LEDWOOD 602509 Titan BT Stereo Earphones User Guide

LEDWOOD 602509 Titan BT Stereo Earphones

Product Information

The Titan BT Stereo Earphones are wireless earphones that come with a charging case, USB C cable, ear tips, and a user manual. They have a status indicator light to provide information on
pairing, connectivity, power status, and charging. The earphones can be paired with a Bluetooth device for wireless audioplayback.

Product Usage Instructions

1. Charging the Earbuds:
   • Put the earbuds into the charging case.
   • Connect the included USB-C cable to the USB charging port of the case.
   • Connect the other end of the cable to a USB powered source to charge the case.
   • The indicator light will gradually become bright or dim to indicate the charging progress.
   • The power indicator light colors are as follows:
   • – 5-35%: Red light
   • – 35-70%: Yellow light
   • – 70-100%: Green light
   • When the earphones are fully charged, the green light will turn off after 8 seconds.
   • When the battery level is at 5%, the red light will flash quickly for 4 seconds and then turn off.
2. Powering Off:
   • Put the earbuds back into the charging case.
   • When not connected to any device, the earphones will automatically power off after 3 minutes.
3. Pairing & Connectivity:
   • Turn on the Bluetooth of your Bluetooth device.
   • Take the earbuds out of the charging case.
   • The earbuds will enter pairing mode and can be connected to your Bluetooth device.
4. Non-Automatically Earbuds Pairing:
   • If auto-pairing fails or the dual earphones get disconnected, press the power button on both the left and right earphones to turn them off.
   • Turn on the earbuds again to manually connect the left and right earphones.
5. Resume Factory Setting:
   • Delete the previously connected Bluetooth name from your phone.
   • Touch the left and right earphones five times respectively.
   • The earbuds will turn on, enter pairing mode, and flash blue light.
   • Reconnect the Bluetooth with your phone.

Note: Please refer to the user manual for proper usage. The product properties and functions may change without prior notice. Avoid using the earphones in extreme temperature, dusty, or humid places. Do not disassemble the audio combination, as it may void the warranty. If not used for long periods, store the earphones and charger case in a dry place and recharge them at least every 2 months.

TECHNICAL SPECIFICATIONS

• Bluetooth ……………………………………………………………………………..V5.1
• Bluetooth max power ………………………………………………………….8dBm
• IPX …………………………………………………………………………………………..4
• Frequency response ………………………………………………….20Hz-20 kHz
• Impedance …………………………………………………………………………..32Ω
• Input Rating ……………………………………………………………………..5V – 1A
• Bluetooth range …………………………………………………………………….10M
• Power …………………………………………………………………………….2X5mW
• Total autonomy …………………………………………………………………..14:00
• Earphones autonomy …………………………………………………………….4:00
• Battery capacity ……………………………………………2X30mAh + 300mAh

FEATURES

BOX CONTENT

wireless earphones, charging case, USB C cable, ear tips, user manual.

PAIRING & CONNECTIVITY

1. Turn on the Bluetooth of your Bluetooth device.
2. Take the earbuds out of the charging case and they will enter pairing mode automatically.
3. Choose «TITAN» from the list of found Bluetooth devices on your Bluetooth device to pair.

Notes :

• Make sure the earbuds and your Bluetooth device are next to each other within 33 feet or 10 meters and there are no obstacles between.
• If pairing failed, put the earbuds back into the charging case make sure that they have been turned off. Then pair the earbuds with your Bluetooth device again.
• When the earbuds are on but not paired with a Bluetooth device, they will be automatically off after 3 minutes.
• The earbuds will connect to the last paired Bluetooth device automatically when they are turned on. Please turn on the Bluetooth of your Bluetooth device before turning on the earbuds.

PRIMARY/SECONDARY MODE

These earbuds have primary-secondary switch function.

• When the earbuds have been connected to a Bluetooth device, take out either of the two earbuds, it can be connected and used normally. During this period, you can take out the other one and they will pair with each other so you can use both of the earbuds.
• When both earbuds are connected to your phone, no matter which one is put back to the charging case, you can use the other one without interruption.

LOADIND
Charge the earbuds
Put the earbuds into the charging case

Charging the charging case
There is a USB-C cable included in the packaging. Connect it to the USB charging port and the other end into a USB powered source to charge your case.
When charging,the indicator light will gradually become bright or dim.
Power indicator:

• 5-35% Red light
• 35 -70% Yellow light
• 70-100% Green light

When the earphones are charged, the green light will turn off after 8 seconds. While 5% battery, the red light will flash quickly for 4 seconds and then light off.

POWER OFF
Put the earbuds back into the charging case.
When not connected to any device, the earphones will power off automatically after 3 minutes.

DYSFUNCTION

Non-automatically earbuds pairing
When auto-pairing failed, or dual earphone disconnected. Press the power button on left and right earphone, to make the earbuds off and on again, the left and right earphone will be connected manually.

RESUME FACTORY SETTING

1. Delete the bluetooth name which you got connected before from your phone.
2. Touch the left and right earphones for 5 times respectively. You will see red and blue light flash for 2 seconds at the same time. The earbuds will turn on. At the meantime, the earbuds are waiting for pairing. Within 10 minutes, it will finish connecting and the earbuds will flash blue light.
3. Reconnect the bluetooth with your phone.

CAUTIONS
“Please refer to this Users’ Manual before use to use it properly.
The contents stated herein may be modified from time to time for better service as the product properties and functions are changed without prior notice.”
“For the sound performances of the product, never use it in too cold, too hot, too dusty or humid places, especially:”

1. Near the heater or hi-temperature services or solarization
2. Never disassemble the combination audio; otherwise, it may invalidate the warranty.”
   “When the earphones and the charger case are not used for long periods of time, it is recommended to keep them in a dry place and to recharge them at least every 2 months”

WARNING
«Prolonged use of earphones at high volume may cause irreparable hearing loss. We strongly advise you to adjust your Iistening volume to a reasonable level. The higher the volume, the more you risk damaging your hearing quickly.»
«We also recommend you to use your earphones responsibly!
It is dangerour or even illegal in some areas, to use earphones in situa-tions that require your full attention, such as driving a car , motorcycle or bicycle,but also as a pedestrian when crossing the street.etc.»
«If you wish to return a LEDWOOD product, please contact the retailer where you purchased it.
Our products are guaranteed for two years by the European legal conformity guarantee.»
«Ledwood products are designed and produced to provide the best possible customer experience in terms of quality and assiciated tech-nologies. That is why the vast majority of our products meet the de-mand and are beyond reproach.
However, some products exhibit design flaws related to the production line, so it is our duty to inform the public about the two-year war-ranty available to everyone on our entire product line.»
«If you encounter a problem with one of our products and would like to make use of this warranty, please contact your store salesperson. In a concern of ecology and anti-waste policy, be careful not to treat the product concerned as a consumable, a second life can be offered to it !»

EC DECLARATION OF CONFORMITY

Hereby, we
PRIMETIME – Parc d’activité des Moulins de la Lys
Rue Fleur de Lin, Cellule 7 – 59116 HOUPLINES – FRANCE

Declare that below product(s)

• Product …………………………………………….TRUE WIRELESS EARPHONE
• Model number ………………………………………………………………….LD-S20
• Factory model number ………………………………………………….SUGAR 20
• Commercial brand ………………………………………………………..LEDWOOD
• Commercial Model name …………………………………………………….TITAN

Complies (comply) to the essential provisions of the EC directive(s)

• Low Voltage directive …………………………………………………2014/35/EU
• RED directive …………………………………………………………….2014/53/EU
• EMC directive ……………………………………………………………2014/30/EU
• ROHS directive ……………………………………2011/65/EU, (EU) 2015/863

The essential provisions of the following harmonized standards :

• EMC directive ……………………………………….EN 55032:2015/A11:2020
• ……………………………………………………………EN 55035:2017/A11:2020
• ……………………………………………………………….EN IEC 61000-3-2:2019
• ………………………………………………………EN 61000-3-3: 2013+A1:2019
• RED directive …………………………….ETSI EN 300 328 v2.2.2 (2019-07)
• …………………………………………….ETSI EN 301 489-1 v 2.2.3 (2019-11)
• …………………………………………..ETSI EN 301 489-17 v 3.2.4 (2020-09)
• …………………………………………………………………………..EN 50663:2017
• Low Voltage directive. ………………….EN IEC 62368-1:2014+A11:2017
• ………………………………………………………………………..EN50332-2: 2013
• ROHS …………….RoHS Directive 2011/65/EU and its amendment (EU) 2015/863. EN63000:2018

Date……………..09 05 2022
Nom…………………WALLYN
Titre…………………GERANT

LEDWOOD is a trademark owned by Primetime – Copyright 2022
All rights reserved Primetime 2022

Download the instructions in .pdf format You have trouble pairing the headphones, contact us via the mail below: sav@primetime- distribution.com

References

• distribution.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>