Lorelli ELIZA/ELIZA LUXE Baby Rocker Instruction Manual
- June 4, 2024
- lorelli
Table of Contents
Lorelli ELIZA/ELIZA LUXE Baby Rocker
Scan
the QR code to get more product information and manual instruction in more
languages. Download QR Scanner App onto your device.
PARTS
- Metal Frame – 1pcs.
- Rear Pipe – 1 pcs.
- Baby Lounge Body – 1 pcs.
- Toy bar – 1 pcs.
IMPORTANT! KEEP FOR FUTURE REFERENCE! READ CAREFULLY!
SAFETY REQUIREMENTS
- WARNING Never leave the child unattended!
- Do not use the reclined cradle once your child can sit unaided!
- This reclined cradle is not intended for prolonged periods of sleeping!
- It is dangerous to use this reclined cradle on an elevated surface, e.g. a table!
- Always use the restraint system!
- Never use the toy bar to carry the reclined cradle!
- The maximum weight of the child for which the reclined cradle is intended is 9 kg.
- This reclined cradle does not replace a cot or a bed. Should your child need to sleep, then it should be placed in a suitable cot or bed!
- Do not use the reclined cradle if any components are broken or missing!
- Do not use accessories or replacement parts other than those approved by the manufacturer!
- WARNING The toy bar is an additional article. Never use the toy bar to move the product! The toy bar shall be mounted by an adult! Keep the unmounted toy bar out of children’s reach!
- Do not leave the child unattended! Do not attach additional cords and fasteners to the toy! Do not modify the toy and do not modulate it to other objects! Do not bind the toys together! Remove the toys from the sleeping baby!
- Keep away from fire!
-
Put the rocker on horizontal and even surfaces.
-
Before using check the condition of the two regulating mechanisms for adjusting the position of the backrest and the four plastic legs on the lower end of the metal
construction. -
On adjusting the backrest you must be sure that both mechanisms are well locked in the chosen position.
-
Do not use the rocker as a car seat as this is not its function.
-
Do not leave the rocker near a switched on fan, heat sources, sharp objects and water containers.
-
When carrying the rocker use the handles.
-
Remark – Images on the title page and in the instruction manual are only illustrative and may differ from the real product.
MAINTENANCE AND CARE
- Wipe Clean with a damp cloth and mild soap. Air dry.
- The metal and plastic parts can be cleaned with lukewarm water and mild soap detergent.
INSTALLATION
-
Insert both pipes of the metal construction of the baby lounge into the pipes of the main body of the lounge
by pressing the metal element.
-
Insert the rear pipe of the lounge into the assembled metal frame by following the same operations as in point 1.
-
Fasten the textile belts on the back side of the lounge.
-
To install the toy bar aim and press the attaching clips to the metal body pipes until “click” sound is heard.
USAGE
There are five positions of the backrest:
- By simultaneously pressing the buttons of the adjusting mechanisms of the backrest put it in the chosen position.
- Unlock the buckle of the safety belt by simultaneously pressing the both wafers.
Swinging function: - Swinging function is activated when the four plastic elements on the metal frame are in position shown in.
- For stationary position of the baby lounge ( not to swing ) turn the plastic elements on the metal frame.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>