The Home Depot K3024 3 Tier Corner Baker’s Rack Kitchen Storage Instruction Manual
- June 12, 2024
- THE HOME DEPOT
Table of Contents
The Home Depot K3024 3 Tier Corner Baker’s Rack Kitchen Storage Instruction
Manual
NOTE TO CUSTOMERS
- For ease and speed of assembly we recommend that before you commence each step of the assembly that you identify all the parts required to complete that step.
- We recommend that where possible you allow sufficient space to assemble the item as close as possible to the place where it will be once assembled.
- For the protection of your furniture we recommend that the product is placed on protected surfaces during assembly to prevent any damage.
- During assembly do not over tighten, as this may damage the product.
- Please ensure you retain all the product packaging until the item completely assembled.
- Please periodically check all fittings and re-tighten as necessary.
- It is recommended that this item should be assembled by two adults.
Part List
-
Left Side Frame
-
Right Side Frame
-
Left Leg
-
Right Leg
-
Bottom Net Rack
-
Middle Net Rack
-
Top Net Rack
-
Center Panel
Hardware List
-
Bolt
-
Bolt
-
Bolt
-
Screw
-
Allen Wrench
Assembly instruction
Step 1
Insert Side Frames A1 &A2 to the holes on Legs A3&A4,then tighten them using Bolts B2 as shown above. Please do not tighten Bolts B2 until Step 4.
Step 2
Assemble Left Side Frame A1l and Left Leg A3 to Right Side Frame A2 and Right Leg A4 using Bolts BI &B3. Please do not tighten Bolts B1 & B3 until Step 4.
Step 3
- Assemble Top Net Rack A7 and Middle Net Rack A6 to Side Frames A1 &A2 using Bolts B1.
- Assemble Bottom Net Rack A5 to Legs A3&A4 using Bolts B1. Please do not tighten Bolts B1 until Step 4.
Step 4
Assemble Center Panel A8 to Legs A3 &A4 using Screws B4. Please tigthen all Bolts B1 &B2 & B3 at this point.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>