infans TY326400 4-in-1 Push and Ride Stroller Tricycle User Manual

: June 4, 2024
: infans

Table of Contents

infans TY326400 4-in-1 Push and Ride Stroller Tricycle
Unpacking & 4 Stages
4-in1 Push and Ride Stroller Tricycle Parts List
4-in-1 Push and Ride Stroller Tricycle Features
Rear Wheel(s) & Front Wheel Assembly
Securing Child with 3-Point Safety Harness
Read User Manual Online (PDF format)
Download This Manual (PDF format)

infans TY326400 4-in-1 Push and Ride Stroller Tricycle

WARNING!
Read and follow all instructions before using the
4-in-1 Push and Ride Stroller Tricycle.
Please save the owner’s manual for future use.

ALWAYS ensure that all components are correctly fitted and adjusted before use. To avoid the danger of suffocation, remove all plastic covers before using the 4-in-1 Push and Ride Stroller Tricycle. Immediately destroy the plastic cover to keep it away from babies and children.
NEVER leave child unattended. ALWAYS keep child in view while in 4-in-1 Push and Ride Stroller Tricycle.
Prevent serious injury from falls or sliding out. ALWAYS secure child in the restraint with the 3-Point Safety Harness for children up to 24 months.
NEVER allow child to ride near stairs, steps, or escalators.
DO NOT carry child in 4-in-1 Push and Ride Stroller Tricycle up or down stairs.
When making adjustments to the 4-in-1 Push and Ride Tricycle, ALWAYS ensure that all parts of the child’s body are clear of any moving parts.
DO NOT use the Storage Basket to transport child.
DO NOT overload the Storage Basket, Maximum weight should not exceed S lbs.
ALWAYS engage the Rear Parking Brake(s) when placing and removing child from the 4-in-1 Push and Ride Stroller Tricycle.
DO NOT place any heavy bags, packages, or other items on the 4-in-1 Push and Ride Stroller Tricycle Parent Handle, Canopy, Seat Base Backrest, or Handrail as they can tip the
4- in-1 Push and Ride Stroller Tricycle over and injure the child.
DO NOT use if any part is broken, torn, or missing.
ALWAYS wear shoes when using the 4-in-1 Push and Ride Stroller Tricycle
DO NOT use with more than one child at a time.
DO NOT leave other children playing unattend near the 4-in-1 Push and Ride Stroller Tricycle.
DO NOT allow child to climb on or stand on.
To avoid the risk of fire, NEVER leave the 4-in-1 Push and Ride Stroller Tricycle near sources of strong heat such as open fires, electric heaters, and gas stoves. If the 4-in-1 Push and Ride Stroller Tricycle is exposed to direct sunlight, wait for it to cool down before placing your child in it.
This 4-in-1 Push and Ride Stroller Tricycle is recommended for children up to 5 years old, or for children who weight less than 49 pounds.
DO NOT use accessories, spare parts, and components other than those supplied by infans.
Ensure the person using the 4-in-1 Push and Ride Stroller Tricycle is responisble and knows how to use it safely.
Always apply the brakes when the 4-in-1 Push and Ride Stroller Tricycle is stationary.
NEVER leave the 4-in-1 Push and Ride Stroller Tricycle on a sloped surface with a child on board, even with the brakes engaged.
DO NOT use the stroller on a beach as the sand and salt could damage the 4-in-1 Push and Ride Stroller Tricycle.
DO NOT use any infant car seat with this product. Serious injury could occur.
DO NOT run, jog, or in-inline skate or participate in other athletic activity while using the 4-in-1 Push and Ride Stroller Tricycle.

Unpacking & 4 Stages

Unpack all contents of the 4-in-1 Push and Ride Stroller Tricycle and check that all parts are present before assembling. See PARTS LIST on Page 4 for full list of all items needed to assemble the 4-in-1 Push and Ride Stroller Tricycle. After checking all parts are present discard the packaging materials.
WARNING: Please make sure children are at a safe distance while you are assembling the 4-in-1 Push and Ride Stroller Tricycle.
4 Stages

4-in1 Push and Ride Stroller Tricycle Parts List

A. Canopy
B. Trim Cover
C. Handrail (Right)
D. Handrail (Left)
E. Plastic Seat Base
F. Tricycle Handle
G. Handle Frame Cover
H. Frame
I. Front Wheel Fender
J. Front Wheel
K. Parent Handle (Upper)
L. Parent Handle (Lower)
M. Harness Pads (x2)
N. 3-Point Safety Harness
0. Parent Handle Cap Screw
P. Storage Basket
Q. Rear Wheel (x2)
R. M6X28 Bolt (xl)
S. M6 Lock Nut (xl)
T. M6X30 Bolt (x2)
U. M6 Washer (x2)
V. M6 Lock Nut (x2)
W. Storage Basket Cap Screw
X. Allen Key
Y. Assembly Wrench

4-in-1 Push and Ride Stroller Tricycle Features

A. Canopy Axis
B. Canopy Post(s)
C. Bell
D. Soft Grip Handle(s)
E. Handle Rod
F. Handrail Release
G. Trim Cover Front Flap
H. Foot Peg Adjuster
I. Front Wheel Lock
J. Anti Skid Pedal(s)
K. Foot Pegs
L. Parent Handle Height Adjuster
M. Parent Handle Frame Opening
N. Rear Wheel Rod(s)
P. Rear Wheel Release(s)
Q. Rear Brake(s) (Left and Right)
R. Rear Wheel(s)
S. Handrail (Left and Right) Release(s)
T. Canopy Post Anchor(s)
U. Handrail Attachment Opening(s)
V. Upper 3-Point Harness Adjuster
W. Buckle Tongues (Left and Right)
X Buckle
Y. Lower 3-Point Harness Adjuster
Z. Front Wheel Rod

Rear Wheel(s) & Front Wheel Assembly

Rear Wheel(s)

Insert the Rear Wheel Rod into the Frame Opening with wheel on outer side until you hear a “click” 0. To remove the Rear Wheel depress the Rear Wheel Release Oand pull out
(See Fig. 1).

Front Wheel

Insert the Front Wheel Rod into the Front Wheel Fender G aligning the groove, then push into the Frame Opening Cl)
(See Fig. 2).
Insert the Tricycle Handle Rod through Handle Frame Cover G then align slots with the Front Wheel Rod. Push Tricycle Handle Rod down over Front Wheel RodG. Align the holes and insert the M6x28 Bolt into the hole and affix one M6 Lock Nut G to the end of the M6x28 Bolt. (The M6 Lock Nut should be on the front side of the Frame.)
Use the Assembly Wrench provided to tighen the M6 Lock Nut. DO NOT overÂtighten (See Fig. 3).
Plastic Seat Base
The Frame has 2 forward facing positions. Select the front O or back position 0 that best allows the child to reach the Anti Skid Pedals (See Fig. 4).
Insert one M6x30 Bolt down through one Plastic Seat Base opening G into either the front or back Frame position (l)
(See Fig. 4). Then place one M6 Washer on the end of the M6x30 Bolt, followed by one M6 Lock NutO
(See Fig. 5). Hand-tighten the M6 Lock Nut. Repeat process with second M6x30 Bolt inserting through the second Plastic Seat Base opening.
Use the Assembly Wrench provided to tighen the M6 Lock Nuts. DO NOT over-tighten.
Handrail
Insert the Handrail (Left) into the left Handrail Attachment Opening O on the Plastic Seat Base until you hear a “Click”. Then repeal process with Handrail (Right) (See Fig. 6).
Storage Basket
Align the Storage Basket with the Parent Handle Frame Opening O on the back of the Frame and push down (See Fig. 7).
Insert the Storage Basket Cap Screw O into the Storage Basket Cap Screw Opening and hand-tighten (See Fig. 7).

Parent Handle

Align the Parent Handle Upper G with the Parent Handle Lower and push in until “Click” (See Fig. 8).
Parent Handle
Insert the Parent Handle into the Parent Handle Frame Opening on the back, align the two tabs 0 to push the Parent Handle until it bottoms out 0 (See Fig. 9).
After the Parent Handle is in the Parent Handle Frame Opening, then thread the Parent Handle Cap ScrewG (See Fig. 10).

Parent Handle Adjustment

The Parent Handle can be adjusted to 1 of 4 height positions 8. To adjust, pull up the Parent Handle Height Release O which will unlock the Parent Handle allowing it to be adjusted into the desired position.
(See Fig. 11).
Trim Cover
lnsert the upper straps of the 3-Point Safety Harness through the upper openings of the Trim Cover 0. Then hook the top of the Trim Cover over the top of the Plastic Seat Base O (See Fig. 12).
The Trim Cover Front FlapG connects to the Handrail. The Trim Cover Front Flap has two buttons that can be unsnaped to wrap around the Handrail and then resnapped once attached (See Fig. 12).
Insert the lower strap 8 of the 3-Point Harness through the lower opening of the Trim Cover (See Fig. 12).
Harness Pads
Attach one Harness Pad to each of the upper straps of the 3-Point Safety Harness (See Fig. 13).
Canopy
lnsert the Canopy Posts O through the openings on the back side of the Trim Cover. Push the Canopy Posts into the Canopy Post Anchors O until hearing a “click” (See Fig. 14).
The Canopy can be opened holding the front of the canopy and pulling forward G (See Fig. 15).
To remove the Canopy, push the buttons C!> inward on the Canopy Posts and pull outward from the Canopy Post Anchors (See Fig. 15). DO NOT remove the Canopy at the Canopy Axis.
Raise or Lower the Foot Pegs
To raise or lower the Foot Pegs, pull Foot Peg Adjuster O away from the Frame and then rotate up or down (See Figure 17).
The Foot Pegs can then be folded inward or outward as required 0 (See Figure 17).

Front Wheel Unlock

For children 10 to 24 months, unlock the Front Wheel Lock so the pedals free spool. On the left side of the Front Wheel is the Front Wheel Lock, rotate clockwise O the wheel is unlocked and the pedals will free spool (See Fig. 18).
Front Wheel Lock
For Children 24 months up lock the Front Wheel Lock so the child can pedal the tricycle. On the left side of the Front Wheel is the Front Wheel Lock, rotate counter clockwiseO the wheel is locked and the pedals will drive the 4-in-1 Push and Ride Stroller Tricycle (See Fig. 18).

Securing Child with 3-Point Safety Harness

To prevent serious injury from falls or sliding out. ALWAYS secure child in the restraint with the 3-Point Safety Harness for children up to 24 months.
Buckle 3-Point Safety Harness

Place the Harness PadsO around the child’s shoulders. Interlock the Buckle Tongues O, then push them into the Buckle 8 until it “clicks” (See Figure 21). Adjust 3-Point Safety Harness After Buckle is connected, the 3-Point Harness can be adjusted with the Lower Adjuster 8 and/or the Upper Adjusters O for a snug fit (See Fig. 22). Release 3-Point Safety Harness
To release, apply pressure to both sides of the Buckle depressing the Buckle Tongues O until Buckle can be pulled downward away releasing both Buckle Tongues (See Fig. 23).