Eonome S3 Active Noise Cancelling Headphones User Manual

June 12, 2024
Eonome

Eonome S3 Active Noise Cancelling Headphones

Product Information

  • Product Name: Bluetooth Headphone
  • Model: 902025PL
  • Rating: 3.7V, 400mAh 1.48Wh

Important Safeguards
Please read and retain these instructions for future use. If this product is passed to a third party, these instructions must be included.

Warnings
Made in China

Do not attempt to open or disassemble the battery. Do not short circuit the battery. The battery may explode if disposed in fire. Dispose or recycle used batteries according to the user’s guide.

Sound Pressure Warning
Do not listen at high volume levels for long periods as it may cause hearing damage.

The equipment should provide a means to actively inform the user of increased sound pressure when operated with an acoustic output exceeding RS1. This acknowledgment is not required more than once every 20 hours of cumulative listening time. Examples of means include visual or audible signals.

Package Contents

  • Bluetooth Headphone x1
  • User Manual x1
  • USB Charging Cable x1
  • Headphone Case x1

Product Features

  • Volume +/Play Next
  • Multi-function Button
  • Volume -/Play Pre
  • Indicator
  • Type-C Charging Port
  • 3.5mm Aux Input
  • Mode Button
  • Microphone

IMPORTANT SAFEGUARDS

Read these instructions carefully and retain them for future use. If this product is passed to a third party, then these instructions must be included.

WARNING:
DO NOT ATTEMPT TO OPEN OR DISASSEMBLE THE BATTERY.
DO NOT SHORT CIRCUIT THE BATTERY.
BATTERY MAY EXPLODE IF DISPOSED IN FIRE.
DISPOSE OR RECYCLE USED BATTERIES ACCORDING TO THEUSER’S GUIDE.

  • element 1:the symbol,IEC 60417-6044 (2011-01)
  • element 2:”High sound pressure” or equivalent wording
  • element 3:”Hearing damage risk” or equivalent wording
  • element 4:”Do not listen at high volume levels for long periods.” or equivalent wording

NOTE

  • The equipment shall provide a means to actively inform the user of the increased sound pressure when the equipment is operated with an acoustic output exceeding RS1.Any means used shall be acknowledged by the user before activating a mode of operation which allows for an acoustic output exceeding RS1.
  • The acknowledgement does not need to be repeated more than once every 20h of cumulative listening time.
  • Examples of means include visual or audible signals. Action from the user is always needed.
  • The 20h listening time is the accumulative listening time, independent of how often and how long the personal music player has been switched off.

Recommendations for the end-users
The following represents a typical, but non-exhaustive, list of good advice to be provided by the equipment manufacturer to the end-user.

  • Do not dismantle, open or shred secondary cells or batteries.

  • Keep batteries out of the reach of children. Battery usage by children should be supervised. Especially keep small batteries out of reach of little children.

  • Seek medical advice immediately if a cell or a battery has been swallowed.

  • Do not expose cells or batteries to heat or fire. Avoid storage in direct sunlight.

  • Do not short-circuit a cell or a battery. Do not store cells or batteries haphazardly in a box or drawer where they may short-circuit each other or be short-circuited by other metal objects.

  • Do not remove a cell or battery from its original packaging until required for use.

  • Do not subject cells or batteries to mechanical shock.

  • In the event of a cell leaking, do not allow the liquid to come in contact with the skin or eyes. If contact , please rinse with copious amounts of water and seek medical
    advice.

  • Do not use any charger other than that specifically provided for use with the equipment.

  • Observe the plus (+) and minus (-) marks on the cell, battery and equipment and ensure correct use.

  • Do not use any cell or battery which is not designed for use with the equipment.

  • Do not mix cells of different manufacture, capacity, size or type within a device.

  • Always purchase the battery recommended by the device manufacturer for the equipment.

  • Keep cells and batteries clean and dry.

  • Wipe the cell or battery terminals with a clean dry cloth if they become dirty.

  • Secondary cells and batteries need to be charged before use. Always use the correct charger and refer to the manufacturer’s instructions or equipment manual for proper charging instructions.

  • Do not leave a battery on prolonged charging when not in use.

  • After extended periods of storage, it may be necessary to charge and discharge the cellsor batteries several times to obtain maximum performance.

  • Retain the original product literature for future reference.

  • Use the cell or battery only in the application for which it was intended.

  • If possible, remove the battery from the equipment when not in use.

  • Dispose properly.

Package Contents

  • Bluetooth Headphone*1
  • User Manual*1
  • USB Charging Cable*1
  • Headphone Case*1

Product Feature & Key Function

Eonome-S3-Active-Noise-Cancelling-Headphones-1

  1. Volume +/Play Next
  2. Multi-function Button
  3. Volume -/Play Pre
  4. Indicator
  5. Type-C Charging Port
  6. 3.5mm Aux Input
  7. Mode Button
  8. Microphone

How to control

Eonome-S3-Active-Noise-Cancelling-Headphones-2

Power on/Power off

Power on: Long press the multi-function button for 2s, with a tone of “Power on”, boot with the default ANC mode.
Power off: Long press the multi-function button for 5s, with a tone of “Power off”, both Bluetooth and ANC mode are off.

Pairing

  1. When the headphone is off, long press the multi-function button for 5s for pairing, with a tone of “Pairing”.
  2. Select “S3 ” from the bluetooth lists of your mobile device for connection.

Eonome-S3-Active-Noise-Cancelling-Headphones-3

Eonome-S3-Active-Noise-Cancelling-Headphones-8

Pairing with Another Device

Turn off the bluetooth of the connected device (the one connected with), use the new device to search for the bluetooth name”S3″ and
click it for connection, it can be paired with another new device, after successful pairing, turn on the bluetooth of the first device, the headphone will connect to the first connected device automatically.

  • S3 can only play music from one mobile device at a time. if you want to play on another device, please pause the currently playing device first.
  • Every time you turn on S3, it will connect to your recently connected device automatically (Within the effective bluetooth range).

Playing Mode Switch
Boot with the default ANC mode, with each press of the “M” button, the playing mode switches cycledly among ANC-Normal-Transparency-ANC.

AUX Mode
Audio can be played on external devices by plugging in the 3.5mm AUX cable.
*You can still listen to music even if the headset battery is exhausted, but Active Noise Cancellation is not available.

Resetting
If any connection issues or malfunctions, you may need to reset the headphone. Plug in the charging cable first, hold the multifunction button and volume up button at the same time for 5s until the LED indicator flash red and blue alternately twice.

Charging

  • Before charging, make sure the USB port is completely dry.
  • Use a certified USB-C charging cable and charger to avoid any damage to the device
  • Do not turn it on during charging.

Eonome-S3-Active-Noise-Cancelling-Headphones-4

Eonome-S3-Active-Noise-Cancelling-Headphones-9

Specifications

If there are any changes with the specifications, please refer to the actual product.

Eonome-S3-Active-Noise-Cancelling-Headphones-10

Our customer support team is standing by to assist you. Please contact and give us a chance to help you if you have any problems for your order. We will answer your questions within 24 hours on our business days.
From Amazon to contact us as following steps: Login in Your Account-Your Orders-Contact seller-Wait the seller responded
If you are satisfied with the product, please just take a moment to share your wonderful shopping experience on amazon, which is a huge motivation for us to be a better seller.

Disposal

The Waste Electrical and Electronic Equipment (WEEE) Directive aims to minimize the impact of electrical and electronic goods on the environment, by increasing re-use and recycling and by reducing the amount of WEEE going to landfill. The symbol on this product or its packaging signifies that this product must be disposed separately from ordinary household wastes at its end of life. Be aware that this is your responsibility to dispose of electronic equipment at recycling centers in order to conserve natural resources. Each country should have its collection centers for electrical and electronic equipment recycling. For information about your recycling drop off area, please contact your related electrical and electronic equipment waste management authority, your local  city office, or your household waste disposal service.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Eonome User Manuals

Related Manuals