RONSTAN 40QT Orbit Winch Mounting Template Instruction Manual
- June 12, 2024
- RONSTAN
Table of Contents
RONSTAN 40QT Orbit Winch Mounting Template
Product Information
The ORBIT WINCHTM is a winch mounting template designed for the 40QT model. It is compatible with the RA6402 winch model. The template provides precise mounting dimensions and includes information on the required fasteners.
- Winch Model: RA6402
- Scale: 1:1
- Page Size: A4
- Fasteners: 5 x M6 or 1/4 stainless steel hex socket cylinder head screws, Grade A4-70
Base Plate Dimensions:
- Width: 136mm (5 6/16)
- Hole Count: 5 holes
- Hole Diameter: 6.50mm (9/32)
- Length: 114mm (4 1/2)
Additional Information:
The self-tailer arm can be fitted in 8 positions, providing flexibility in line handling. The line entry point is compatible with the design.
Manufacturer Website:www.ronstan.com
Product Usage Instructions
-
Ensure that the ORBIT WINCHTM MOUNTING TEMPLATE document is printed at a 1:1 scale. Check that the printed/reproduced copies match the dimensions indicated at the 1:1 scale before proceeding.
-
Obtain the required fasteners: 5 x M6 or 1/4 stainless steel hex socket cylinder head screws, Grade A4-70.
-
Position the base plate according to the provided dimensions.
The width should be 136mm (5 6/16) and the length should be 114mm (4 1/2). -
Secure the base plate using the 5 holes. Insert the fasteners (screws) through the holes and tighten them securely.
-
If applicable, select one of the 8 positions for fitting the self-tailer arm.
-
Ensure the line entry point is aligned with the design for proper line handling.
-
For further information or assistance, visit the manufacturer’s website at www.ronstan.com.
Mounting Dimensions
40QT Mounting Dimensions Template
| Winch Model | RA6402 |
|---|---|
| Scale | 1:1 |
| Page size | A4 |
| Fasteners | 5 x M6 or 1/4” stainless steel hex socket cylinder head |
screws, Grade A4-70
IMPORTANT
- This template document has been created at 1:1 scale. It is critical that it is printed at 1:1 scale.
- Check any printed/reproduced copies match the dimensions indicated at 1:1 scale prior to use.
- The self-tailer arm can be fitted in 8 positions.
- www.ronstan.com
Documents / Resources
|
RONSTAN 40QT Orbit Winch Mounting
Template
[pdf] Instruction Manual
RA6402, 40QT Orbit Winch Mounting Template, 40QT Orbit Winch, Orbit Winch,
40QT Winch, Winch, Orbit Winch Mounting Template
---|---
References
- Ronstan Sailboat Hardware | Ronstan Sailboat Hardware
- Ronstan International – Sailboat Hardware, Architectural Services, Industrial Hardware, Andersen Winches and Rigging Components