.
• Charging box charging: When charging, the last lights flashing, all lights are always on after fully charged.

TOZO APP
Download the TOZO App for UI customization, EQ settings and more.

• UI customization: Most of the controls can be customized in the App.
• EQ settings: There’re lots of EQ settings you can choose in the App to optimize your experience while enjoying different music genres.
• Earbuds firmware update: The earbuds firmware can be updated in the App. You will be informed once the new version of firmware is detected when you connect the earbuds with the App.

TOO APP pairing

Step 1: Download the TOZO App on your phone.

Step 2: Bluetooth pairing with your earbuds.

Step 3: TOZO App pairing with your earbuds.

Thanks for choosing our products
The earbuds provides you with the extraordinary experience of stable voice call and peaceful music sound in noisy surroundings with fashionable appearance and multiple functions, making them a great choice for you while working, going out and driving.

Origx
The exclusive sound technology developed by TOZO’s acoustic experts, achieving the golden frequency response curve in line with the characteristics of the human ear canal with an original lossless sound effect. TM ORIGX

Truly wireless Active Noise Cancellation technology
With the technology of earbuds, you can select compatible communication devices without using cables. Earbuds does not require keeping the phone facing earphones directly, but the maximum distance between them should not exceed 10 meters (about 30 feet). Using active noise cancellation technology, the microphones collect the noise, then the acoustic engineer calculates and designs a series of software and hardware algorithms, the circuit generates a reverse sound wave that is opposite to the noise and emits it through the horn. Finally, the noise and the reverse sound wave cancel each other.

Specifications

• Model: X1
• Active Noise Cancellation: 35dB
• Impedance: 2852
• Frequency Range: 12~44.1 KHZ
• Charging Port: Type-C
• Earphone Battery Capacity: 55mAh*2
• Charging Box Battery Capacity: 500mAh
• Charging Time of Earphone: 1.5H
• Charging Time of Charging Box: 2.5H
• Play Music Time (Active Noise Cancellation OFF): 6H
• Play Music Time (Active Noise Cancellation ON): 4.5H

Overview and packing list

Package contains TOZO Golden X1 earbuds, a charging box,6 sizes of ear buds (the M size ear buds are pre-installed on the earphones), USB-C charging cable, and instructions.

Earbuds function diagram

Touch control prompt
Please use the touching panel to control the earbuds. The sensing area is located in the earphone handle’s upper part.

Wearing earbuds
In order to obtain a better noise cancellation effect, the wearing angle can be adjusted appropriately after wearing, so that the earbuds is slightly pushed into the ear canal.

Choose the right earbuds
Appropriate sizes of ear buds are essential to noise cancellation experience, sound quality and comfort. Please try on different sizes of earbuds. Please note that you may need to use different sizes of earbuds for your left and right ears.

Power on/off

• Auto power on
  Open the cover of the charging box, the earbuds will power on automatically.

• Auto power off
  Put the earbuds into the charging box, close the cover, and the earbuds will power off automatically.

• Another method of power off
  Hold L or R for 5 seconds will power off when not playing media.

Earbuds pairing
In order for convenient use, the pairing between left and right earbuds has been completed before leaving from factory. When the cover is opened, earbuds would turn on and pair with each other automatically, and enter connection or pairing status.

Bluetooth pairing

1. Open the charging box, the left and right earbuds are automatically turned on and connected to each other.
2. Search for the Bluetooth pairing name [TOZO Golden X1] in the device and select it to complete the pairing.
3. When used again, the left and right earbuds will automatically reconnect to the last connected device.
4. For single earbuds use, pick up one side and keep the other side closed in the charging box. After the earbuds which is taken out failed to reconnect, it will enter the reconnecting mode after 2 seconds, and pairing coexistence with other device. After connecting the phone, take out another earbuds and enter binaural mode automatically.
5. If stay in the pairing or reconnecting state for 5 minutes in Active Noise Cancellation or Transparency mode, earbuds enter the standby mode automatically. If stay in the pairing or reconnecting state for 5 minutes in normal mode, earphones turn off automatically.

Another method of pairing
Open the charging box, keep the earbuds in the charging box, hold the charging box button 3s to force the earbuds to enter pairing status, then do steps 2 and 3 above.

NOTE: While the left and right earbuds are disconnected, put the earbuds in the charging box (open charging box), hold charging box buttons for 10 seconds to pair the left and right earbuds.

Bluetooth multipoint feature
Bluetooth multipoint allows a single Bluetooth headphone to maintain simultaneous connections to two source devices like a phone, pad, and laptop. Connect your TOZO Golden X1 to device A first, then turn off the Bluetooth on device A, SO that you can search and connect the same Bluetooth name [TOZO Golden X1] on your device B, then turn on the Bluetooth on device A to automatically re-connect. Now the two devices are connected to TOZO Golden X1 at the same time.

Note: The TOZO Golden X1 will play music from your last-operated device.

Bluetooth lost

1. Turn off mobile phone’s Bluetooth earbuds will enter the pairing mode and do not connect back. (If stay in the pairing or reconnecting state for 5 minutes in Active Noise Cancellation or Transparency mode, earbuds enter the standby mode automatically. If stay in the pairing or reconnecting state for 5 minutes in normal mode, earbuds turn off automatically.)
2. If the connection range is exceeded, it will enter the back-connection mode, and can pair with other devices at the same time. ( If stay in the pairing or reconnecting state for 5 minutes in Active Noise Cancellation or Transparency mode, earbuds enter the standby mode automatically. If stay in the pairing or reconnecting state for 5 minutes in normal mode, earbuds turn off automatically.)

Touch operation (operation in wearing of double earbuds)

Thank you for purchasing the TOZO authentic product.
For more latest products, parts and accessories, please visit: www.tozostore.com
For any assistance please contact
Email: info@tozostore.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>