MAZDA FWD L4-2.5L Truck CX-5 Instructions

June 12, 2024
MAZDA

MAZDA FWD L4-2.5L Truck CX-5 Instructions
MAZDA FWD L4-2.5L Truck CX-5

2016 Mazda Truck CX-5 FWD L4-2.5L (SKYACTIV-G)
Vehicle > Heating and Air Conditioning > Control Assembly > Service and Repair

Removal and Replacement

CLIMATE CONTROL UNIT REMOVAL/INSTALLATION [MANUAL AIR CONDITIONER]

CLIMATE CONTROL UNIT REMOVAL/INSTALLATION [MANUAL AIR CONDITIONER] SM1217005

Note

  • The climate control unit prior to replacement stores the vehicle specification information.
  • The new climate control unit does not store any vehicle specification information.
  • When the ignition is switched ON after the climate control unit is replaced, the climate control unit reads the vehicle specification information sent via CAN transmission from the instrument cluster, and stores the vehicle specification information
  1. Disconnect the negative battery cable. (See.) NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 2.0, SKYACTIV-G 2.5]

  2. Remove the following parts:

  3. Glove compartment (See GLOVE COMPARTMENT REMOVAL/INSTALLATION .)

  4. Decoration panel (See DECORATION PANEL REMOVAL/INSTALLATION .)

  5. Upper panel (See UPPER PANEL REMOVAL/INSTALLATION .)

  6. Selector lever knob (ATX) (See AUTOMATIC TRANSAXLE SHIFT MECHANISM REMOVAL/INSTALLATION .)

  7. Shift lever knob (MTX) (See MANUAL TRANSAXLE SHIFT MECHANISM REMOVAL/INSTALLATION [C66M-R] .)

  8. Shift panel (See SHIFT PANEL REMOVAL/INSTALLATION .)

  9. Rear console (See REAR CONSOLE REMOVAL/INSTALLATION .)

  10. Side wall (See SIDE WALL REMOVAL/INSTALLATION .)

  11. Front console (See FRONT CONSOLE REMOVAL/INSTALLATION .)

  12. Remove the screws.
    Remove the screws

  13. Remove the climate control unit while detaching the pins.

  14. Disconnect the connectors.

  15. Remove the indicator unit from the climate control unit. (See INDICATOR UNIT REMOVAL/INSTALLATION .)

  16. Install in the reverse order of removal.

  17. Switch the ignition ON and perform the climate control unit automatic configuration.

  18. Perform the DTC inspection for the climate control unit using the M-MDS. (See FOREWORD [MANUAL AIR CONDITIONER] .)
    If a DTC is detected, perform troubleshooting according to the DTC. (See DTC TABLE [MANUAL AIR CONDITIONER] .)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals