SuZhou 3G-PRO Wireless Earphone User Manual

SuZhou 3G-PRO Wireless Earphone

Product Information

Product Name: Wireless Earphone 3G PRO

Description

The Wireless Earphone 3G PRO is a high-quality wireless earphone that allows you to enjoy your favorite music and audio content without the hassle of tangled wires. It provides a seamless and convenient listening experience with its advanced wireless technology.

Features

• Wireless connectivity
• High-quality audio transmission
• Comfortable and ergonomic design
• Long battery life
• Easy to use controls

Specifications

• Wireless Technology: Bluetooth
• Battery Life: Up to 10 hours
• Charging Time: 2 hours
• Compatibility: Works with most Bluetooth-enabled devices
• Weight: 20 grams

Product Usage Instructions

To ensure optimal performance and usage of the Wireless Earphone 3G PRO, please follow the instructions below:

1. Reorient or relocate the receiving antenna of your audio device if you experience any signal interference.
2. Increase the separation between the equipment and the receiver to minimize any potential audio distortions.
3. Connect the equipment to a power outlet on a different circuit than the one to which the receiver is connected. This helps prevent any electrical interference.
4. If you encounter any difficulties or require assistance, consult your dealer or an experienced radio/TV technician for help.

Note : Please refer to the detailed user manual provided with the product for more specific instructions on pairing, charging, and controlling the Wireless Earphone 3G PRO.

FCC Requirement

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions , may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

+ios

To C:CM•ct to IPtlan• With In• l1te11 ~•rtlon of lot,, 1’Dllow1i.p11-2.

1. Turn on Bluetooth®.
   Connect to Wi-Fi and turn on Bluetooth

2. Connect EarPhone Pro Open
   case, hold near unlocked iPhone, then follow onscreen instructions

Use with your other Apple devices.
EarPhone Pro work with your other decices signed in to iCloud Select EarPhone Pro in Control Center (iOS and iPadOS) or menu bar (macOS)
Connect to other devices.
With EarPhone Pro in case and lid open, press button on back until light blinks Then go to Bluetooth settings and choose EarPhone Pro
Press to play or pause

Double-press to skip forward Triple-press to skip back

Double-press to skip forward

****Triple-press to skip back

Press and hold

Switch between Active Noise Cancellation and Transparency modes.

Change ear tips.

To remove tip. pull firmly To attach tip. push until it clicks

Charge wirelessly

EarPhone Pro charge in the case Place case with status light facing up on a Qi-certified charger Or charge using the Lightning connector

© 2019 Phone Inc All rights reserved The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG Inc and are used under license ioS is a trademark of Cisco and is used under license Designed by Phone in Cahfornia Printed in China 2A034-03623-A

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>