VAXCEL H0268 Wade 5 Light Matte Black and Sycamore Rustic Cage Chandelier Instruction Manual

VAXCEL H0268 Wade 5 Light Matte Black and Sycamore Rustic Cage Chandelier

Product Information

The product is a light fixture with the model number H0268. It comes with an installation manual that provides detailed instructions on how to assemble and install the fixture. The fixture requires electrical wiring and should be installed according to local electrical codes for wiring and grounding requirements. The product includes a hardware package that consists of the following components:

• Mounting Strap Unit (A)
• Mounting Screw (B)
• Wire Connector (C)
• Finial (D)
• Quick Link (E)

ASSEMBLY AND INSTALLATION INSTRUCTIONS

WARNING: POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE.TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF

NOTES :

1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. READ AND SAVE THIS INSTRUCTION.

Hardware Package (included)

Installation Steps

Turn off the power at fuse or circuit box.

1. Attach the mounting strap unit (A) to the outlet box using two mounting screws (B).
2. Rod Connections:
3. Thread the fixture wire from the fixture through the lower rod, and then secure the lower rod onto fixture using the threaded pipe.
4. Thread the fixture wire through the middle rod, and then secure the middle rod onto the lower rod using the threaded pipe. Thread the fixture wire through the upper rod, and then secure the upper rod onto the middle rod using the threaded pipe.
5. Thread the fixture wire through the loop and fixture canopy, and then secure the loop onto the upper rod using the threaded pipe.
6. Note: Length adjustable from 10-3/4″ to 73-1/4″. Use fewer rods if shorter length is desired.
7. Take a quick link (E), open the locking tube, and then hook it onto the loop of fixture canopy and the loop of upper rod. Close bak the looking tube of the quick link (E).
8. Attach the cord clamp onto the mounting strap unit (A).
9. Pull out the source wires from the outlet box. Make wire connections using wire connectors (C) as follows:
10. Connect the smooth-coated wire (marked) from the fixture to the black wire from the power source.
11. Connect the ribbed-coated wire (unmarked) from the fixture to the white wire from the power source.
12. Attach the fixture ground wire to the mounting strap unit (A) with the green ground screw, then connect it to the house ground wire with a wire connector (C).
13. Carefully put the wires back into the outlet box.
14. Attach the canopy to the mounting strap unit (A) and secure it with a finial (D).
15. Install 5 x 60W max.medium base bulbs (not included). See relamping label at socket area or packaging for maximum wattage allowed.

Turn on the power at fuse or circuit box.

The following parts are available for re-order if damaged or missing.

Product Usage Instructions

To ensure safety and proper installation of the fixture, follow these steps:

1. 1. Before starting the installation, turn off the power at the fuse or circuit box.

2. Attach the mounting strap unit (A) to the outlet box using two mounting screws (B).

3. 1. Connect the fixture ground wire to the house ground wire using a wire connector (C).
4. 1. Take a quick link (E), open the locking tube, and hook it onto the loop of the fixture canopy and the loop of the upper rod. Close back the locking tube of the quick link (E).
5. 1. Attach the cord clamp onto the mounting strap unit (A).
6. 1. Attach the canopy to the mounting strap unit (A) and secure it with a finial (D).

7. Install 5 x 60W max. medium base bulbs (not included) according to the relamping label at the socket area or packaging. Make sure not to exceed the maximum wattage allowed.

8. Turn on the power at the fuse or circuit box.

The spare parts list is available for re-order in case any components are damaged or missing . The list includes the following parts:

• Mounting Strap Unit (A)
• Mounting Screw (B)
• Wire Connector (C)
• Finial (D)
• Loop Lock (E)
• Mounting Hardware 6472MM (1 SET)
• 12 Rod 3318RD
• 6 Rod 3319RD
• 3 Rod 3320RD

Spare Parts List

Product dimensions:

• A: 10-3/4~73-1/4
• B: 36-3/4
• C: 12-3/4

Please refer to the provided images for better understanding of the installation steps.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>