savio 5901986047278 CPU Cooler User Manual
- June 12, 2024
- Savio
Table of Contents
savio 5901986047278 CPU Cooler
Thank you for choosing Savio product!
If our product meets your expectations, share your opinion with other people
on the portal ceneo.pl, on social media or on the website of the store where
you made the purchase. If you want to show off our device on SAVIO FanPage on
Facebook, we will be very pleased.
If there is something that we could improve on our products, please write to
us at support@savio.net.pl Thanks to your
feedback, we will be able to better adapt the product to your expectations.
Before starting the use of purchased device it is recommended to read the
whole manual.
Package content
Technical specification
- TDP: 180W
- Cooler dimension with fan: 140x128x76 mm
- Number of heat pipes: 4 pcs
- Fan size: 120 mm
- Fan connector: 4-pin (PWM)
- Fan speed: 600-1500 RPM
- Intel compatibility: LGA 1200 / 1151 / 1150 / 1155 / 1156/ 1700
- AMD compatibility: AM3(+) / AM2(+) / FM2(+) /FM1 / AM4
Safety conditions for thermal grease
- Keep out of reach of children.
- It is forbidden to consume the product.
- In case of contact with the eye, you need to wash your eyes with a substantial amount of water.
- In case of inhaling fumes from the grease, it is necessary to go outside to breathe fresh air for a while.
- In case of ingestion it is not necessary to induce vomiting. Rinse your mouth with plenty of water.
- If you notice any side effects, not mentioned above, please contact medical support.
Safety conditions for heat sink and fan
- Use the product in accordance with its intended use, as improper use may damage the product.
- Do not expose the device to moisture.
- The device should be cleaned only with a dry cloth.
- Independent repairs and modification result automatic loss of the warranty.
- Hitting or dropping may damage the product.
Mounting the cooling system
Mounting the cooling system for INTEL processors
-
STEP 1
Place the transparent spacers in the right places on the mounting bracket. The drawing on the left presents which locations correspond to the right Intel processor socket.
-
STEP 2
-
Set the mounting braket in the marked places on the motherboard.
-
Secure it by inserting black safety pins into the transparent spacers.
-
STEP 3
-
Clean the processor IHS surface with a dry cloth or Isopropyl alcohol.
-
Apply thermal grease (for lowest temperatures, use SAVIO GLACIER thermal paste).
-
Remove protective film from the heat sink base and clean it with a dry cloth or isopropyl alcohol.
-
STEP 4
-
Put the cooling set (the heat sink and the cooling fan) on the processor.
-
Protect the cooling set with buckles on both sides of the heat sink.
-
STEP 5
-
Connect the fan power connector to the socket marked as ‘CPU FAN’ on the motherboard.
Mounting the cooling system for AMD processors
- STEP 1
- Clean the processor IHS surface with a dry cloth or Isopropyl alcohol.
- Apply thermal grease (for lowest temperatures, use SAVIO GLACIER thermal paste).
- Remove protective film from the heat sink base and clean it with a dry cloth or isopropyl alcohol.
- STEP 2
- In the case of AMD processors, use the original bracket/ mounting handle included in the motherboard set.
- Mount the bracket/mounting handle on the motherboard.
- Secure the cooling set with the buckles on both sides of the heat sink.
- STEP 3
- Connect the fan power connector to the socket marked as ‘CPU FAN’ on the motherboard.
Warranty:
The warranty covers a period of 24 months. Independent repairs and modifications result in automatic loss of the warranty. Warranty card is available for download on our website: www.savio.net.pl/en/service
Information for customers and contractors and communication regarding
complaints:
Pursuant to Article 13 section 1 and 2 of the General Data Protection
Regulation (EU) 2016/679 of the European Parliament and of the Council of 27
April 2016 (hereinafter referred to as GDPR), please be advised that Elmak Sp.
z o.o., with its registered seat at ul. Morgowa 81; 35-323 Rzeszów becomes the
Administrator of your personal data. The Specialist for General Data
Protection (SODO) can be contacted in writing to: SODO, Elmak Sp. z o.o., ul.
Morgowa 81; 35-323 Rzeszów, via e-mail address: sodo@elmak.pl, and by phone at
+48 (17) 854 98 14. Your personal data will be processed in order to perform
the contract, in accordance with Article 6(1)(b) of the aforementioned
regulation, to the extent resulting from tax laws and financial regulations.
Recipients of your personal data include entities authorized by legal
regulations to obtain personal data as well as processing entities providing
services to Elmak Sp. z o.o. Your personal data will be stored on the basis of
the Administrator’s legitimate interest. You have the right to access your
data, and the right to rectify, delete or limit processing of your data. You
have the right to lodge a complaint to the supervisory body if you believe
that the processing violates the GDPR. The provision of personal data is
voluntary, however, a failure to provide such data may result in a refusal to
conclude or in termination of a contract. Your personal data will not be
subjected to automated decision-making, including profiling referred to in
Article 22 section 1 and 4 of the GDPR of April 27, 2016.
Information of the utilization of electrical and electronic equipment
This symbol indicates that electrical appliances should not be discarded with
other household waste. Used equipment should be handed over to a local
collection point for this type of waste or to a recycling center. Please
contact your local authorities for information about disposal methods
available in your area. Waste electrical equipment may contain hazardous
substances (e.g. mercury, lead, cadmium, chromium, phthaltes) which can get
into air, soil and groundwater when leaking from used appliances.
Environmental pollution with these substances leads to their bioaccumulation,
causing lesion of disease in living organisms, which would pose a risk to
human and animal health or life. Households may contribute to environmental
protecion by proper waste collection. In such way, hazardous substances from
the equipment are neutralized and valuable secondary raw materials are reused
for production of new equipment.
PRODUCER:
Elmak Sp. z o.o.
ul. Morgowa 81
35-323 Rzeszów
www.savio.net.pl
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>