infans TQ10061 Mercedes-AMG GLE 63 Coupe Push Car Instruction Manual

infans TQ10061 Mercedes-AMG GLE 63 Coupe Push Car

Specifications

• Age Range: 1 year and above
• Weight Limit: 25 kg (55 lbs)
• Battery Type: AA (2 batteries required)

Product Usage Instructions

Part List

• Car body
• Armrest Guardrail
• Steering Wheel
• Push handle
• Seat back
• Canopy
• Safety Rail Buckle
• Footrest
• Cup Holder
• Screws: 410mm (2pcs), 412mm (4pcs)

Adult Assembly Instruction

1. Insert the Steering Wheel across the Safety Rail Buckle as shown in the figure.
2. Insert the Seat back as shown in the figure.
3. Locate the knob at the rear end and twist to secure the Armrest Guardrail as shown in the figure.
4. Insert the Push handle as shown in the figure.
5. Secure the Cup Holder on the Seat back as shown in the figure.
6. Assemble the Footrest according to the arrow direction as shown in the figure.
7. Assemble the Canopy with one step as shown in the figure.

Transformation from Push Car to Ride-on Car
This 2 in 1 Activity Push Car can be transformed into a ride-on car by following these steps:

1. Press the button to remove the canopy.
2. Press the button to unlock the safety rail buckle and remove the armrest.
3. Pull the footrest in the direction of the arrow to remove it.
4. Complete the transformation from a push car to a ride-on car.

Diagram of Steering Wheel Music Box
The Battery Cover is located on the steering wheel. Follow these steps to access and replace the batteries:

1. Use a Philip Screwdriver to unscrew the battery cover.
2. Insert two AA batteries according to the signs shown for the correct polarity (+, -).
3. Use a Philip Screwdriver to screw the battery cover back in place.

Warnings
Follow these warnings to ensure safety during usage:

1. The product is designed for children over 1 year old.
2. Keep small parts and plastic bags out of reach of children.
3. Children should ride this on flat and smooth surfaces, and should keep away from traffic roads.
4. The toy should be used under adult supervision.
5. Shoes must be worn during use.
6. Only one child seat is allowed.
7. All parts need to be assembled by an adult.
8. Weight should not exceed 25 kg (55 lbs).
9. Do not let children play alone with this product to prevent the danger of falling.

Before You Start

Please read all instructions carefully and keep it for future reference.

General Warnings

• Danger! Keep all small parts and packaging materials for this product away from babies and children, otherwise they may pose a choking hazard.
• The product must be installed and used under the supervision of an adult.
•  Read through each step carefully and follow the proper order.
• Remove all Packaging, separate and count all parts and hardware before installation.
• Please ensure that all parts are correctly installed, incorrect installation can lead to a danger.
• We recommend that, where possible, all items are assembled near the area in which they will be placed in use, to avoid moving the product unnecessarily once assembled.
• Ensure a secure surface during installation, and place the product always on a flat, steady and stable surface.

Executive Standard:

• GB6675.1-2014 GB6675.2-2014 GB6675.3-2014 GB6675.4-2014
• GB19865·2005
• Product Name: Mercedes-AMG GLE 63 Coupe Push Car
• Item No.6661 Material: PP, ABS, TPR
• Age: 1+
• Product Size: 93 x 48.5 x 91CM / 36.6″ x 19.1″ x 35.8″
• Weight Capacity: 25kg / 55 lbs

Part List

Adult Assembly Instruction

1. Insert the Steering Wheel to make it across the Safety Rail Buckle as shown in the figure.
2. Insert Seat back as shown in the figure.
3. Locate the knob at the rear end and twist to secure the Armrest Guardrail as shown in the figure.
4. Insert the Steering Wheel to make it across the Safety Rail Buckle as shown in the figure.
5. Insert the Push handle as show in the figure.
6. Secure the cup holder on the seat back as shown in the figure.
7. Assemble the footrest according to the arrow direction as shown in the figure.
8. Assemble the canopy with one step as shown in the figure.

Foot to Floor

This 2 in 1 Activity Push Car gives your little one so much to explore. After removing all the spare parts as shown above, it will perfectly transfers to a ride-on car.

1. Press button to remove the canopy.
2. Press button to unlock safety rail buckle, and remove the armrest.
3. Pull the footrest in the direction of the arrow as shown to remove.
4. Complete the transformation from a push car to ride-on car.

Diagram of Steering Wheel Music Box

This 2 in 1 Activity Push Car gives your little one so much to explore. After removing all the spare parts as shown above, it will perfectly transfers to a ride-on car

1. The Battery Cover is located on the steering wheel.
2. Use a Philip Screwdriver to unscrew the battery cover.
3. Insert Two AA batteries to place them according to signs shown (+,-).
4. Use a Philip Screwdriver to screw the battery cover.

Maintenance

1. Wipe clean with dry cloth on surface only.
2. Avoid direct Sun exposure.
3. Occasionally check to see that the nuts and bolts on all parts are secure and tight.
4. Always remove batteries when the unit is not going to be used for an extended period of time.

Battery Instructions

1. Batteries must be handled by adults only.
2. Keep all nuts and bolts out of reach of children as they may cause potential chocking hazard.
3. Hand in the non-working batteries to an appropriate waste disposal center.
4. Do not mix old and new batteries.
5. Use AA Size Batteries only.
6. Do not attempt to recharge non rechargeable batteries.
7. Rechargeable batteries are only to be charged under adult supervision.
8. Insert batteries to place them according to signs shown(+,-).
9. Always remove exhausted batteries.

Warning

1. Product is designed for Children over 1 year old.
2. Keep small parts and plastic bag out of reach of children.
3. Children should ride this on flat and smooth surface, and should keep away from traffic road.
4. The toy should be used under adult’s Supervision.
5. Shoes must be worn in use.
6. One Child seat only.
7. All parts need to be assembled by an adult.
8. Weight not exceeding 25 kg (55 lbs).
9. Do not let Children play alone with this product to prevent from danger of Falling.

WARNING: Keep small parts and plastic bag out of reach of children. Hand in the non-working batteries to an appropriate waste disposal center.

FAQ

• Q: How do I transform the push car into a ride-on car?
  • A: Follow the steps mentioned in the “Transformation from Push Car to Ride-on Car” section of the user manual.
• Q: How do I access and replace the batteries in the steering wheel?
  • A: Use a Philip Screwdriver to unscrew the battery cover, insert two AA batteries according to the signs shown for the correct polarity, and then screw the battery cover back in place.
• Q: How should I clean and maintain the product?
  • A: Wipe clean with a dry cloth on the surface only. Avoid direct sun exposure. Occasionally check that all nuts and bolts on all parts are secure and tight. Always remove batteries when the unit is not going to be used for an extended period of time.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>