hager KEM34S5xZ0LMF Central Cable Feeder Instruction Manual
- June 12, 2024
- hager
Table of Contents
hager KEM34S5xZ0LMF Central Cable Feeder
Product Information
Product Model: KEM34S5xZ0LMF, KEM34S57R0LMF
Safety Standards: IEC / EN 61439-1, IEC / EN 61439-6
Safety Information
Electrical devices should only be installed and assembled by a qualified
electrician in accordance with the relevant installation standards,
guidelines, regulations, directives, safety, and accident prevention
regulations of the country. Failure to comply with these installation
instructions may result in device damage, fire, or other hazards.
Important Note
These instructions are an integral component of the product and must be
retained by the end user.
Danger
The electric shock when live parts are touched! An electric shock can lead to
death! Make sure to disconnect the power supply and cover any live parts in
the area.
Product Usage Instructions
- Ensure that the power supply is disconnected before proceeding with any installation or assembly.
- Refer to the relevant installation standards, guidelines, regulations, directives, safety, and accident prevention regulations of your country.
- Follow the assembly instructions provided in this manual carefully.
- Tighten the screws using a SW10 wrench with a torque of 8 Nm as specified in the manual.
- Continue with the installation process by following the step-by-step instructions and diagrams provided in this manual.
- For any further assistance or inquiries, contact Hager Electro GmbH & Co. KG at T +49 6842 945 0 or email info@hager.com.
WHAT’S IN THE BOX
REQUIRED TOOLS
INSTALLATION
HOW TO FIX SCREWS
HOW TO FIX WIRING
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>