Valcom ‎V-9010 Surface Mount Vandal Resistant Speaker Installation Instruction

: June 12, 2024
: Valcom

Table of Contents

Valcom ‎V-9010 Surface Mount Vandal Resistant Speaker
SPECIFICATIONS
CONNECTIONS
MOUNTING
TROUBLESHOOTING CHART
TECHNICAL ASSISTANCE
FEATURES
FREQUENTLY ASKED QUESTIONS
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Valcom ‎V-9010 Surface Mount Vandal Resistant Speaker

Valcom ‎V-9010-W Surface Mount Vandal Resistant Speaker-
product

VALCOM VANDAL RESISTANT SPEAKER

The Valcom Surface Mount Vandal Resistant Speaker, V-9010, was designed to be used in harsh environments. The speaker assembly features a steel housing, a built-in amplifier and an interior security screen with tamper resistant screws.
The steel housing is constructed of 18-gauge steel finished with a baked on powder coat urethane finish. The screen is made of 24-gauge steel to prevent sharp object from penetrating the speakers.

SPECIFICATIONS

Amplifier

Power Rating: 1 Watt
Operating Voltage: -24VDC
Current Consumption: 50mA

Speaker

Voice Coil
Impedance: 45 Ohms
Diameter: 5.10″
Magnet Weight: 10 oz.
Magnet Material: Ceramic

Speaker/Amplifier

Frequency Response: 350Hz to 6.5kHz
Output Power: 1 Watt
SPL: 94dB at 1 Watt, 1 Meter

CONNECTIONS

NOTE: The V-9010 may be used to expand a constant voltage (25/70/100 Volt) paging system without placing an additional load on the amplifier by adding a V-1095, 70V Paging Expander. A power supply will also be required.

MOUNTING

After making connections to the speaker, secure the enclosure assembly to the base with four #10 stainless steel hex button head machine screws using a standard 1/8 inch hex driver.

The base of the V-9010 will mount to a standard 4-inch square or octagon- shaped electrical box or may be fastened to a wall or ceiling using screws as large as 1/4 inch. Surface wiring or conduit is routed through one of four standard knockouts.

DIMENSIONS/WEIGHT

8.50″ Dia. x 5.10″ D (21.59cm Dia. x 12.95cm D)
4.8 lbs. (2.18 kg)

TROUBLESHOOTING CHART

*SYMPTOM*	*ACTION*
1. No audio from speaker	1a. Check that volume control is turned up

(clockwise). 1b. Using a lineman’s test set, check for the proper audio level on the Tip and Ring leads and also at the

source.

2. Low volume from speaker| 2a. Check that volume control is turned up.

2b. Check voltage at the speaker assembly when in use,

-18 to -24VDC required.

2c. Using a lineman’s test set, check for proper audio level on Tip and Ring leads. It is possible that some low level audio will be heard with only one side of Tip and Ring connected.

3. Loud squeal (feedback)| 3a. Turn down (counter-clockwise) volume of the speaker.

3b. Increase the distance between the telephone and the speaker.

3c. Install a noise canceling handset on the telephone in severe problem areas.

3d. Install a V-9962, Digital Feedback Eliminator.

TECHNICAL ASSISTANCE

When trouble is reported, verify there are no broken connections to the unit. Assistance in troubleshooting is available from the factory. When calling, you should have a VOM and a lineman’s test set available and be calling from the job site. Call 540-563-2000 and press 1 for Technical Support or visit our website at http://www.valcom.com.

Valcom equipment is not field repairable. Valcom, Inc. maintains service facilities in Roanoke, VA. Should repairs be necessary, attach a tag to the unit clearly stating your company name, address, phone number, contact person and the nature of the problem. Send the unit to: Valcom, Inc. Repair and Return Dept. 5614 Hollins Road Roanoke, VA 24019-5056

WARRANTY

Warranty information may be found on our website at www.valcom.com/warranty.

FEATURES

Construction that is Resistant to Vandalism:
Because the speaker is constructed to endure tampering, vandalism, and severe weather, it is an excellent choice for use in public spaces, schools, transportation hubs, and other locations with a large volume of foot traffic.
Having a Robust Enclosure:
The speaker is encased in a housing that is both sturdy and long-lasting, which helps protect it from physical impact as well as the elements and other external variables.
Audio of the Highest Quality:
The audio quality of the V-9010 speaker is crystal clear and easily understandable, despite the speaker’s tough construction. This ensures that announcements and messages are properly communicated.
Widespread Distribution:
The design of the speaker allows for a wide dispersion pattern, which enables it to cover a larger area with sound. Because of this, the speaker is appropriate for environments in which uniform audio distribution is an important consideration.
Mounting on the surface:
Installation is made much easier thanks to the surface mount design, which also enables the speaker to be fastened to ceilings, walls, or any other surface with complete safety.
Integration Is Simple:
For uninterrupted communication and announcement capabilities, the speaker can be incorporated into pre-existing communication systems, public address systems, or intercom systems.
Utilization of Energy:
Because of the speaker’s power-efficient design, it is capable of running for longer periods of time without requiring an abnormally high amount of electricity.
Amplification that is Built-In:
There is a possibility that some models of the V-9010 speaker will come equipped with an internal amplifier. If this is the case, certain installations will no longer require the use of an external amplifier.
Rough and Tough Grille:
The speaker’s grille is built to endure knocks and manipulation, but it is also perforated so that sound may go through it without being disrupted.
Positioning That Is Flexible:
The surface-mount architecture makes it possible to install the component in a variety of locations, so it may be tailored to meet the requirements of any individual setting.
Resistance to the Elements:
It is possible that some models of the V-9010 speaker come equipped with weather-resistant features that make it suitable for usage in open-air or partially open-air environments.
Options for Controlling the Volume:
You may be able to alter the audio output of the speaker to meet the unique requirements of the environment by using the volume control options, which areavailable on certain models of the speaker but not on others.
Combination with Different Communication Systems:
The speaker has the capability of being integrated with emergency communication systems. This provides a means of conveying vital information or warnings in an audible manner.
Simple in its operation:
The robust construction and dependable design of the V-9010 speaker typically result in low maintenance requirements, which in turn reduces the frequency with which frequent replacements or repairs are required.

FREQUENTLY ASKED QUESTIONS

What is the Valcom V-9010 Surface Mount Vandal Resistant Speaker?

The Valcom V-9010 is a surface mount speaker designed to withstand vandalism and harsh environments while providing audio communication.

Where is the V-9010 speaker typically used?

This speaker is often used in outdoor or high-traffic areas where durability and resistance to tampering are important.

Is this speaker weather-resistant?

Yes, the V-9010 speaker is designed to be weather-resistant, making it suitable for outdoor use.

What is the speaker's impedance?

The impedance of the speaker determines its compatibility with amplifiers. Refer to the product specifications for this information.

Is this a full-range speaker or does it focus on specific frequencies?

The V-9010 speaker is designed to cover a range of frequencies, but the specific frequency response can vary. Check the product specifications for details.

What is the speaker's driver configuration?

The speaker might have a 2-way driver configuration, which typically includes a woofer and a tweeter.

Is the speaker designed for wall or ceiling mounting?

The V-9010 speaker is designed for surface mounting, so it can be installed on walls or ceilings.

What type of wiring is required for this speaker?

This speaker typically requires speaker wire for connection to an amplifier or audio system.

Does it come with mounting brackets or hardware?

Mounting brackets or hardware might be included. Check the packaging or manual to confirm.

Is the V-9010 speaker resistant to vandalism and tampering?

Yes, the speaker is designed to be vandal-resistant, making it suitable for environments where tampering is a concern.

What is the speaker's sensitivity?

Sensitivity measures how efficiently the speaker converts input power to sound output. Check the product specifications for sensitivity details.