THE HOME DEPOT 8WZ4D3QVTA2 Floating Shelves for Wall Set Instruction Manual

Floating Shelf Instruction Manual

8WZ4D3QVTA2
V2.0

IMPORTANT SAFTY INFORMATION

• Check package contents against supplied parts and hardware list to assure that all components were received undamaged. Do not use damaged or defective parts. If you require replacement parts, please contact us customer service at anyjoelaltandrek@gmail.com.
• Carefully read all instructions before attempting installation. If you do not understand the instructions or have any concemns or questions, please contact customer service at anyjoelaltandrek@gmail.com.
• Mot all parts and hardware included will be used.
• Using with caution because this product may contain moving parts.
• Do not use this product for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate use. Thank you for your  understanding.

Tools Needed (Not Included)

Supplied Parts and Hardware List

NOTE:

• This shelving system is for designed for use in wood stud, dry wall, solid concrete, and concrete block walls.
• For drywsll mounting, please use wall anchors [CL
• For wood stud mounting, wall anchors [C] and [D] are not necessary.
• For concrete concrete or concrete blocks wall mounting, please use wall anchors (=]}

Step 1 Secure the Tower Rack [02] to the Shelf on the Mental Frame [01]

Step 2 Secure Metal Frame with Shelf to Wall
Before installation, please identify your wall type.
For wood stud installation, follow the step 2A.
For drywall installation, follow the step 2B.
For solid concrete and concrete block walls installation, follow the step 2C

Step 2A For Wood Stud Use a stud finder{not included) to loacte wood studs. Mark the edge and center locations. Pasition the metal frame with shelf at your desired height and line up the holes with your stud center line. Level the shelf and mark the holes. Install the metal frame with shelf using long lag screw [A]. Tighten long lag screws [A] with the screwdriver (not included). If you feel it is dithcult to install the long lag screws [A] to wall, you can simply use a 2mm(5,/64 in.) drill bit to drill 2 pilot holes for the  long lag screw [A]. Tighten the long lag screw [A] only until the long lag serew [A] are pullied firmly against the metal frame.

Step 2B For Drywall

Position the metal frame with shelf [01] at your desired height and make sure the metal frame with shelf [01] is level and flush to the drywall. Mark the holes for the wall anchors [C] Press and screw wall anchors [C]into the drywall using a screwdriver and turn clockwise. Make sure that wall anchors [C] are flush with the wall. Install the metal frame with shelf [01] using short lag screws [B] and wall anchors [C], tighten short lag screws [B] until they are pulled firmly against the metal fame.

Step 2C For Solid Concrete and Concrete Block Walls Position the metal frame with shelf [01] at your desired height and make sure the metal frame with shelf [01] is level and flush to the solid concrete and concreté block walls.
Mark the holes for the wall anchors [D].

Drill 2 pilot holes using a 15/64 in.(6mm) diameter drill bit. Make sure the depth is not less than 1.4 in.(35mm). Never drill into the mortar between blocks. Use the hammer to knock wall anchors [D] into the wall. Be sure the anchors [D] are seated flush with the concrete surface. Install the metal frame with shelf [01] using short lag screws [B] and wall anchors [D], tighten short lag screws [B] until they are pulled firmly against the metal fame.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>