Klipsch R-5502-W II In-Wall Speaker OWNER’S MANUAL

Klipsch R-5502-W II In-Wall Speaker

IMPORTANT SAFETY INSTRUCTIONS

1. READ these instructions.
2. KEEP these instructions.
3. HEED all warnings.
4. FOLLOW all instructions.
5. DO NOT use this apparatus near water.
6. CLEAN ONLY with a dry cloth.
7. DO NOT block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8. Do NOT install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. DO NOT defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wider blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for the replacement of the obsolete outlet.
10. PROTECT the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11. ONLY USE attachments/accessories specified by the manufacturer.
12. USE only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13. UNPLUG this apparatus during lightning storms or when unused for long periods of time.
14. REFER all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

• This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit.
• This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit.
• WARNING: To reduce the risk of fire or electrical shock, do not expose this apparatus to rain or moisture.
• WARNING: Voltages in this equipment are hazardous to life. No user-serviceable parts inside. Refer all servicing to qualified service personnel.
• CAUTION: Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate this device.

ABOUT YOUR KLIPSCH PURCHASE

Your new Klipsch architectural speakers have been designed to deliver great sound while remaining unobtrusive wherever you install them. For optimum performance, please use the models ending with a “W” for in-wall installations. Models ending in “C” should be used for in-ceiling applications. Either type is suitable for use as front, center, or surround channels in audio or home theater applications, or as part of a distributed sound system.

Minimum Tools Required #2 Phillips Screwdriver Wire strippers Level Stud finder Saw

IN-WALL SPEAKER PLACEMENT

Designed to function in any standard wall, ceiling, or drop ceiling, Klipsch in-wall speakers are engineered for years of performance. Minimum construction requirements call for drywall or other mounting surfaces to be at least 3/8″ thick (figure1).

To maximize performance, speakers should be placed at an equal distance from the listener and along a common wall
to ensure the best stereo effect. For background listening environments (or when the listening position may vary widely), speaker placement may be wherever is most convenient, although in these cases stereo imaging may be lost.

IN-CEILING SPEAKER PLACEMENT

Designed to function in any drywall or drop ceiling, Klipsch in-ceiling speakers are engineered for years of performance. Minimum construction requirements call for drywall or other mounting surfaces to be at least 3/8″ thick. In drop ceiling installations, typical “drop in” 2’ x 4’ and 2’ x 2’ ceiling tiles are composed of low-density materials which have the potential over time to sag and vibrate audibly. To maximize the acoustic performance of your in-ceiling speakers, Klipsch recommends you replace the original mounting panel with 1/2″ to 3/4″ plywood or medium-density fiberboard (MDF) (figure 2).

SPEAKER INSTALLATION

(for New Construction, skip to step #3)

1. Cut the appropriate size opening in the wall or ceiling using the template provided. If the template is not available, cutout dimensions are provided on the Klipsch website,
   www.klipsch.com. The sizes listed are minimum. If the accuracy of the cut cannot be achieved, you may add 1/4″ to each dimension. Be careful not to cut through any existing wiring or plumbing. Avoid compromising any fire stops between studs.

2. Run speaker wiring (18 gauge minimum) to the openings. Be sure to comply with all building codes in your area.

3. Attach the wire to the speaker using the wire’s color coding or markings as a guide to maintain proper polarity.

4. Insert the speaker assembly into the opening and attach it by tightening the four Phillips screws (figure 3). The frame’s
   “dog” legs will swivel out and “sandwich” the wall and frame together. (Klipsch’s new construction brackets make this simple if used prior to drywall installation.)

5. At this point, you may paint the speaker grilles before inserting them into the speakers. Klipsch grilles are designed to accept most types of paint. You may wish to remove the scrim material before painting. It may be reinserted after the paint is dry. Care should be taken to avoid excessive paint build-up in the grille perforations.

6. Press the grille into place.

See the back page for more illustrations.

OPERATING CONTROLS

• Mid-Bass and Tweeter Attenuator Switch (3000 and 5000 Series)
  Some models feature a Tweeter switch (3000 series) or both a Mid-Bass and a Tweeter switch (5000 series) located on the front baffle. The switch allows a setting of either 0dB (normal) or –3dB in the respective frequency range. If installing in an acoustically bright room, such as a bathroom or kitchen, you may want to adjust the Tweeter level switch. If the speaker is located in a corner and produces too much bass, you may need to adjust the Mid-Bass level switch. The position of the switch should always be checked prior to attaching the grille.

• Pivoting Horn (In-Wall Models)
  The 3000 and 5000 series feature a pivoting horn that allows the horn to be toed in. Before the grille is installed, carefully aim the horn toward the listening area.

• Swiveling Horn Tweeter (In-Ceiling Models)
  Klipsch Reference in-ceiling models (3000 and 5000 Series) feature a swiveling tweeter to aim the high frequencies. To aim sound directly at the listening area, gently adjust the horn to the desired angle before the grille is installed.
  Do not attempt to turn the tweeter stem while adjusting the swivel tweeter.

• Infrared Sensor Mount (In-Wall Models)
  The 2000, 3000, and 5000 Series in-wall speakers feature a 1/2’’ infrared sensor locator on the baffle.

WARRANTY–U.S. AND CANADA ONLY

Klipsch warrants to the original retail purchaser that this product is to be free from defective materials and workmanship for the life of the product if it is properly used and maintained. If this product proves defective in either material or workmanship, Klipsch, at its option, will (a) repair the product, or (b) replace the

product, at no charge for parts or labor. If the product model is no longer available and cannot be repaired effectively or replaced with an identical model, Klipsch at its sole option may replace the unit with a current model of equal or greater value. In some cases, modification to the mounting surface may be required where a new model is substituted. Klipsch assumes no responsibility or liability for such modification. To obtain a repair or replacement under the terms of this warranty, please contact our customer service group at 1-800-KLIPSCH. You will be required to submit a copy of the original receipt via fax or email. The receipt must reflect that you are the original purchaser, the product was bought from an authorized Klipsch retailer, and the product is still within warranty. You will be issued a return authorization number (RA#) and asked to ship the defective product, together with proof of purchase and RA#, prepaid insured to the address set forth Klipsch 137 Hempstead #278 Hope, AR 71801. Freight collection shipments will be refused. The risk of loss or damage in transit is to be borne by the purchaser. Once Klipsch receives the defective product, a repair or replace- ment order will be initiated.

Limitations:

• This limited warranty does not cover failure of the product resulting from improper installation, misuse, abuse, accident, neglect, mishandling, or wear from ordinary use or environmental deterioration.
• This limited warranty does not cover cosmetic damage, including paint damage, or consequential damage to other components or premises which may result for any reason from the failure of the product.
• This limited warranty is null and void for products not used in accordance with Klipsch’s instructions.
• This limited warranty is null and void for products with altered or missing serial numbers and for products not purchased from an authorized dealer.
• This limited warranty terminates if you sell or otherwise transfer this product to another party.

THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE, JURISDICTION TO JURISDICTION, OR COUNTRY TO COUNTRY. KLIPSCH’S RESPONSIBILITY FOR MALFUNCTIONS AND DEFECTS IN HARDWARE IS LIMITED TO REPLACEMENT OR REPAIR AS SET FORTH IN THIS WARRANTY STATEMENT. FOR CANADIAN CUSTOMERS, KLIPSCH DISCLAIMS ALL OTHER WARRANTIES AND CONDITIONS, EXPRESS OR IMPLIED, STATUTORY OR OTHERWISE, FOR THE PRODUCT. FOR U.S. CUSTOMERS, ALL EXPRESS AND IMPLIED WARRANTIES FOR THE PRODUCT, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED IN TIME TO THE TERM OF THIS WARRANTY. SOME STATES, JURISDICTIONS, OR COUNTRIES DO NOT ALLOW THE EXCLUSION OF CERTAIN IMPLIED WARRANTIES OR CONDI-TIONS, OR LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY OR CONDITIONS LASTS, SO THIS LIMITATION MAY NOT APPLY TO YOU. KLIPSCH DOES NOT ACCEPT LIABILITY FOR SPECIAL, INDIRECT, CONSEQUENTIAL, OR INCIDENTAL DAMAGES, INCLUDING WITHOUT LIMITATION, ANY LIABILITY FOR THIRD-PARTY CLAIMS AGAINST YOU FOR DAMAGES OR FOR PRODUCTS NOT BEING AVAILABLE FOR USE. THE MAXIMUM LIABILITY FOR WHICH KLIPSCH MAY BE RESPONSIBLE WILL BE NO MORE THAN THE AMOUNT YOU PAID FOR THE PRODUCT THAT IS THE SUBJECT OF THE CLAIM. SOME STATES, JURISDICTIONS, OR COUNTRIES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.

WARRANTY OUTSIDE THE UNITED STATES & CANADA

The Warranty on this product if it is sold to a consumer outside of the United States or Canada shall comply with applicable law and shall be the sole responsibility of the distributor that supplied this product. To obtain any applicable warranty service, please contact the dealer from which you purchased this product or the distributor that supplied this product.

3502 Woodview Trace, Suite 200 Indianapolis, Indiana 46268 1.800.KLIPSCH

www.klipsch.com

MOUNTING

 FREQUENTLY ASKED QUESTION

What is the Klipsch R-5502-W II In-Wall Speaker?

The Klipsch R-5502-W II is an in-wall speaker designed for home theater and audio installations.

What is the power handling of the R-5502-W II?

The R-5502-W II has a power handling capacity of 200 watts continuous and 800 watts peak.

What type of speaker is it?

The Klipsch R-5502-W II is a 2-way in-wall speaker.

What is the frequency response of the R-5502-W II?

The frequency response of the R-5502-W II is 46Hz - 20kHz.

Does it have a built-in amplifier?

No, the R-5502-W II does not have a built-in amplifier. It requires an external amplifier or receiver to power it.

What is the sensitivity rating of the speaker?

The sensitivity rating of the R-5502-W II is 92dB.

Does it come as a single speaker or a pair?

The R-5502-W II is sold individually, so you would need to purchase multiple units for a stereo or surround sound setup.

Can it be installed in a wall or ceiling?

Yes, the R-5502-W II is designed to be installed in a wall. It can also be installed in a ceiling if desired.

What kind of driver configuration does it have?

The R-5502-W II features two 5.25-inch Cerametallic woofers and a 1-inch titanium diaphragm compression driver mated to a 90x60-degree Tractrix Horn.

Does it come with a grille?

Yes, the R-5502-W II includes a paintable grille that can be easily attached or removed.

What is the recommended amplifier power for this speaker?

Klipsch recommends using an amplifier with a power output of 100-400 watts with the R-5502-W II.

Can it be used for both music and movies?

Yes, the R-5502-W II is designed to deliver high-quality sound for both music and movies.

What is the nominal impedance of the speaker?

The nominal impedance of the R-5502-W II is 8 ohms.

Can it be used in a Dolby Atmos setup?

Yes, the R-5502-W II can be used in a Dolby Atmos setup as an overhead or height channel speaker.

DOWNLOAD THE PDF LINK:Klipsch R-5502-W II In-Wall Speaker OWNER’S MANUAL

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>