VIBIA E01 Mayfair Mini LED Instruction Manual

Table of Contents

VIBIA-E01-Mayfair-Mini-LED-product

Caution

Before first turning on the light fitting, the battery should be fully charged using the charger supplied. Only use chargers and cables approved by VIBIA. Unauthorized chargers and cables can cause the battery to explode or cause unrepairable damages.
This lamp is for indoor use only, excluding bathrooms or any type of humid surface.
We recommend reading the manual before installing the lamp. Keep these instructions for future reference.
Do not disassemble, modify, or try to repair this fitting. Contact VIBIA for technical assistance. Any change or modification to the light fitting can nullify the manufacturer’s guarantee.
All electronic products and batteries must be taken to separate waste collection points at the end of their working lives. They must not be disposed of in normal household waste. It is the responsibility of the user to dispose of the equipment using a designated collection point or service for separate recycling of waste electrical and electronic equipment (WEEE) and batteries according to local laws.

Attention

Before assembling and installing this product, carefully read the following considerations:
Before using the lamp, charge the battery using the base and charger provided. Only use chargers and cables approved by VIBIA. Unauthorized chargers and cables can cause the battery to explode or cause irreparable damage.
We recommend reading the manual before starting the installation of the appliance. Save these instructions for future reference.

Step 1: Product Spec Sheet
Net Weight: 0.73 Kg
LED: 1 x 2.5W 5V
IP Rating: IP20 (Product protected against solid objects as big as or bigger than 12 mm. No protection against water.)
Power Supply: Bi-volt, 50/60 Hz
Electrical Safety: Class III. Electrical product with low voltage safety connection. (Klasse III. Apparat mit Schutz gegen elektrischen Stromschlag durch Anwendung der Schutzkleinspannung. Ohne Schutzleiter. Classe III. Apparecchio alimentato a tensione molto bassa di sicurezza.)

Caution
Before assembling and installing this product, carefully read the following:

Before first turning on the light fitting the battery should be fully charged using the charger supplied. Chargers and cables approved by VIBIA should only be used. Unauthorized chargers and cables can cause the battery to explode or unrepairable damages.
This lamp is for indoor use only, excluding bathrooms or any type of humid surface.
We recommend reading the manual before installing the lamp. Keep this instruction for future reference.
Do not disassemble, modify or try to repair this fitting. In order to get technical assistance contact VIBIA. Any change or modification to the light fitting can nullify the manufacturer’s guarantee.
All electronic products and batteries must be taken to separate waste collection points at the end of their working lives, they must not be disposed of in normal household waste.
It is the responsibility of the user to dispose of the equipment using a designated collection point or service for separate recycling of waste electrical and electronic equipment (WEEE) and batteries according to local laws.