acer HLZM3 Enduro M3 5G Mobile Wi-Fi User Guide

June 13, 2024
Acer

acer HLZM3 Enduro M3 5G Mobile Wi-Fi

acer -HLZM3 -Enduro -M3 -5G -Mobile -Wi-Fi -PRODUCT
IMAGE

acer -HLZM3 -Enduro -M3 -5G -Mobile -Wi-Fi -FIG \(1\)

  1. Turn M3 to the back, locate SIM door coveracer -HLZM3 -Enduro -M3 -5G -Mobile -Wi-Fi -FIG \(2\)

  2. Use SIM tool

  3. Eject SIM tray

  4. The operator logo facing upacer -HLZM3 -Enduro -M3 -5G -Mobile -Wi-Fi -FIG \(5\)

  5. Reinstall the tray with nano SIMacer -HLZM3 -Enduro -M3 -5G -Mobile -Wi-Fi -FIG \(6\)

  6. Turn on deviceacer -HLZM3 -Enduro -M3 -5G -Mobile -Wi-Fi -FIG \(7\)

  7. Follow on screen instructions

  8. Turn on device acer -HLZM3 -Enduro -M3 -5G -Mobile -Wi-Fi -FIG \(9\)

  9. Follow on screen instructions acer -HLZM3 -Enduro -M3 -5G -Mobile -Wi-Fi -FIG \(10\)

Connect Type C cable to charge device

Warranty

Acer warrants any Acer product, including genuine Acer parts and components (offered as “Options” and/or “Accessories” ) which have been installed in your Acer product at the time of purchase:

  • Carry In Service (Customer returns defective product to nearest Acer center)
  • Consumable Parts (batteries): 6 months warranty
  • Accessories (Adapters, headsets, mice, Keyboards, docking stations, stylus pens, dongles and cables, .): 24 months warranty
  • Cast Master Tx: 36 months warranty
  • Halo Smart Speaker: 12 months warranty
  • Acer / Predator Connect: 12 months warranty

Acer terms & conditions apply. For more information please visit our website or contact an Acer call center. This Limited Warranty does not limit any more expansive rights you may have by applicable law. Consumers have legal rights under applicable legislation governing the sale of consumer goods and this Limited Warranty does not exclude, limit or suspend any such applicable rights.

Acer contacts

AT 0900340121 0,88€/Min. www.acer.at
BE 078150023 www.acer.be

Warranty Card

acer -HLZM3 -Enduro -M3 -5G -Mobile -Wi-Fi -FIG \(11\)

To ensure your rights:

  • You can enjoy your warranty services during the designed period with your warranty card.
  • Please read the instructions on the back carefully, and keep this warranty card properly. It will not be reissued if lost.

Acer Malaysia Warranty Instructions

  1. Description of Warranty Period:

  2. This warranty card is only applicable to the after-sales service of products sold by Acer. Products that are sold without authorization Acer are not covered by the warranty card service.

  3.  Acer Connect / Predator Connect comes with One-year warranty. Based on date on invoice or warranty card. (based on date as stated on invoice or warranty card).

  4. In the event there Is a need For after-sales service after the expiry of expiry of the one-year warranty provided by Acer, Acer shall charge all related expenses which shall include but not limited to costs of logistics, transportation, labour charges and replacement parts.

  5. The information in each field of this warranty card must be filled and stamped with the distributer’s seal for the warranty to be valid. IF the purchase date and S/N number are altered, ambiguous, or the information is incorrectly filled, this warranty is deemed invalid.

  6. If you have any questions about after-sales service provided by Acer, please contact toll free no 1800 88 1918 or email to ama.acercare@acer.com. Please send any device which need to be repaired them to the nearest service centre authorized by Acer.

  7. The Product will not be eligible for free aner-sales service as per the warranty if:

  8. The Product has exceeded the warranty period provided by Acer or the warranty card is not presented or is damaged.

  9. The Product is damaged by sulfur or caused by coastal environments.

  10. The Product is damaged as a result of connections to irregular voltage source.

  11. There is improper use, modification or disassembly of the Product without following the operating instructions or machine specifications. In such event, the warranty shall be invalid and Acer shall not assume any legal responsibility.

  12. The Product is damaged or malfunctioned due to natural disasters (including but not limited to Rood, earthquake, typhoon, lightning strike, infestation by insects or vermin etc), external damages (including but not limited to scratches, hammered, water seepage into products etc).

  13. The Product is damaged due to exposure to sunlight, high temperature environments or various humid environments

  14.  There is failure to the Product caused by the use of non-original parts, consumables, equipment and accessories

  15. There is damage caused by dropping of the products, or reasonable wear and tear from usage causing
    scratches or damage to the Product’s appearance.

  16. The Product is damaged by the insertion of hard or sharp objects, such as glass, nails, screws, coins, etc.
    into the Product, whether on purpose or inadvertently.

  17. Cosmetic damage to the Product’s appearance, accessories or usage wear and tear, etc.

  18. The Product is not sold by Acer.

  19. The Customer cannot provide the warranty card/invoice/proof of purchase.

  20. This warranty is only limited to the Product itself. If there is additional service required such as delivery or installation of accessories, etc., Acer reserves the right to reject the claim or additional service fees or material costs will be charged as may be applicable.

  21. In the event the customer requests for a new replacement parts when the existing parts are still usable, the customer shall pay for the costs of such new replacement parts in accordance to Acer’s price list of the same.

  22. Acer reserves the right to use either new or factory reprocessed parts for product maintenance or repair.

  23. Please keep this warranty card properly as it will not be reissued in the event it is lost or damaged.

  24. In the event there is any changes or additional terms to the above listed, Acer shall issue a notice of such changes on its website (www.acer.com) and any changes b Acer shall be final.

Acer India Warranty Instructions

  1. Description of Warranty Period:
  2. This warranty card is only applicable to the after-sales service of products sold by our company. The products a care not authorized by our company are no covered by the warranty card service.
  3.  Acer connect Predator connect are provided with a one-year warranty service with this warranty from the date of purchase on the invoice or warranty
  4.  After the product has exceeded the one-year free warranty period provided by the company, if there is a need for after-sales service, the company will charge related expenses at its discretion, including logistics, outing, wages and replacement parts.
  5. The information in each field of this warranty must be filled in and stamped with the distributer’s seal to be valid. If the purchase date and S/N number are altered, ambiguous, or the information is incorrectly filled, this warranty is deemed invalid.
  6. If you have any questions about after-sales service, please contact toll free no 1800-116-677 or email to ail.easycare@acer.com. IF device need to be repaired, please senc them to the nearest service station authorized by our company.
  7. Under the following conditions. this product will not be able to provide free services:
  8. The product has exceeded the warranty period provided by the company.
  9. Damage caused by sulfur and coastal environment
  10. Damage caused by inconsistent voltage specifications.
  11. For improper use, modification or disassembly without following the operating instructions or machine specifications, our company does not warranty and assumes no legal responsibility.
  12. Damage or malfunction caused by natural disasters, electric shocks, insect (rat) damage, pets, etc.
  13. Damage due to exposure to sunlight, high temperature environment or various humid environments.
  14. Failure caused by the use of non-original parts, consumables, other products, equipment and accessories.
  15. Damage caused by falling due to the height difference of the ground environment, and scratches or damage to the appearance caused by collision during operation.
  16. The product is damaged by inputting/inhaling hard or sharp objects, such as glass, nails, screws, coins, etc.
  17. Appearance, accessories, etc.
  18. Products not sold by our company.
  19. Those who cannot show the warranty card/invoice/proof of purchase.
  20. This warranty is only limited to the machine itself. IF there are additional services such as delivery or installation of accessories, etc., it will be rejected or additional material service fees will be charged as the case may be.
  21. The parts are still usable, but if the customer requests a new one, the parts fee will be charged according to the price list of our company.
  22. The company can use new or factory reprocessed parts for product maintenance.
  23. Please keep this warranty card properly and it will not be reissued.
  24. The above listed items and important items in the product manual, if there is any change or supplementary description, will be subject to the latest announcement of the company website (www.acer.com).

Acer Singapore Warranty Instructions

  1. Description of Warranty Period:

  2. This warranty is only applicable to the after-sales service of products sold by our company. The products that are not authorized by our company are not covered by the warranty card service.

  3. Acer Connect / Predator Connect are provided with a one-year warranty service with this warranty from the date of purchase on the invoice or warranty.

  4. After the product has exceeded the one-year free warranty period provided by the company, if there is a need for after-sales service, the company will charge related expenses at its discretion, including logistics, outing, wages and replacement parts.

  5. If you have any questions about after-sales service, please contact toll free no 1800-895-6299 or email to acercare.sg@acer.com. IF device need to be repaired, please send them to Acer service center.

  6. Under the following conditions, this product will not be able to provide free services:

  7. The product has exceeded the warranty period provided by the company.

  8. Damage caused by sulfur and coastal environment.

  9. Damage caused by inconsistent voltage specifications.

  10. For improper use, modification or disassembly without following the operating instructions or machine specifications, our company does not warranty and assumes no legal responsibility.

  11. Damage or malfunction caused by natural disasters, electric shocks, insect (rat) damage,
    pets, etc.

  12. Damage due to exposure to sunlight, high temperature environment or various humid environments.

  13. Failure caused by the use of non-original parts, consumables, other products, equipment and accessories.

  14. Damage caused by falling due to the height difference of the ground environment, and scratches or damage to the appearance caused by collision during operation.

  15. The product is damaged by inputting/inhaling hard or sharp objects, such as glass, nails, screws, coins, etc.

  16. Appearance, accessories, etc.

  17. Products not sold by our company.

  18. Those who cannot show the invoice or proof of purchase.

  19. This warranty is only limited to the machine itself. If there are additional services such as delivery or installation of accessories, etc., it will be reiected or additional material service fees will be charged as the case may be.

  20. If the parts are still usable, and customer requests a new one, the parts fee will be charged according to the price list of our company.

  21. The company can use new or factory reprocessed parts for product maintenance.

  22. The above listed items and important items in the product manual, if there is any change or supplementary description, will be subject to the latest announcement of the company website (www.acer.com).

Safety Information

Important Safety Precaution
Your Acer Connect Enduro M3 Mobile Wi-Fi device is manufactured to comply with European safety standards. This section outlines the safety precautions associated with using the device. Please read the safety and operation instructions before using your device and other accessories. Keep these instructions safe for future reference.

Condition of Use
The device is not water-resistant. Please protect the device from water or moisture and do not touch the device with wet hands. Otherwise short-circuit and malfunction of the product or electric shock may occur. Keep the device and accessories in a cool, well-ventilated area and away from direct sunlight. Do not place the device in a container with poor heat dissipation. Do not enclose or cover your device with clothes, towels, or other objects. Put your device in places beyond the reach of children. Do not allow children to use the wireless device without guidance. Do not use your device at places for medical treatment (in an operating room, intensive care unit, coronary care unit, etc.) where wireless device use is prohibited. To reduce the risk of accidents, do not use your device while driving. RF signals may affect the electronic systems of motor vehicles. For more information, consult the vehicle manufacturer. EE recommends using the charger supplied with your device. The use of another type of charger may result in malfunction and/or danger.

Cleaning and Maintenance
Do not attempt to dry your device with an external heat source, such as a microwave oven or hair dryer. Use a clean, soft, and dry cloth to clean the device and accessories.

Disposal Instructions
Do not throw this electronic device into the trash when discarding. To minimize pollution and ensure the utmost protection of the global environment, please recycle. For more information on the Waste from Electrical and Electronics Equipment (WEEE) regulations, visit www.acer- group.com/public/Sustainability

Ethernet Cable Line Safety
Disconnect all Ethernet cable lines from the equipment when not in use and/or before servicing. To avoid the remote risk of electric shock from lightning, do not connect the Ethernet cable line to this equipment during lightning or thunderstorms.

Medical Devices
The operation of any radio transmitting equipment, including wireless phones, may interfere with the functionality of inadequately protected medical devices. Consult a physician or the manufacturer of the medical device to determine if they are adequately shielded from external RF energy or if you have any questions. Switch off your device in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF transmissions. Pacemakers. Pacemaker manufacturers recommend that a minimum separation of 15.3 centimeters (6 inches) be maintained between wireless devices and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with the independent research and recommendations of Wireless Technology Research. Persons with pacemakers should do the following: Always keep the device more than 15.3 centimeters (6 inches) from the pacemaker Do not carry the device near your pacemaker when the device is switched on. If you suspect interference, switch off your device, and move it. Hearing aids. Some digital wireless devices may interfere with some hearing aids. If interference occurs, consult your service provider.

Vehicles
RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles such as electronic fuel injection systems, electronic antiskid (anti-lock) braking systems, electronic speed control systems, and airbag systems. For more information, check with the manufacturer, or its representative, ofyour vehicle or any equipment that has been added. Only qualified personnel should service the device, or install the device in a vehicle. Faulty installation or service may
be dangerous and may invalidate any warranty that may apply to the device. Check regularly that all wireless equipment in your vehicle is mounted and operating properly. Do not store or carry flammable liquids, gases, or explosive materials in the same compartment as the device, its parts, or enhancements. For vehicles equipped with an airbag, remember that airbags inflate with great force. Do not place objects, including installed or portable wireless equipment in the area over the airbag or in the airbag deployment area. If in-vehicle wireless equipment is improperly installed, and the airbag inflates, serious injury could result. Using your device while flying in aircraft is prohibited. Switch off your device before boarding an aircraft. The use of wireless devices in an aircraft may be dangerous to the operation of the aircraft, disrupt the wireless telephone network, and may be illegal.

Warning
Do not attempt to open the device by yourself. Disassembling may result in damage to the device. Small parts may also present a choking hazard. When this device is switched on, it should be kept at least 15 cm from any medical device such as a pacemaker, a hearing aid or insulin pump, etc. Switch this device off when you are near gas or flammable liquids. Strictly obey all signs and instructions posted in any potentially explosive atmosphere.

Explosive Device Proximity Warning

Switch off your device when in any area with a potentially explosive atmosphere and obey all signs and instructions. Potentially explosive atmospheres include areas where you would normally be advised to turn off your vehicle’s engine. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death. Switch off the device at refueling points such as near gas pumps at service stations. Observe restrictions on the use of radio equipment in fuel depots, storage, and distribution areas; chemical plants; or where blasting operations are in progress. Areas with a potentially explosive atmosphere are often, but not always, clearly marked. They include below deck on boats, chemical transfer or storage facilities, vehicles using liquefied petroleum gas (such as propane or butane), and areas where the air contains chemicals or particles such as grain, dust, or metal powders. Do not switch the notebook on when wireless phone use is prohibited or when it may cause interference or danger.
Warning: Do not operate a portable transmitter (including this wireless adapter device) near unshielded blasting caps or in an explosive environment unless the transmitter has been modified to qualify for such use.
Warning: The wireless adapter is not designed for use with high-gain directional antennas

Wireless adapter regulatory information
Warning: For safety reasons, turn off all wireless or radio transmitting devices when using your device under the following conditions.
Remember to follow any special regulations in force in any area, and always switch off your device when its use is prohibited or when it may cause interference or danger. Use the device only in its normal operating positions. This device meets RF exposure guidelines when used normally. To successfully transmit data files or messages, this device requires a good quality connection to the network. In some cases, the transmission of data files or messages may be delayed until such a connection is available. Parts of the device are magnetic. Metallic materials may be attracted to the device, and persons with hearing aids should not hold the device to their ears with the hearing aid. Do not place credit cards or other magnetic storage media near the device, because information stored on them may be erased.

Aircraft
Warning FCC and FAA regulations may prohibit airborne operation of radio- frequency wireless devices (wireless adapters) because their signals could interfere with critical aircraft instruments. Ask the airport staff and cabin crew before turning on your device’s wireless adapter whilst board.

The wireless adapter and your health
The wireless adapter, like other radio devices, emits radio frequency electromagnetic energy. The level of energy emitted by the wireless adapter, however, is less than the electromagnetic energy emitted by other wireless devices such as mobile phones. The wireless adapter operates within the guidelines found in radio frequency safety standards and recommendations. These standards and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature. In some situations or environments, the use of the wireless adapter may be restricted by the proprietor of the building or responsible representatives of the applicable organization. Examples of such situations may include:

  • Using the wireless adapter on board airplanes, or
  • Using the wireless adapter in any other environment where the risk of interference with other devices or services is perceived or identified as being harmful.

If you are uncertain of the policy that applies to the use of wireless adapters in a specific organization or environment (an airport, for example), you are encouraged to ask for authorization to use the adapter before you turn it on.

EU/UK Regulatory Conformance

List of applicable countries
This product must be used in strict accordance with the regulations and constraints in the country of use. For further information, contact the local office in the country of use. Please see https://europa.eu/european-union /about-eu/countries_en for the latest country list.
Specific absorption rate information
This device meets the EU/UK requirements on the limitation of exposure of the general public to electromagnetic fields by way of health protection. The limits are part of extensive recommendations for the protection of the general public. These recommendations have been developed and checked by independent scientific organizations through regular and thorough evaluations of scientific studies. The unit of measurement for the European Council’s /UK recommended limit for mobile devices is the “Specific Absorption Rate” (SAR), the device complies with RF specifications when the device used at a distance of 5 mm from your body. The SAR limit for mobile devices is 2.0 W/Kg (Body- worn), 4.0 W/Kg (Limbs) and the highest SAR value for this device when tested for use at the body-worn was 1.332W/kg and when tested for use at the limbs was 2.955W/kg. This device was tested for typical body-worn operations with the back of the device kept 0.5cm from the body. It meets the requirements of the International Commission on Non-lionizing Radiation Protection (ICNIRP). For body-worn operation, this device has been tested and meets the ICNIRP exposure guidelines and the European/UK Standard, for use with dedicated accessories. The use of other accessories which contain metals may not ensure compliance with ICNIRP exposure guidelines.
Hereby, Acer Incorporated. declares that the radio equipment type M3 complies with Directive 2014/53/EU and RER 2017 (SI 2017/1206). The full text of the EU and UK declaration of conformity is available: Please search for Acer Connect M3 Mobile Wi-Fi at www.acer.com

Duty Cycle Attestation
5G MiFi UE (User Equipment) will operate on its 5G network with a configuration of 1:1 DL: UL ratio, i.e. The highest uplink duty cycle is 50% for the NR n78 band for the lifetime of this device.

Restrictions
Operations in the 5.15-5.25 GHz band is restricted to indoor usage only.

EU/UK Regulatory Conformance

4G Operation Frequency(MHz) conductive power( dBm)
Up link Downlink
B1 1920 – 1980 2110 – 2170
B3 1710 – 1785 1805 – 1880
B7 2500 – 2570 2620 – 2690
B8 880 – 915 925 – 960
B20 832 – 862 791 – 821
B28 703 – 748 758 – 803
B38 2570 – 2620 23
B40 2300 – 2400 23
B42 3400 – 3600 23
5G Operation Frequency(MHz) conductive power( dBm)
Up link Downlink
n1 1920 – 1980 2110 – 2170
n3 1710 – 1785 1805 – 1880
n7 2500 – 2570 2620 – 2690
n8 880 – 915 925 – 960
n20 832 – 862 791 – 821
n28 703 – 748 758 – 803
n38 2570 – 2620 24
n40 2300 – 2400 24
n41 2496 – 2690 24
n77 3300 – 4200 24
n78 3300 – 3800 24
Bands Operation Frequency Max.Power
--- --- ---
**** Wi-Fi 2.4GHz 2412-2472MHz
5GHz 5180-5240MHz EIRP 22.76 dBm
5745-5825MHz EIRP 13.96 dBm

Additional Safety Instructions

Safety Instructions
Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks. Refer all servicing to qualified service personnel. Unplug this product from the wall outlet and refer servicing to qualified service personnel when:

  • The power cord or plug is damaged, cut, or frayed.
  • Liquid was spilled into the product.
  • The product was exposed to rain or water.
  • The product has been dropped or the case has been damaged.
  • The product exhibits a distinct change in performance, indicating a need for service.
  • The product does not operate normally after following the operating instructions.
  • The product exhibits a distinct change in performance, indicating a need for service.
  • The product does not operate normally after following the operating instructions
  • When unplugging the power cord, do not pull on the cord itself but pull on the plug.
  • This product should be operated from the type of power indicated on the marking label.

Battery Information
Batteries may explode if not handled properly. Do not disassemble or dispose of them in the fire. Do not tamper with batteries. Keep them away from children. Follow local regulations when disposing of used batteries. This device uses a Lithium battery. Do not use it in a humid, wet, or corrosive environment. Do not put, store, or leave your product in or near a heat source, in a high-temperature location, in strong direct sunlight, in a microwave oven, or a pressurized container, and do not expose it to temperatures over 60° C (140° F). Failure to follow these guidelines may cause the battery to leak acid, become hot, explode or ignite and cause injury and/or damage. Do not pierce, open or disassemble the battery. If the battery leaks and you come into contact with the leaked fluids, rinse thoroughly with water and seek medical attention immediately. For safety reasons, and to prolong the lifetime of the battery, charging will not occur at temperatures below 0° C (32° F) or above 45° C (113° F). The full performance of a new battery is achieved only after two or three complete charge and discharge cycles. The battery can be charged and discharged hundreds of times. but it will eventually wear out. When the operation time becomes noticeably shorter than normal, buy a new battery. Use only the approved batteries, and recharge your battery only with the approved chargers designated for this device. Never use any charger or battery that is damaged.
Do not short-circuit the battery. Accidental short-circuiting can occur when a metallic object such as a coin, clip, or pen causes a direct connection between the positive (+ and negative (-)terminals of the battery. (These look like metal strips on the battery.)

Replacing the battery
Improper replacement or mishandling could damage the battery, cause Overheating, result in injury, or cause a risk of fire or explosion. Please check the user manual for the product information

The device with built-in Battery
The built-in battery must be replaced by an authorized service center. Do not attempt to replace or remove the battery by yourself. Note: Please refer to www.acer.com for battery shipping documents.

USA – FCC amd FAA

FCC statements:
This device complies with part 15 of the FCC rules.

Operation is subject to the following two conditions:

  1. this device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or changes to this equipment. Such modifications or changes could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types M3(FCC ID: HLZM3) has also been tested against this SAR limit. For body worn operation, this product has been tested and meets the FCC RF exposure guidelines for use with an accessory that contains no metal and positions the product a minimum of 10 mm from the body. Use of other enhancements may not ensure compliance with FCC RF exposure guidelines. The device for operation in the band 5150-5250MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems.

IC statements:
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions:

  1. this device may not cause interference, and
  2. this device must accept any interference, including interference that may cause undesired operation of the device.

This Class B digital apparatus complies with Canadian ICES-003.
This device has been tested for compliance with IC SAR values at a typical operating near the body. To ensure that RF exposure levels below the levels tested, use accessories with this equipment to maintain a minimum separation distance of 10 mm between the body of the user and the device. These accessories should not contain metallic components. It is possible that the accessories used close to the body that do not meet these requirements are not consistent with the SAR limits and it is advisable to avoid using them. The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems.

European Union
This product must be used in strict accordance with the regulations and constraints in the country of use. For further information, contact the local office in the country of use. Please see https://europa.eu/european-union /about-eu/countries en for the latest country list. This equipment complies with the essential requirements of the European Union directive 2014/53/EU. See Statements of European Union Compliance, and for more details refer to the attached Declaration of Conformity. Restriction or Requirement in the UK: 5150 to 5250 MHz indoor-use only.

EU RF Radiation Exposure Statement: (SAR)
This device meets the EU requirements on the limitation of exposure of the general public to electromagnetic fields by way of health protection. The limits are part of extensive recommendations for the protection of the general public. These recommendations have been developed and checked by independent scientific organizations through regular and thorough evaluations of scientific studies. The unit of measurement for the European Council’s recommended limit for mobile devices is the “Specific Absorption Rate” (SAR), and the SAR limit is 2.0 W/kg averaging over 10 grams of body tissue. It meets the requirements of the International Commission on Non-lonizing Radiation Protection (ICNIRP). For body-worn operation, this device has been tested and meets the ICNIRP exposure guidelines and the European Standard, for use with dedicated accessories. Use of other accessories which contain metals may not ensure compliance with ICNIRP exposure guidelines. The low band 5.15 to 5.25 GHz is for indoor use only. Compliant with Russian regulatory certification

UKCA DECLARATION OF CONFORMITY

We,
Ácer Incorporated
8F, 88, Sec. 1, Xintai 5th Rd., Xizhi,
New Taipei City 221
Contact Person: Mr. RU Ian,e-mail:RU.Jan@acer.com
Acer UK Ltd.
Heathrow Blvd.III 282 Bath Rd. W. Drayton UB7 0DQ
Tel: 0371-760-1005Fax: 0371-760-1005
Product: 5G Mobile Hotspot
Trade Name: acer M3
Model Number: Acer Connect M3**
SKU Number: (* is “0-9” “a-z” “A-Z” “_” or blank)
We, Acer Incorporated, hereby declare under our sole responsibility that the product described above is in conformity with the relevant Union harmonization legislation as below regulation and the following harmonized standards and/or other relevant standards have been applied:
Electromagnetic compatibility Regulation 2016
BS EN55032:2015+A11:2020
draft EN301489-3 V2.3.0
BS EN61000-3-2:2014
BS EN55035:2017+A11:2020
draft EN301489-17 V3.2.5
BS EN61000-3-3:2013
EN301489-1 V2.2.3
EN301489-52 V1.2.1
Radio Eqipment Regulation 2017
EN300328 V2.2.2
FN301908.1 V15.
EN300440 V2.2.1
EN301908-13 V13.2.1
EN301893 V2.1.1
Electrical Equipment (Safety) Regulation 2016
BS EN IEC 62368-1:2020+A11:2020
EN62200.2:2010÷41•2019
EN50566:2017
EN50663:2017
RoHS in Electrical and Electronic Equipment Regulations 2012
EN IEC63000:2018
SW: ASW2106_UN_1201_T0054, max. body SAR 1.332W/Kg at 5mm, max. limb SAR 2.955W/Kg at 0mm
NB: 0560 Teleficaton, License Nr: 222140489/AA/00 & 0558 KIWA, License Nr. 222340187/AA/00
Year to begin affixing UKCA marking:2022
RU Jan, Sr. Manager@New Taipei City 2022-10-25
Note: Open the Start Menu and search for ‘Acer Documents’ for help with setting up a network connection, using the touchpad, and other information which is important for your health and safety.

EC/EU DECLARATION OF CONFORMITY

We,
Acer Incorporated
8F, 88, Sec. 1, Xintai 5th Rd., Xizhi, New Taipei City 221
Contact Person: Mr. RU Jan,e-mail:ru.jan@acer.com
Acer Italy s.r.I.
Viale delle Industrie 1/A. 20044 Arese (MI). Ital
Tel: +39-02-939-921Fax: +39-02-9399-2913
Product: 5G Mobile Hotspot
Trade Name: acer
Model Number: M3
SKU Number: Acer Connect M3** (* is “O-9”, “a-z” “A-Z”, “_”, or blank)
We, Acer Incorporated, hereby declare under our sole responsibility that the product described above is in conformity with the relevant Union harmonization legislation: Directive 2014/53/EU on Radio Equipment. The following harmonized standards and/or other relevant standards have been applied:
3.1(b) Electromagnetic compatibility
EN55032:2015+A11:2020
draft EN301489-3 V2.3.0
EN61000-3-2:2014
EN55035:2017+A11:2020
draft EN301489-17 V3.2.5
EN61000-3-3:2013
EN301489-1 V2.2.3
EN301489-52 V1.2.1
3.2 Radio frequency spectrum usage
EN300328 V2.2.2
EN301908-1 V15.1.1
EN300440 V2.2.1
EN301908-13 V13.2.1
EN301893 V2.1.1
3.1(a) Healthy and Safety
EN IC 62368-1:2020+A11:2020
EN62209-2:2010+A1:2019
EN50566:2017
EN50663:2017
RoHS (Directive 2011/65/EU)
EN IEC63000:2018
SW: ASW2106_UN_1201_T0054, max. body SAR 1.332W/Kg at 5mm, max. limb SAR 2.955W/Kg at 0mm
NB: 0560 Teleficaton, License Nr: 222140489/AA/00 & 0558 KIWA, License Nr. 222340187/AA/00 RU
Year to begin affixing CE marking: 2022
RU Jan, Sr.Manager@New Taipei City 2022-10-25
Note: Open the Start Menu and search for ‘Acer Documents’ for help with setting up a network connection, using the touchpad, and other information which is important for your health and safety.

UKCA DECLARATION OF CONFORMITY
We,
Acer Incorporated
8F, 88, Sec. 1, Xintai 5th Rd., Xizhi, New Taipei City 221
Acer UK Ltd.
Heathrow Blvd.IlI 282 Bath Rd. W. Drayton UB7 0DQ
Tel: 0371-760-1005Fax: 0371-760-1005
Contact Person: Mr. RU Jan,e-mail:RU.Jan@acer.com
Product: 5G Mobile Hotspot
Trade Name: acer
Model Number: M3
SKU Number : Acer Connect M3** (* is “0-9”, “a-z”, “A-Z” “”, or blank)
We, Acer Incorporated, hereby declare under our sole responsibility that the product described above is in conformity with the relevant Union harmonization legislation as below regulation and the following harmonized standards and/or other relevant standards have been applied:
Electromagnetic compatibility Regulation 2016
BS EN55032:2015+A11:2020
draft EN301489-3 V2.3.0
BS EN61000-3-2:2014
BS EN55035:2017+A11:2020
draft EN301489-17 V3.2.5
BS EN61000-3-3:2013
EN301489-1 V2.2.3
EN301489-52 V1.2.1
Radio Egipment Regulation 2017
EN300328 V2.2.2
EN301908-1 V15.1.1
EN300440 V2.2.1
EN301908-13 V13.2.1
EN301893 V2.1.1
Electrical Equipment (Safety) Regulation 2016
BS EN IEC 62368-1:2020+A11:2020
EN62209-2:2010+A1:2019
EN50566:2017
EN50663:2017
RoHS in Electrical and Electronic Equipment Regulations 2012
EN IEC63000:2018
SW: ASW2106_UN_1201_T0054, max. body SAR 1.332W/Kg at 5mm, max. limb SAR 2.955W/Kg at 0mm
NB: 0560 Teleficaton, License Nr: 222140489/AA/00 & 0558 KIWA, License Nr. 222340187/A/00
Year to begin affixing UKCA marking: 2022
RU Jan, Sr. Manager@New Taipei City 2022-10-25
Note: Open the Start Menu and search for ‘Acer Documents’ for help with setting up a network connection, using the touchpad, and other information which is important for your health and safety.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals