FABERCASTEL 6367000 Fold and Launch Paper Airplanes User Guide

FABERCASTEL 6367000 Fold and Launch Paper Airplanes

Choose your paper, fold, and fly! Complete set includes: 80 pieces of paper, foil stickers, and two quick-pull launchers. Plenty of high-flying fun to share with your friends and family.

Did you know, that paper airplane folding is similar to Origami, the Japanese art of paper folding?
Learning a new skill takes time and practice. You can watch our video tutorial or ask an adult or an older friend for help. With adult permission, use a smartphone’s camera to scan this QR code to bring up the video instructions.

Folding Technique
It’s very important to line up the paper with straight edges. making crisp folds.
When you see a dotted line, this means “fold here.”
When you see an arrow, this means fold from where the arrow starts to where the arrow ends.

Note : Square and rectangle papers will look different when folded, so some diagrams may not match your plane.

Making your planes
Most papers can be used for any airplane design except for the butterfly, dragon, bird, rocket, rainbow, and meteor shower.
These special papers should be folded using the ARROW design.

ARROW

1. With the solid side facing up, fold the paper in half lengthwise and open it back up.
2. Fold the corners to the center line.
3. Fold side corners to the center line.
4. Fold in half.
5. Fold one side down at an angle.
6. Flip and repeat the same fold on this side. It should look like this.
7. Bring the wings up so they are ready for flight.

STICKERS

Finish your planes off with the foil stickers.
Note : In order for the plane to stay balanced and fly correctly, stickers must be applied in the same spot on both sides.

If any areas of your plane are having a hard time staying folded, use a clear round sticker to help keep it in place.

LAUNCHER

1. With the printing facing up, fold in half lengthwise.
2. Fold side down to the center fold.
3. Fold the end back up so it stays horizontal.
4. Flip and fold the same as the previous side.
5. Stretch the rubber band over the top of the launcher, down the center and over the end of the center folds.

READY, SET, LAUNCH!

STANDARD

1. With the design facing up, fold the paper in half lengthwise.
2. Fold the corner to the center fold.
3. Flip over. Fold the other corner to the center fold.
4. Fold the side corner to the center fold.
5. Flip and repeat the same fold on other side. It should look like this.
6. Fold the long edge down to the center fold.
7. Flip and repeat the same fold on other side. It should look like this.
8. Bring the wings up so they are ready for flight.

TRADITIONAL

1. With the solid side facing up, fold the paper in half lengthwise, and open back up.
2. Fold the corners to the center line.
3. Fold side corners to the center line.
4. Fold in half.
5. Fold one side down straight across.
6. Flip and repeat the same fold on this side. Fold tips of the wings up.
7. Bring the wings up so they are ready for flight.

ACE

1. With the solid side facing up, fold the paper in half lengthwise and open back up.
2. Fold both corners to the center line.
3. Fold the top point down so there’s still room at the bottom.
4. Fold the side points to the center line, leaving the top point exposed.
5. Fold the top point up.
6. Fold the plane in half.
7. Fold one side down at an angle.
8. Flip and repeat the same fold on this side. It should look like this.
9. Bring the wings up so they are ready for flight.

LION

1. With the solid side facing up, fold the paper in half lengthwise and open back up.
2. Fold the corners into the center line.
3. Fold the side corners to the center line.
4. Fold the top point down so there’s still room at the bottom.
5. Fold the top point back up to look like this.
6. Flip and fold the plane in half.
7. Fold the wing down.
8. Flip and repeat on the other wing.
9. Bring the wings up so they are ready for flight.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>