INFANS 6B Baby Balance Bike User Guide
- June 1, 2024
- infans
Table of Contents
Before You Start
Please read all instructions carefully and keep it for future reference.
General Warnings:
Danger! Keep all small parts and packaging materials for this product away
from babies and children, otherwise they may pose a choking hazard.
The product must be installed and used under the supervision of an adult.
Read through each step carefully and follow the proper order.
Remove all Packaging, separate and count all parts and hardware before
installation.
Please ensure that all parts are correctly installed, incorrect installation
can lead to a danger.
We recommend that, where possible, all items are assembled near the area in
which they will be placed in use, to avoid moving the product unnecessarily
once assembled.
Ensure a secure surface during installation, and place the product always on a
flat, steady and stable surface.
Warning!
This product can be assembled only by adults. It contains small objects with
sharp edges/corners before assembly.
Precautions
-
Caregivers should not leave while children are riding.
-
This product must be assembled by adults and used under adult supervision.
-
It will be very dangerous to bump into people or objects. Make sure there are no obstacles around before playing.
-
Please do not use it in places with obstacles such as slopes, uneven roads, ditches, stairs, porches, etc., and near open flames.
-
The use of public transportation roads such as roads and parking lots is prohibited; such toys require high skills. In order to ensure that users and third parties are protected from falls and collisions, please use them with caution. Protective equipment, such as helmets, knee pads, should be worn.
-
Do not use it when the user weighs more than 25kg (55lbs).
-
Please be careful not to get your fingers, hair, clothes, involved in the surrounding and rotating parts of the wheel.
-
Please do not use this product with two people at the same time.
-
It can only be used for riding, please do not use it for other purposes.
-
Do not use this product when the product is damaged, deformed or malfunctions.
-
Please do not put it in the rain. Pay attention to avoid moisture.
-
It may be dangerous to use the product in the state of failure.
The guardian must regularly check the integrity of the product. -
This product contains small parts and sharp edge hazards and is intended for adult assembly only.
-
Put away the plastic bags in time to avoid suffocation caused by children playing.
-
Do not place any load on this vehicle, otherwise it will affect the stability of the vehicle.
-
Please read this manual carefully before use and keep it for future reference. If not used in accordance with this instruction manual may affect the safety of children.
Product Information
- Product Name: Toddler Bike
- Suitable Age: 10-24 months
- Size: 55.5×25.5×38.5CM (22x10x15inch)
- Material: PP + Carbon Steel
- Net weight: 2.1KG (4.6LBS)
Component List
Assembly Instruction
- Insert the rear wheel into the main frame until the spring clips pop out, indicating that it is connected securely. (Pay attention to the direction of the spring clips).
- Insert the handlebar into the main frame and push it to the end so that the lower end of the handlebar is exposed. (Notice that the spring clips on the lower end of the handlebar face backwards)
- Insert the front wheel under the main frame so that the spring clips under the handlebar pop out to lock the front wheel.
- Insert the seat on the main frame, so that the spring clips pop out to secure the seat. The installation is complete.
Maintenance
- In order to ensure the normal and safe use of this product and protect your baby from accidental injury, please check and maintain the bike frequently.
- Check that the components are complete before assembly.
- Check regularly for loose screws and damaged parts.
- When installing and using each component, please check whether it is in good condition.
- Please clean the bike regularly. Do not to wash it with water. Wipe it with a dry cloth.