YENKEE YSP 3010BK Bluetooth Speaker User Manual

YSP 3010BK

USERS MANUAL

YSP 3010BK Bluetooth Speaker

Package contents

BT speaker
AUX-IN cannection cable
USB-C cable for charging
User’s manual

BT speaker description

A Front side B Right side

1. LED indicator
2. On/Off button
3. “-” / Play previous button
4. Play/Pause button
5. “+” / Play next button
6. “mM” multifunction button
7. LED charging indicator
8. Memory card slot
9. Charging connector “USB-C”
10. AUX-IN connector “jack 3.5mm”

Putting into operation

Before first use, be sure to read the safety instructions contained in this user’s manual carefully.
We recommend that the BT speaker is fully charged before initial starting. To charge your device, use your power adapter and the USB cable supplied with the BT speaker. Charging is done by connecting the USB cable to your adapter and the BT speaker connector (No. 9 in the picture “BT speaker description”}. Press and hald the power button (No. 2) to turn on the BT speaker, press and hold the BT speaker button again to turn off the BT speaker.
Notice: The BT speaker is equipped with an automatic shut-off function if no signal source is connected to it.

LED indicator

The LEO indicator shows the following states of the BT speaker:
LED indicator No. 1:
a. Fast intermittent blue – Device is ready for Bluetooth pairing, audio signal source is not connected
b. Slow intermittent blue – Device plays music
c. Solid blue – the BT speaker is paired with another device via Bluetooth
d. Fast intermittent white – TWS mode looking for a second device
e. Solid white – paired in TWS made
LED indicator No. 7:
Salid red – the BT speaker’s battery is being charged

Pairing devices via Bluetooth

Turn on the BT speaker and search for its Bluetooth name “QBRICK“ on the device you want to pair and start the pairing process. If you are requested to enter a pairing code while your device and the BT speaker are pairing, use the code: “OOOO”.
Note: To ensure a stable Bluetooth connection, keep a dis- tance of up to 10 metres between the BT speaker and the connected device.
Caution: Some connected devices support common volume setting. If some of the connected devices do not support this feature, the volume setting will operate separately on each device.

TWS function

If you purchase an additional Bluetooth speaker (“QBRICK’), you can pair them together for optimal stereo sound. First, make sure your device is not connected to any BT speaker. Switch on both BT speakers and press and hold the M button (No. 6) on one of them. Wait until the speakers automatically pair together (accompanied by an acoustic signal). The white LED indicator will stop flashing on the right audio channel, then connect your mobile device to the BT speaker. When the BT speakers and mobile device are successfully paired, the blue LED indicator on both devices will light up. To cancel the pairing between BT speakers, hold down the M button (No. 6)
Changing the volume level using the volume control buttons will take effect automatically on both paired BT speakers.
Note: If the BT speakers fail to be paired successfully to transfer stereo sound, turn all engaged units off and then on again.
Notice: Functions such as USB playback, memory card playback or AUX IN are not available in TWS mode.

Play/Pause button

1. Press the Play/Pause button (Na. 4 in the picture “BT speaker description”) ta start or pausc music playback during the Bluetooth connection.
2. If the BT speaker is connected to your phone via Blue- tooth, press the Play/Pause button twice briefly to dial the last called number. Long pressing the button will also reject an incoming call.
3. The incoming call to a Bluetooth-connected paired device will be accompanied by an acoustic signal which will interrupt the music being played back. To answer/hang up an incoming call, press the Play/Pause button briefly.
   Notice: Control of smart devices using the BT speaker buttons may vary depending on the connected device

Skipping to next/previous track

You can skip to the next track by pressing and holding the “+” button (Na. 5]. Long press of the “-” button (No. 3) will skip playback to the previous track.

Volume control

To increase the volume, press the “+” button (No. 5}. Press the “-” button (No. 3) to reduce the playback volume level.

Signal source button

A short press of the button (No. 6} will change the playback source (Bluetooth mode, memory card, AUX-IN).

Memory card/USB source

Insert the memory card into the slot with the contacts to- wards the USB-C slot (downwards). If there is no file ta play an the memory card, the BT speaker will switch to another playback mode (e.g. Bluetooth connection). To release the TF memory card, press it gently into the BT speaker with
your fingernail or a blunt instrument and the card will release. Then you can carefully remove it with your fingernails (or with tweezers).
Notice: Due to a number of devices on the market, compatibility and playback support are not guaranteed for all media. The memory devices you want to cannect should be tested in advance and/or formatted as FAT32.

Audio AUX IN

The BT speaker is equipped with a 3.5mm jack. Your device can be connected to the BT speaker via the supplied audio cable. First, connect the audio plug to your device and then to the BT speaker’s jack.
Notice: Before connecting your device to the BT speaker, ensure that the output signal from your device is at its maximum level (minimum output volume). This will prevent the BT speaker from damage. When the audio cable is connected, the BT speaker does not meet the water regression, protection class.
Note: In this mode, not all functions of the BT speaker are available. The Bluetooth function is not active if the audio jack is connected to the BT speaker.

Charging

A charged battery provides power for several hours of ope-ration at normal volume levels. A high volume consumes more battery power; therefore, we recommend listening at normal volume levels. To charge he BT speaker, connect the charging adapter to a power socket and then to the BT speaker. The BT speaker will indicate low battery by acoustic signal. Caution: For charging, use only the original accessories supplied with the appliance. To achieve the maximum battery lifetime, it is best to start charging the battery after the low battery power notification. Charge continuously until fully charged. When the battery opera- ting time becomes very short, the battery lifetime has been used up; we recommend that you have the battery replaced at your authorized centre.
Recommendation: If the unit is not to be used for an ex- tended period of time, we recommend to fully charge the battery once every two to three months. We do not recommend storing the unit with a flat battery to prevent irreparable damage to the battery (loss of capacity).

IPX7 water resistance

The unit is resistant against water thus allowing you to listen to your music in bath, shower, on the beach, or by the pool. IPX7 water resistance guarantees the unit’s function with slight splashing or immersing in water 1m deep for up to 30 minutes. Full immersion is not recommended due to possible signal loss for playback sound transmission.
Notice: Always remember to seal the BT speaker inputs (No. 8-10 in the picture “BT speaker description’) with the original gasket and make sure the gasket is not damaged. Never charge the device during possible contact with liquids. The device is only intended for contact with clean water without any impurities. Avoid exposing the unit to contaminated or industrially treated fluids (such as lemonade, sea/salt water, oils, etc.)..

Specification:

Bluetooth Version: 5.0
Bluetooth profile: ACDP V1.3, ACRCP V1.4, HFP V1.6
Transmission distance: up ta 15m
Output power: 20W (RMS}
Driver Unit: p 45mm
Frequency response: 60Hz-18kHz
Signal-to-noise ratio: 280dB
Maximum transmitter power: 8OmW at 2.4 GHz – 2.4835 GHz
Battery type: Lithium-ion 2400mAh
Power input: OC 5V/1A (TYPE C}
AUX: 3.5mm jack
Playtime: 8-10h
Dimensions: 190x50x65mm
Weight: 455g

Instructions and information regarding the disposal of used packaging materials
Dispose of packaging material at a public waste disposal site.
Disposal of used electrical and electronic appliances The meaning of the symbol on the product, its accessory or packaging indicates that this product shall not be treated as household waste. Please, dispose of this product at your GME applicable collection point for the recycling of electrical & electronic equipment waste. Alternatively in some states of the European Union or other European states, you may return your products to your local retailer when buying an equivalent new product.
The correct disposal of this product will help save valuable natural resources and help in preventing the potential negative impact on the environment and human health, which could be caused as a result of improper liquidation of waste. Please ask your local authorities or the nearest waste collection centre for further details. The improper disposal of this type of waste may fall subject to national regulations for fines.
For business entities in the European Union If you wish to dispose of an electrical or electronic device, request the necessary information from your seller or supplier.
Disposal in other countries outside the European Union If you wish to dispose of this product request the necessary information about the correct disposal method from local government departments or from your seller.
This appliance complies with EU rules and regulations regarding electromagnetic and electrical safety. Changes to the text, design and technical specifications may occur without prior notice and we reserve the right to make these changes.
Hereby, FAST CR, a.s. declares that the radio equipment type [YSP 3010BK] is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address: www.yenkee.eu

Manufacturer:
FAST CR, a.s., U Sanitasu 1621, 251 01 Ricany, Czech Republic
Copyright © 2022, Fast CR, a.s.
Revision 1/2022

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>