NEUTRIK BDA 556 V3 powerCON Cable Connector Instruction Manual
- June 12, 2024
- NEUTRIK
Table of Contents
NEUTRIK BDA 556 V3 powerCON Cable Connector
Product Information
The product is a connector designed for electrical equipment. It has a maximum
capacity of 1 Newton and is intended for power input and output connections.
The product is manufactured by Neutrik AG, a brand of the Neutrik Group. The
manufacturer is responsible for ensuring conformity with applicable regulatory
documents.
Approval Standards:
- VDE EN 60320-1
- UL 60320-1
- CAN/CSA-C22.2 No. 60320-1
Product Usage Instructions
Connecting:
- When connecting the cable, ensure that the notch on the cable connector matches the corresponding guide slot on the chassis.
- Incorrect insertion may cause electrical contact misalignment, leading to equipment malfunction and/or personal injury.
- After inserting the cable properly, as illustrated in AA, twist the cable connector clockwise to lock it in place.
Unlocking:
To unlock the connector, follow the reverse process of connecting. Twist the cable connector counterclockwise to unlock it from the chassis.
Application Instructions:
The connector can be used with other equipment for power input and output connections. The following connector assignments are applicable
| Connector Type | Power In | Power Out |
|---|---|---|
| NAC3MPX-TOP, NAC3MPX-WOT-TOP | Appliance Inlet | Not Applicable |
| NAC3FPX-TOP, NAC3FPX-WOT-TOP, NAC3FPX-ST-TOP | Not Applicable | Appliance Outlet |
| NAC3PX-TOP | Appliance Inlet/Outlet Combination | Appliance Inlet/Outlet |
Combination
NAC3FX-W-TOP (Connector), NAC3MX-W-TOP (Plug connector)| Power In| Power Out
Rating:
| Cable Type | Cable O.D. | Rating |
|---|---|---|
| H05VV-F3G 1.0 mm2, Length max. 2 m | 6.0 – 12.0 mm | 250 V ac / 16 A |
| H05VV-F3G 1.5 – 2.5 mm2 | 6.0 – 12.0 mm | 250 V ac / 16 A |
| H07RN-F3G 1.5 mm2 | 6.0 – 12.0 mm | 250 V ac / 16 A |
| SJTOW, SJOOW 3 x 12 AWG | 6.0 – 12.0 mm | 250 V ac / 20 A |
Note: This information is based on the product manual with draft number
BDA 556, last updated on June 28, 2023.
For more information and support, please visit the Neutrik AG website at
www.neutrik.com.
CONNECTING
-
Note:
When connecting, match the notch on the cable connector to the corresponding guide slot on the chassis
SAFETY WARNING
incorrect insertion may cause electrical contact misalignment resulting in equipment malfunction and/or personal injury. -
Note:
After inserting properly as in illustration A , twist the cable connector clockwise to lock. -
Note:
The proper twist-lock is achieved when the silvery tab is in the position shown in C and an audibel «click» is heard.
UNLOCKING
APPLICATION INSTRUCTION
Application other equipment
- The powerCON TRUE1 system is certified as a connector with breaking capacity according to IEC 60320, ® ® VDE 0625.
- It is intended for use as an appliance coupler and interconnection coupler.
- It serves to supply power to an appliance and from an appliance to other equipment.
- To be installed by a qualified person only.
CONNECTOR ASSIGNMENT
powerCON TRUE1 TOP line is fully backward compatible with the preceding powerCON TRUE1 products
The manufacturer of cord sets and interconnection cord sets is responsible for the conformity assessment according to the applicable regulatory documents
Approval based:| VDE
EN 60320-1
| UL 60320-1
CAN/CSA-C22.2 No. 60320-1
---|---|---
Rating:| 250 V ac / 16 A| 250 V ac / 20 A
Cable Type:| H05VV-F3G 1.0 mm 2 , Length max. 2 m| SJTOW,
SJOOW 3 x 12 AWG
| H05VV-F3G 1.5 – 2.5 mm 2|
| H07RN-F3G 1.5 mm 2|
Cable O.D.:| 6.0 – 12.0 mm| 6.0 – 12.0 mm
Draft. Nr.: BDA 556 V3
Update: 2023-06-28
Neutrik AG I LI-9494 Schaan
Data subject to change without prior notice. © 2023 NEUTRIK®. NEUTRIK®,
powerCON are registered trademark of Neutrik AG. ALL RIGHTS RESERVED.
www.neutrik.com
Neutrik AG I LI-9494 Schaan
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>