VIBIA 4200 Fold LED Wall Light Instruction Manual
- October 30, 2023
- VIBIA
Table of Contents
VIBIA 4200 Fold LED Wall Light
Product Information
The product is a lighting fixture designed by Arik Levy with a foldable design. The version of the product is E01 and it comes in four different models with varying net weights and number of LED lights. The product is Class I and has an additional protection cable for grounding. It has a bi-volt system with a voltage range of 100-240V and operates on alternating current. The product is protected against solid objects larger than 12mm and has an IP20 rating, which means it is not protected against water. The product is for indoor use only and should not be installed in bathrooms or humid surfaces. The user manual provides cautionary instructions that must be followed for safe installation and use of the product.
Product Usage Instructions
Switch off the mains before assembling and installing the product to ensure safety. If installing the product on the wall, choose the adequate fixing tools for the wall material. The product is for indoor use only and should not be installed in bathrooms or humid surfaces. It is recommended to read the manual before installing the lamp and keep the instructions for future reference. Do not disassemble, modify, or try to repair the fitting as it can nullify the manufacturer’s guarantee. For technical assistance, contact VIBIA. At the end of the product’s working life, electronic products and batteries must be taken to separate waste collection points and not disposed of in normal household waste. It is the user’s responsibility to dispose of the equipment using a designated collection point or service for separate recycling of waste electrical and electronic equipment (WEEE) and batteries according to local laws.
Caution
Before assembling and installing this product, carefully read the following:
- Switch of the mains before installing the lamp.
- To install on the wall, always choose adequate fixing tools for the wall material.
- This lamp is for indoor use only, excluding bathrooms or any type of humid surface.
- We recommend reading the manual before installing the lamp. Keep this instruction for future reference.
- Do not disassemble, modify or try to repair this fitting. In order to get technical assistance contact VIBIA. Any change or modification to the light fitting can nullify the manufacturer’s guarantee.
- All electronic products and batteries must be taken to separate waste collection points at the end of their working lives, they must not be disposed of in normal household waste. It is the responsibility of the user to dispose of the equipment using a designated collection point or service for separate recycling of waste electrical and electronic equipment (WEEE) and batteries according to local laws.
Product Spec Sheet
Technical specifications
-
* **Class I.** Product with an additional protection cable (grounds). -
- Product protected against solid object as big as or bigger than 12 mm. No protection against water.
-
- Voltage range: 100-240V
-
- Alternating current.
Supplied Materials
Lighting fixture 
Installation Preparation
Maintenance
- Use a slightly-wet cotton cloth for cleaning.
- In case of malfunction or damage, please contact the retailer who sold the lamp.
Vibia Lighting, S.L.U.
Spain & Portugal
T. +34 934 796 970
International T. +34 934 796 971
customer.service@vibia.com
www.vibia.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>