PHILIPS WT475C Pacific LED Gen5 Value Tube Light User Manual

PHILIPS WT475C Pacific LED Gen5 Value Tube Light

Product Information

• Product Name: Pacific LED gen5 Value
• Model Number: WT475C
• Operating Voltage: 220V – 240V
• Frequency: 50Hz – 60Hz
• Luminaire Type: Indoor
• IP Rating: IP66
• Impact Resistance: IK08
• Energy Efficiency Class: D
• Maximum Ambient Temperature: T45
• Driver Type: PSD, PSU, SIA

Product Usage Instructions

1. During installation and use, prevent water from entering the luminaire. Refer to the manual for installation details.
2. Do not open the luminaire when it is powered up to avoid the risk of electrostatic discharge.
3. The housing is made of non-metallic material. Prevent dust accumulation on the surface of the housing.
4. Clean the luminaire only with a damp cloth containing an antistatic agent.
5. For ceiling mounting (standard applications), follow the provided instructions.
6. If wall mounting in vertical and/or horizontal positions, use the special set of screws and nuts (WT470Z SCREW-VP SET) supplied as accessories.
7. Ensure proper cable routing and clamping using the specified clamping ranges for different cable sizes.
8. Follow the mentioned electrical characteristics for selecting the appropriate driver type and maximum number of luminaires per MCB.
9. For maintenance, do not touch electronic components.

WHAT’S INCLUDE

DIMENSION

Luminare type| System flux [lm] NB-HRO, WB, VWB/ PCO| System flux [lm] O| Lifetime HRS| Driver type| P(W)| Max ambient temperature
---|---|---|---|---|---|---
WT475C L1200/ L1600| 42S| 4200/ 3900| 4100| 50k L90| 35W PSD| 31,5| T45
50W PSU| 30,0
75W PSU| 30,5
35W SIA| 31,0
72S| 7200/ 6600| 6800| 50k L80| 60W PSU| 54,0
75W PSU| 55,0
60W PSD| 55,0
60W SIA| 54,0
WT475C L1800| 62S| 6200/ 5600| 6000| 50k L90| 60W PSD| 45,5
75W PSU| 44,0
60W SIA| 45,0
107S| 10700/ 9600| 10500| 50k L80| 90W PSU| 81,0
10000| 90W PSD| 81,0
100W SIA| 82,0

FEATURE

Ceiling mounting

For wall mounting applications in vertical and/or horizontal positions its required to use special set of screws and nuts (WT470Z SCREW-VP SET (10PCS), EOC: 871869638509800, 12NC: 910925864392 supplied as accessories).

Maintenance instructions

To assure the lighting quality of this unique LED lighting concept there are a few instructions regading the maintenance of this LED luminaire:

1. Do not touch electronic components!
   • Electronic components are under high voltage.
   • Electronic components are ESD sensitive.
2. During installation or when maintaining the luminaire please use static free gloves to avoid marks on the luminaire.
3. To remove dirt and spots use the following:
   • Dust: only use micro fiber cloths Fingerprints, etc.: use a cleaner for synthetic materials with antistatic properties.
4. Do not stare into the LED light beam.
5. To avoid scratches and dirt on optical parts remove protective foil after installation.
6. The luminaire shall be installed by a qualified electrician and wired in accordance with the lastest IEE electrical regulations or the national requirements.
7. Do not touch neither the LEDs nor the contacts into the connector. Install carefully the optical plates to protect the boards.
8. Driver insulation: Basic according to IEC 61847-1.

ELECTRICAL CHARACTERISTICS

 |

PSD 35W

|

SIA 35W

|

PSU 50W

|

PSU 60W

|

PSD 60W

|

SIA 60W

|

PSU 75W

|

PSU 90W

|

PSD 90W

|

SIA 100W

---|---|---|---|---|---|---|---|---|---|---
ELECTRICAL CHARACTERISTICS| DRIVER| TYPE|

WT475C 42S (PSD)

|

WT475C 42S (SIA)

|

WT475C 42S (PSU)

|

WT475C 72S (PSU)

|

WT475C 62S, 72S (PSD)

|

WT475, 62S, 72S (SIA)

| WT475C 42S, 62S, 72S (PSU)|

WT475C 107S (PSU)

|

WT475C 107S (PSD)

|

WT475C 107S (SIA)

Leak current [mA rms]| 0,5| 0,5| 0,7| 0,7| 0,5| 0,5| 0,3| 0,7| 0,5| 0,5
Imax [A]| 23,1| 21,0| 20,2| 22,4| 25,1| 21,0| 19,0| 21,0| 25,0| 4,5
Tref [μs]| 221| 280| 278| 326| 214| 280| 280| 316| 230| 1000
MCB- 16A| 22| 21| 41| 34| 21| 21| 24| 19| 20| 18
CABLE| Section [mm 2]| 1.5mm2 / TI3 [EN 50525-1]
No of Luminaires per MCB| B- 6A| 8| 8| 16| 13| 8| 8| 9| 7| 8| 7
B- 10A| 13| 13| 25| 21| 13| 13| 15| 11| 12| 11
C-10A| 22| 21| 42| 35| 21| 21| 24| 19| 20| 18
B- 13A| 17| 17| 33| 27| 17| 17| 19| 15| 16| 14
C-13A| 29| 28| 55| 45| 28| 28| 32| 25| 27| 24
B- 16A| 22| 21| 41| 34| 21| 21| 24| 19| 20| 18
C-16A| 37| 35| 59| 51| 35| 35| 36| 32| 34| 29

Disconnect before servicing

• Luminaire has basic insulation between Low Voltage supply and control conductors.
• The light source and/or control gear and/or the external flexible cable contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person.
• Storage, installation, use, operation and maintenance of the products needs to be performed exactly according the instructions in this manual and/or other instructions as may be provided by us to guarantee safe use of the product over its entire lifetime. Failure to adhere to these instructions will invalidate your entitlement to warranty. Bolts with indication of torque strength on the drawing need to be tightened using a calibrated torque wrench. Pre-assembled bolts need to be retightened again to the required torque specification to assure maximum strength over lifetime.
• This product contains a light source of energy efficiency class: see table or label.

INFO

Printed in Poland
Data subject to change without notice
Keep for future reference: www.philips.com/lighting

© 11/2022, Signify Holding All rights reserved

References

• Sustainable LED lighting solutions | Philips lighting

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>