VIBIA Mayfair Mini Table Lamp Instruction Manual
- October 30, 2023
- VIBIA
Table of Contents
Assembly instructions
Mayfair Mini
Design by Diego Fortunato
Mayfair Mini Table Lamp
Caution
Before assembling and installing this product, carefully read the
following:
– Before first turning on the light fitting the battery should be fully
charged using the charger supplied. Chargers and cables approved by VIBIA
should only be used. Unauthorised chargers and cables can cause the battery to
explode or un-repairable damages.
– This lamp is for indoor se only, excluding bathrooms or any type of humid
surface.
– We recommend reading the manual before installaing the lamp. Keep this
instructions for future reference.
– Do not disassemble, modify or try to repair this fitting. In order to get
technical assistance contact VIBIA. Any change or modification to the light
fitting can null the manufacturer’s guarantee.
– All electronic products and batteries must be taken to separate waste
collection points at the end of their working lives, they must not be disposed
of in normal household waste. It is the responsability of the user to dispose
of the equipment using a designated collection point or service for separate
recycling of waste electrical and electronic equipment (WEEE) and batteries
according to local laws.
Step 1: Product Spec Sheet
Technical specifications
5497
1 x LED 2,5W 5V
Net Weight
Class III. Electrical product with low voltage safety connection.
Product protected against solid object as big as or bigger than 12 mm. No
protection against water.
Alternating current.
Step 2: Supplied Materials
Supplied material
5497
| 1. Driver | 1 un. |
|---|---|
| 2. Lighting fixture | 1 un. |
Step 3: Product Assembly
Step 4: Adjustments & Maintenance
Maintenance
Use a slightly-wet cotton cloth for cleaning.
In case of malfunction or damage, please contact the retailer who sold the
lamp.
Vibia Lighting, S.L.U.
Spain & Portugal T. +34 934 796 970
International T. +34 934 796 971
[email protected]
www.vibia.com