FLAME BTS500 1000W Party Speaker User Manual
- June 12, 2024
- FLAME
Table of Contents
FLAME BTS500 1000W Party Speaker User Manual
PACKAGE CONTENTS:
1 x Speaker
1 x USB Charging Cable
1 x Microphone Included
1 x User Manual
SPECIFICATIONS
Output Power: 5W x 2
Driver Size: 102MM
Operation Distance: 10M
Bluetooth Specification: V5.0
Operating Distance: 10m
Battery: built-in rechargeable 2400mAh Lithium-ion
Input Voltage: DC 5V
Frequency response: 150-18KHZ
Battery Capacity: 3.7V 2400mAh
Playback time: Approx. 3hrs
Charging Time: Approx. 4hrs
Loudspeaker: 4″ x 2, 10W
Distortion: ≤10%
S/N ratio: 80dB
Multimedia Input: Micro SD/USB
FM frequency range: 87.5-108.0Mhz
SPEAKER BUTTON FUNCTIONS
CHARGING 6 POWERING ON YOUR SPEAKER
- Use the included USB cable to fully charge the speaker for a minimum of 4 hours before first use when charging the LED indicator light will be on.
- Flip the ON/OFF switch to turn on or off the speaker
BLUETDDTH® PAIRING WITH YOUR DEVICE
- Once powered on, the speaker will automatically g into PAIRING MODE
- Pairing mode will last for 2 minutes. While in pairing mode, turn 0.N the Bluetooth® connection on your device, scan/search & select BTSSOO.
- Once paired successfully, speaker will voice prompt ‘CONNECTED’
HOW TO CONNECT THE UNIT
Turn on the speaker unit and the Mobile or other devices, and search for the unit’s model name” BTS500″ to pair the two devices. Once paired before, it will automatically connect after the unit is turned on.
WIRELESS – Turn on the speaker and it will come into the wireless mode directly. After pairing the device, it can play the music. Press “ ” button to Play/Pause. Short press “ /V-” or “ /V+” button to be previous track or next track, long press “/V+” or “K4/V-” button to increase or decrease the Volume.
USB/TF CARD – Insert the U flash memory or TF card into the USB/TF slot, BTS500-B will read the MP3 format music automatically. Press ” button to Play/Pause. Short press “ /V-” or “ /V+” button to be previous track or next track, long press “ /V+” or ” /V-” button to increase or decrease the Volume.
FM RADIO -Long press /SCAN to search FM channels automatically. This operation will scan all FM stations and Pr-record them to memory. The scan procedure will take several minutes and cannot be interrupted. Once completed, short press “ /V-” or “ /V+” button to be previous track or next track, long press “ /V+” or ” /V-” button to increase or decrease the Volume.
RGB LIGHT MODE -There are 12 kinds different RGB light colors. Short press “LED” button to switch between different light modes, long press to turn off and turn on the lights.
TWS- Two the same model speakers can be connected to one wireless device at the same time. First, turn the speakers on, then choose one unit and long press its “ MODE ” button for several seconds then you will hear the sound of “ DING ~” to indicate that the two units have paired successfully. Please ensure before pairing that the two units are not connected with other devices.
CHARGING Plug the USB cable into the speaker’s charging port and connect to the power source.
The red LED indicator on panel will be lit when the unit is charging.
NOTE
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
Itowever, there is no guarantee that interference will not occur in particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the Interference by one or more
of the following measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment.
FCC Radiation Exposure Statement.
This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
SAFETY & CARE INSTRUCTIONS
DO NOT expose any portion of this product to liquid, humidity moisture, sharp objects, or extreme temperatures as this can damage it and void the warranty.
DO NOT attempt to modify or disassemble this product in any way. Spot Clean ONLY.
Adjust the speaker volume to a suitable level to avoid hearing damage or the damage to the speaker.
WARRANTY
Sparq Audio, Inc. warrants to the original retail purchaser that this product will be free of defects in material and workmanship for up to 2 years of the product from the original date of purchase.
Should any such defect occur, Sparq Audio, Inc. agrees, at it’s sole discretion, to repair or replace this product with the same or similar item at no charge to the original purchaser. This warranty does not cover misuse, neglect, accident or abuse.
To exercise the aforementioned warranty, please visit our website, www.spargaudio.com for more information.
2023 Sparq Audio, Inc. All rights reserved.
All rights reserved. No portion of this package may be reproduced or transmitted in any form or by any means without the express written permission from Sparq Audio, Inc.. Unauthorized reproduction or distribution of this package, design, or any portion of it will be prosecuted to the maximum extent possible under law. All brand names and trademarks belong to their respective owners.
MANUFACTURED BY: Sparq Audio, Inc. 5 Jules Lane, New Brunswick, NJ 08901
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>