Savio GCS-01 Charging Station For Playstation 5 Controllers User Manual

June 12, 2024
Savio

Savio-LOGO

Savio GCS-01 Charging Station For Playstation 5 Controllers

Savio-GCS-01-Charging-Station-For-Playstation-5-Controllers-
PRODUCT

Thank you for choosing Savio product!
If our product meets your expectations, share your opinion with other people on the portal ceneo.pl, social media or on the website of the store where you made the purchase. If you want to show our device on SAVIO Facebook Page, we will be very pleased.
If there is something that we could improve on our products, please write to us at support@savio.net.pl
Thanks to your feedback, we will be able to better adapt the product to your expectations.

Before starting the use of purchased device it is recommended to read the whole manual.

The main features of the product:

  • Compatible with PlayStation 5 controllers
  • Charging two controllers at the same time
  • Diodes informing about the charging status
  • Overvoltage and short circuit protection

Diagram of the device

Savio-GCS-01-Charging-Station-For-Playstation-5-Controllers-
FIG-1

  1. The base of the device
  2. Loading port 1
  3. Loading port 2
  4. LED indicators
  5. USB-C socket
  6. USB-A to USB-C cable

Package Contents

  • SAVIO charger for PS5 controllers
  • USB-C cable, 1 m
  • User manual

Technical specification

  • Ambient temperature range: -40ºC to +85ºC
  • Dimensions: 124×165×80.4 mm
  • Weight: 130 g
  • Input voltage: 5V ⎓ 2A
  • Charging time for controllers: up to 3 hours
  • Cable length: 1 m
  • Charging port: USB-C

Device installation

  1. Connect the charging station to the 5V power supply or the console’s USB port with the USB-C cable.
  2. Place the controller in the correct place on the device. When the controller connects correctly with the charging station, the red LED will light which will inform you that the device is charging.
  3. When the red LED turns off and the blue LED turns on, the controller is fully charged.

Safety conditions

  • Use the product in accordance with its intended use, as improper use may damage the product.
  • Do not expose the device to moisture, heat or sunlight, do not use the product in a dusty environment.
  • The device should be cleaned only with a dry cloth.
  • Independent repairs and modification result automatic loss of the warranty.
  • Hitting or dropping may damage the product.

Warranty

  • The warranty covers a period of 24 months. Independent repairs and modifications result in automatic loss of the warranty.
  • Warranty card is available for download on our website: www.savio.net.pl/en/service

Disposal

Information of the utilization of electrical and electronic equipment

This symbol indicates that electrical appliances should not be discarded with other household waste. Used equipment should be handed over to a local collection point for this type of waste or to a recycling center. Please contact your local authorities for information about disposal methods available in your area. Waste electrical equipment may contain hazardous substances (e.g. mercury, lead, cadmium, chromium, phthaltes) which can get into air, soil and groundwater when leaking from used appliances. Environmental pollution with these substances leads to their bioaccumulation, causing lesion of disease in living organisms, which would pose a risk to human and animal health or life. Households may contribute to environmental protecion by proper waste collection. In such way, hazardous substances from the equipment are neutralized and valuable secondary raw materials are reused for production of new equipment.

Information for customers and contractors and communication regarding complaints

Pursuant to Article 13 section 1 and 2 of the General Data Protection Regulation (EU) 2016/679 of the European Parliament and of the Council of 27 April 2016 (hereinafter referred to as GDPR), please be advised that Elmak Sp. z o.o., with its registered seat at ul. Morgowa 81; 35-323 Rzeszów becomes the Administrator of your personal data. The Specialist for General Data Protection (SODO) can be contacted in writing to: SODO, Elmak Sp. z o.o., ul. Morgowa 81; 35-323 Rzeszów, via e-mail address: sodo@elmak.pl, and by phone at +48 (17) 854 98 14. Your personal data will be processed in order to perform the contract, in accordance with Article 6(1)(b) of the aforementioned regulation, to the extent resulting from tax laws and financial regulations. Recipients of your personal data include entities authorized by legal regulations to obtain personal data as well as processing entities providing services to Elmak Sp. z o.o. Your personal data will be stored on the basis of Administrator’s legitimate interest. You have the right to access your data, and the right to rectify, delete or limit processing of your data. You have the right to lodge a complaint to the supervisory body if you believe that the processing violates the GDPR. The provision of personal data is voluntary, however, a failure to provide such data may result in a refusal to conclude or in termination of a contract. Your personal data will not be subjected to automated decision making, including profiling referred to in Article 22 section 1 and 4 of the GDPR of April 27, 2016.

www.savio.net.pl/en/download

PRODUCER

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals