Rasonic RIC-SNG211, RIC-SNG228 Induction Cooker Instruction Manual
- June 12, 2024
- Rasonic
Table of Contents
RIC-SNG211 / RIC-SNG228
Kitchen Use Double-Burner Induction Cooker
For household use only
Installation Instruction
- Please read the installation instruction carefully before using and well keep it in a safe place for future reference.
- Some figures in this instruction may not match with the real object, just for reference only.
Thank you for purchasing Rasonic Kitchen Use Double-Burner Induction Cooker. Read the installation instruction carefully before installation and well keep it for your future reference.
Safety Precautions
-
Accessories
a. A copy of operation manual and installation instruction
b. A copy of product warranty registration
c. A bundle of foam adhesive tape -
Do not disassemble the top plate during installation.
-
Do not install the appliance over a dishwasher, washing machine, dryer, electric oven or refrigerator.
-
Make sure to have a trail test and give an appropriate demonstration to end user before installing the appliance. For built-in installation, leaving at least 100 mm space at the sides, front and back from the wall. Also, at least 150 mm height and 80 cm 2 should be reserved for air inlet/exhaust space. For free-standing installation, leaving at least 100 mm space at the sides, front and back from the wall.
-
Follow the instruction when installing the appliance. If improperly installed, it may cause electric leakage or lead to overheat. Connect the original power cord with plug to an independent 13A socket. If fixed connection wiring is needed, connection must be incorporating an independent switch with 13A or above in accordance with the Electricity Ordinance.
-
If dedicated circuit wiring is connected incompatibly, it may probably lead to abnormal raise of wiring temperature.
-
Installation should be done by a qualified electrician. If the connection or repairing is finished improperly, it may cause electric leakage, malfunction or hazard.
-
Never disassemble, repair or modify the appliance by yourself. Attempt to do so may cause the appliance to abnormal operation or cause hazards.
-
Install the grounding completely with related ordinance. Installation of grounding can avoid electric shock once electric leakage occurs.
-
The grounding should be installed by a qualified electrician. If installed improperly, it may lead to electrical leakage.
-
If the power cord is damaged, it must be replaced by Shun Hing Electric Service Centre Ltd. in order to avoid hazard.
-
Do not step on or drop any hard objects on the top plate. If it is cracked or broken, it may cause overheat, abnormal operation or electric shock.
* WARNING:** If the surface is cracked, switch off the appliance to avoid the possibility of electric shock. -
Do not touch the top plate or other heating areas during operation. It may cause burn or other hazards.
-
Use heat resistant materials for countertop where it should be the same or better than thermosetting high-pressure decorative sheet. If the materials are not heat resistant, it may cause deformation or fire. Do not use varnished material as they may cause discolor.
Product Installation Dimensions
(Unit: mm)
Customize Kitchen Cabinet (Built–in)
(Unit: mm)
3.1 Adhesive tape
The supplied adhesive tape is about 3 meters long. Cut off 90º (Diagram 1) of
the adhesive tape and fold it into an inner angle 90º (Diagram 2), then remove
the protection paper of the adhesive tape, adhere to the surrounding of the
countertop. Remove the protection paper from the other side of the adhesive
tape, then place the appliance on top of the countertop accurately and
compress tightly.
*** Note: Stick the adhesive tape around the countertop. Do not cut it
apart; otherwise, it may affect the sealing performance.
3.2 Ensure the space of intake to the cabinet and the space at bottom of
the appliance are correct for sufficient ventilation.
(Unit: mm)
Insert the appliance backside into countertop first and fit whole unit.
- Do not drop the appliance onto the countertop.
- Confirm the clearance distance between the bottom frame and the countertop are exactly same from front to back and from side to side.
- If power cord is trapped between the cabinet and the bottom/ side of the appliance, the existence of uneven gap may cause vibration.
- If there is a bulge on the countertop, do not install the appliance on top of it.
- Place the appliance horizontally into the installation hole and make sure the appliance is installed evenly and stable.
3.3 If the thickness of the countertop excesses 20 mm, the exceed part of
the back of countertop should be beveled with a plane.
(Unit: mm)
3.4 In case the partition board is installed, or there is no air intake
part.
(Unit: mm)
Make use of holesaw to create holes on the partition (see the picture below)
Important Notice
Do not place any miscellaneous objects at the bottom of the appliance for
sufficient ventilation.
Installation Location
(Unit: cm)
Distance from the wall (If surrounding wall is combustible / non fire
protection construction wall)
*** Note: Example in the blanket which equipped with flameproof construction
or heat insulation board will be introduced.
Installation of heat insulating board
(Unit: cm)
If the actual situation cannot fulfill the recommendation shown above, install
heat insulation board instead and follow the installation instruction shown
below.
Important Notice
Do not let the appliance metal parts in contact with those metals in the
kitchen during installation.
If the metal part of the appliance is touching another metal material, keep
the material inside the wall (i.e. metal lath)
Electrical Work (Electrical work should be carried out by qualified
electrician.)
- The local wiring, earthing and safety regulations must be followed.
- Power supply shall be disconnect easily in case of emergency.
- To avoid stretching or twisting the power cord, beware of power plug direction.
5.1 Installation of wall socket (Built-in)
- Install the power socket at a location where the plug can be taken off easily during normal usage.
5.2 Installation of wall socket (Free-standing)
- Install the power socket to a location away from hot air, water source and food spattered areas.
Special Avowal
- This information above has been checked; our company reserves the hermeneutic power to any print errors or misunderstanding on the content.
- Please note that any technology improvement will be added to the new versions of operation manual and installation instruction without any prior notices.
- In case there is any inconsistency or conflict between the English versions and Chinese versions of the terms, the Chinese versions shall prevail.
- The product appearance, color, specification, installation diagram and installation size etc. are subject to the actual appliance.
- E-copy of installation manual can be sent by e-mail on request, please call Shun Hing Electric Works & Engineering Co., Ltd at 2861 2767.
Office: 9/F, Peninsula Centre, 67 Mody Road, Tsim Sha Tsui East, Kowloon, Hong
Kong
Tel: 2861 2767
Fax: 2865 6706
Website: http://www.rasonic.com
E-mail: shew@shunhinggroup.com
Customer Service Centre
1/F, Shun Hing Centre, 2 Shing Yiu Street, Kwai Chung, N.T.
9/F., Block B, Peninsula Centre, 67 Mody Road, Tsim Sha Tsui East, Kowloon
22/F, Parkview Centre, 7 Lau Li Street, Tin Hau, Hong Kong
Avenida de Venceslau de Morais, No. 193-199, 5 andar – I, Edf. Industrial Nam
Leng, Macau
For the latest information of Hong Kong and Macau service center, please visit
http://www.shesc.com/en
RIC-S1022
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>