INFANS TQ10055BK 12V Electric Kids Ride On Car User Manual
- June 9, 2024
- infans
Table of Contents
INFANS TQ10055BK 12V Electric Kids Ride On Car
- Suitable for 3+ Years
- Maximum user weight 66 lbs.
WARNNING: Must be assembled by an adult.
Read and understand this entire manual before using!
Please keep this m1111al for future reference a H contains Important
Information. Before first time use, charge the battery for at least 4-t boors,
but no more than 10 hours.
About Your New Vehicle
On the purchase of your new Ride-On.
This ride-on car will provide your child with many miles of riding of
enjoyment. To help assure you and your rider a safe ride we ask you to please
read this manual carefully, and keep it for future reference. Follow the
recommendations in this manual, they are designed to improve the safety and
operation of your ride-on car and its rider.
Specification
BATTERY INFORMATION
- Non-rechargeable batteries are not to be recharged.
- If removable rechargeable batteries are used,they are only to be charged under adult supervision
- Remove rechargeable batteries from the product before charging.
- Do not mix old and new batteries. Do not mix different types of batteries: alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium).
- Insert batteries as indicated inside the battery compartment, anode to anode, cathode to cathode
- Remove batteries during long periods of non-use. Always remove exhausted batteries from the product. Battery leakage and corrosion can damage this product. Dispose of batteries safely.
- Never shot circuit the battery terminals.
Parts List
Parts Diagram
Safety
PREVENT INJURIES AND DEATHS:
- NEVER LEAVE CHILD UNATTENDED. ADULT DIRECT SUPERVISION IS REQUIRED .Always keep child in view when child is in vehicle.
- This toy should be used with caution since skill is required to avoid falls or collisions causing injury to the user or third parties.
- Protective equipment should be l’IOrn.
- Never use in roadways, near cars, or on near steep inclines or steps, swimming pools or other bodies of l’later.
- Always wear shoes. always sit on the seat.
- Not to be used in traffic.
- This toy is unsuitable for children under 36 months due to its maximum speed; Maximum user weight is 66 lbs.
- This toy has no brake.
WARNING:
- CHOKING HAZARD! Not suitable for children under 36 months.
- Must be assembled by an adult.
Rules for Safe Riding
- Keep Children within Safe Riding Areas:
- Never use in roadway, near motor vehicles, on lawn space, on or near steep inclines or steps, swimming pools or other bodies of water;
- Use the toy only on flat surfaces. Such as inside your house, garden or playground.
- Never use in the dark. A child could encounter unexpected obstacles and have an accident. Operate the vehicle only in the daytime or a wellil area.
- It is prohibited to change the circuit or add other electric parts
- Inspect wires and connections of the vehicle periodically.
- Do not let any child touch the wheels or be near them when the car is moving
- This vehicle has adjustable play seat belts. Please instruct children how to tie the safety belt before using, guarantee the security.
Attach the wheel
-
Turn the toy car upside down, as shown in the picture above.
-
Push the wheel to the rear axle so that the wheel is well connected to the motor.
-
Place a gasket on the other side of the wheel.
-
Tighten the wheel with a MB nut.
-
Insert the wheel cover.
-
Install another wheel in the same way.
-
Flip the bottom of the toy car up, as shown in the picture above.
-
Slide the gasket into the front axle.
-
Push the wheel to the front axle.
-
Put a gasket on the other side of the wheel.
-
Tighten the wheel with a MB nut.
-
Insert the wheel cover.
-
Install another wheel in the same way.
Attach the Steering wheel &Mirror
- Loosen the nut and remove the bolt from the steering wheel.
- Connect the steering wheel terminal to the dashboard terminal, if the wire is too long, return it to the dashboard.
- Connect the two holes on the steering wheel with the holes on the dashboard, and then tighten with M5*35 round nuts.
Align the slot of the rearview mirror with the slot of the vehicle body, and press the rearview mirror into the gap.
Attach the Wind shield & Seat
Check the slot and press the windshield to the gap end according to the slot
position.
Install the seat on the body according to the picture, and tighten the seat
with cp4*14 self-tapping screws.
Plug the red connector on the vehicle body into the red connector from the
battery.
Use your new ride-on
When the ride toy car is out of power, you can pull it home with the help of
small wheels and handle.
When your child gets out of the car, please unlock the door button shown in
the picture above. When your child is driving, please don’t forget to lock the
door with the button above.
- Player
- Light switch: Turn on or off the light.
- Power button: To turn on or off the power.
- Forward/backward switch: Operate it together with the accelerator to make the vehicle forward/backward.
Use the Remote Controller (IF EQUIPPED)
Attach the batteries of controller
Lift the battery compartment door on the back of the controller and insert two
AAA(LR03) batteries.
-
Build connection
Long press the CODE buttons for 3 seconds and open the vehicle power to make the controller connect with the vehicle. This step is needed for the first time, and will not be necessary in the future. -
Brake button
Press the button to stop the vehicle, press it again to release the brake. -
Speed select button
The switch operates the vehicle to move in low, normal or high speed.
HINT: This switch won’t work while your vehicle moves reverse.
NOTE:
- Leave the remote controller idling for about 10 seconds, it will shut down automatically.
- Rebuild connection when you replace the batteries of the remote controller.
Charging
WARNING!
ONLY AN ADULT CAN CHARGE AND RECHARGE THE BATTERYI
This product with Charging Protection: when charging, all functions will be
cut off! Only an adult can charge and recharge the battery!
- The POWER SWITCH must be turned in OFF position when charging.
- Before the first use, you should charge the battery for 4-6 hours. Do not recharge the battery for more than 10 hours to avoid ovemeating the charger.
- When the vehicle begins to run slowly, recharge the battery.
- After each use or once a month minimum recharge time as 8 to 12 hours, less than 20 hours at most.
- Use the only rechargeable battery and charger supplied with your vehicle. NEVER substitute the battery or the charger with another brand. Using another battery or charger may cause a fire or explosion.
- Do not use the battery or charger for any other product.
- Plug the charger port into the input socket. (below the seat)
- Plug the charger plug into a wall outlet. The battery will begin charging.
Troubleshooting Guide
Maintaining
- It is parents’ responsibility to check main parts of the toy before using, must regularly examine for potential hazard, such as the battery, charge, cable or cord, plug, screws are fastening enclosure of other parts and that in the event of such damage, the toy must not be used until that damage had been properly removed.
- Make sure the plastic parts of the vehicle are not cracked or broken.
- Occasionally use a lightweight oil to lubricate moving parts such as wheels.
- Park the vehicle indoors or cover it with a tarp to protect it from wet weather.
- Keep the vehicle away from sources of heat, such as stoves and heaters. Plastic parts may melt.
- Recharge the battery after each use. Only an adult can handle the battery. Recharge the battery at least once a month when the vehicle is not being used.
- Do not wash the vehicle with a hose. Do not wash the vehicle with soap and water. Do not drive the vehicle in rainy or snowy weather. Water will damage the motor, electric system and battery.
- Clean the vehicle with a soft, dry cloth. To restore shine to plastic parts, use a non-wax furniture polish. Do not use car wax. Do not use abrasive cleaners.
- Do not drive the vehicle in loose dirt, sand or fine gravel which could damage the moving parts, motors or the electric system.
- When not using, all the electrical source should be turned off. Turn off the power switch and disconnect the battery connection.
Fuse
The battery features a thermal fuse with a rest fuse that will automatically
trip and cut all power to the vehicle if the motor, electric system or battery
is overloaded. The fuse will reset and power will be restored after the unit
is turned OFF for 20 seconds and then turned ON again. If the themal fuse
trips repeatedly during normal use, the vehicle may need repair. Contact our
customer service please.
To avoid losing power, follow these guidelines:
- Do not overload the vehicle.
- Do not tow anything behind the vehicle.
- Do not drive up steep slopes.
- Do not drive into fixed objects, which may cause the wheels to spin, causing the motor to overheat.
- Do not drive in very hot weather, components may overheat.
- Do not allow water or other liquids to come in contact with the battery or other electric components.
- .Do not tamper with the electric system. Doing so may create a short crcut, causing the fuse to trip.
Disposal Of Battery
- Your sealed lead-acid battery must be recycled or disposed of in an environ- mentally sound manner.
- Do not dispose of your lead-acid battery in a fire. The battery may explode or leak.
- Do not dispose of a lead-acid battery in your regular, household trash. The incineration, land filling or mixing of sealed lead-acid batteries with household trash is prohibited by law.
Our products are suitable for ASTM F963; GB6675; EN71 and EN62115 standard.