BEYOND ELEMENT LED Down Light User Guide

BEYOND ELEMENT LED Down Light

Instructions

Beyond LED’s Down Light is an energy-efficient and economical product that is equipped with a smooth trim that fits 6’’ recessed can-style housings. It utilizes adjustable torsion springs, can be dimmed down to 10%, and maintains 70% light output after 35,000 hours of use. These luminaires are ideal for corporate environments, educational & health facilities, basements, and give an exceptional performance in general lighting applications for hotels, motels, residential and commercial properties. An E26 adapter is included. The Down Light provides for improved focus and concentration with reduced glare and uniform illumination. Moreover, these fixtures produce a high quality of light with superior longevity and energy savings. These ETL certified panels are ideal for brightening up indoor spaces.

Product Features

• Operating temperature: -20°C to 50°C
• 1000 Lumens output
• Compatible with IC and non-IC rated air-tight recessed housings and is Energy Star qualified
• Illuminates down to 10% with most electronic dimmers
• Adjustable CCT 2700K, 3K, 4K and 5K
• Dimming capability
• Durable thermoplastic construction
• Plug and play motion sensor
• Integral LED driver, eliminates the need for an external driver or ballast
• Energy Star Certified
• Spotless soft light without shadow
• Input Voltage 120Vac 60Hz
• No UV or IR in the beam
• Environment friendly with no mercury
• Easy to install and operate, with instant and no humming
• Energy saving with long lifespan with 35,000-hour LEDs at L70 reduces life cycle maintenance costs
• 5 years manufacturer warranty

SKU #| Model #| Watts| Lumens| CCT| Dimmable| Certifications
---|---|---|---|---|---|---
153606| BLT-D836- CCT-90| 15W| 1000LM| 2700K/3K/4K/5K| Yes| ETL & ES

SKU Number 153606 Specifications

Correlated Color Temperature (CCT)

Dimensions

Electrical Data

Photometric Data

Spectral Distribution

Luminous Intensity Distribution Curve

Installation Instructions

General
All electrical connections must be in accordance with local and national electrical code (N.E.C.) Standards. If you are unfamiliar with proper electrical wiring connections obtain the services of a qualified electrician. Remove the trim from the box and make sure that no parts are missing by referencing the parts illustrations.

Warning – Risk of Fire or Electric Shock

• Do not make or alter any open holes in an enclosure of wiring or electrical components during kit installation.
• To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or other sharp objects.
• Suitable for wet locations.
• Suitable for type ic or suitable for type non-ic.
• Use only in open luminaires.
• This device is not intended for use with emergency exits.
• “Warning – risk of fire or electric shock. Led retrofit kit installation requires knowledge of luminaires electrical systems. If not qualified, do not attempt installation. Contact a qualified electrician.” or equivalent.
• “Warning – risk of fire or electric shock. Do not alter, relocate, or remove wiring, lamp holders, power supply, or any other electrical component.” or equivalent.
• “Warning – risk of fire or electric shock. Install this kit only in the luminaires that have the construction features and dimensions shown in the photographs and/or drawings.” or equivalent.

Incandescent Housings

• Unscrew the WING NUT inside the CAN to detach the SOCKET BRACKET from the CAN. Disengage the SOCKET from the SOCKET BRACKET. (FIG. 2)
• Thread the SOCKET ADAPTER into the SOCKET. (FIG. 3)
• Plug the FEMALE CONNECTOR of the RETROFIT TRIM onto the MALE CONNECTOR of the SOCKET ADAPTER ASSEMBLY. (FIG. 4)
• If using TORSION SPRINGS, squeeze both TORSION SPRING arms together and insert into the TORSION SPRING SLOTS (or RECEIVER BRACKETS) of the CAN. (FIG. 5)
• Tuck all wires into the CAN and carefully push the RETROFIT TRIM into CAN. (NOTE: To provide enough room in shallow cans, carefully position SOCKET ADAPTER and SOCKET adjacent to the long side of the LED DRIVER prior to inserting the RETROFIT TRIM into the CAN.) (FIG. 5)
• Plug the FEMALE CONNECTOR of the RETROFIT TRIM onto the MALE CONNECTOR of the HALO HOUSING. (FIG. 4)
• If using TORSION SPRINGS, squeeze both TORSION SPRING arms together and insert into the TORSION SPRING SLOTS (or RECEIVER BRACKETS) of the CAN. (FIG. 5)
• Tuck all wires into the CAN and carefully push the RETROFIT TRIM into CAN. (NOTE: To provide enough room in shallow cans, carefully position SOCKET ADAPTER and SOCKET adjacent to the long side of the LED DRIVER prior to inserting the RETROFIT TRIM into the CAN.) (FIG. 5)

LED Housings

Assembly and Installation

Dimming
Dimming performance may depend on the dimmer, the dimmer range adjustment setting (for dimmers with brightness range adjustments), the wiring method, and/or the number of LED modules installed onto the dimmer circuit.

• For dimmer selection, dimming control manufacturers revise their product often; for the latest list of compatible dimmers please visit our website.
• For best results, it is recommended to install a minimum of four LED modules onto one dimmer.
• Before turning on the LED lights, set dimmer position at maximum before adjusting to a lower light level.
• Please follow the dimming control manufacturer’s instructions for the installation of all dimming controls.

Inner Box

Dimensions

Application

Safety Precautions
To reduce the risk of death, personal injury or property damage from fire, electric shock, falling parts, cuts/abrasions, and other hazards read all warnings and instructions included with and on the fixture box and all fixture labels. Before installing, servicing, or performing routine maintenance upon this equipment, follow these general precautions. Commercial installation, service and maintenance of luminaires should be performed by a qualified licensed electrician.
For the installation: If you are unsure about the installation or maintenance of the luminaires, consult a qualified licensed electrician and check your local electrical code. To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or other sharp objects. Do not make or alter any open holes in an enclosure of wiring or electrical components during kit installation.

WARNING: RISK OF FIRE OR ELECTRICAL SHOCK
Turn off electrical power at fuse or circuit breaker box before wiring fixture to the power supply. Turn off the power when you perform any maintenance. Verify that supply voltage is correct by comparing it with the luminaire label information. Make all electrical and grounded connections in accordance with the National Electrical Code and any applicable local code requirements. All wiring connections should be capped with UL approved wire connectors.

CAUTION: RISK OF INJURY
Avoid direct eye exposure to the light source while it is on. Account for small parts and destroy packing material, as these may be hazardous to children.

Warranty

5 Years Warranty
This product is warranty to be free from defects in workmanship and materials for up to 5 Years from date of purchase. If it fails to do so, please contact Beyond LED technology at sales@beyondledtechnology.com or call 1(866) 786-1117 for instructions on replacement.
Beyond LED Technology | 1939 Parker Ct, Stone Mountain, GA, 30087
Due to continuous product improvement, information in this document is subject to change.

References

• Wholesale Lighting Distributors & LED Lighting Solutions – Beyond LED Technology
• Wholesale Lighting Distributors & LED Lighting Solutions – Beyond LED Technology

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>