Speaka PROFESSIONAL 2523571 HDMI to Analog Audio Converter Instruction Manual
- June 3, 2024
- Speaka PROFESSIONAL
Table of Contents
Operating Instructions
HDMI (eARC/ARC) to Analog Audio Converter
Item no: 2523571
www.conrad.com/downloads
Intended use
The product is an HDMI (eARC/ARC) to analog audio signal converter.
Analog outputs include:
- 3.5 mm stereo jack
- 3.5 mm stereo, dual male, 2-channel (L/R)
Power is supplied through a 5 V/DC microUSB input.
The product is intended for indoor use only. Do not use it outdoors.
Contact with moisture must be avoided under all circumstances.
If you use the product for purposes other than those described, the product may be damaged.
Improper use can result in short circuits, fires, electric shocks or other hazards.
The product complies with the statutory national and European requirements.
For safety and approval purposes, you must not rebuild and/or modify the product.
Read the operating instructions carefully and store them in a safe place. Make this product available to third parties only together with the operating instructions.
All company names and product names are trademarks of their respective owners. All rights reserved.
HDMI is a registered trademark of HDMI Licensing L.L.C.
Delivery contents
- Product
- Power adaptor
- 3.5 mm audio cable, dual male (L/R)
- Operating instructions
Latest product information
Download the latest product information at www.conrad.com/downloads or scan the QR code shown. Follow the instructions on the website.
Description of symbols
The following symbols are on the product/appliance or are used in the
text:
The symbol warns of hazards that can lead to personal injury.
**** The symbol warns of dangerous voltage that can lead to personal injury
by electric shock.
Safety instructions
**** Read the operating instructions carefully and especially observe the
safety information. If you do not follow the safety instructions and
information on proper
handling, we assume no liability for any resulting personal injury or damage
to property. Such cases will invalidate the warranty/guarantee.
5.1 General
- The product is not a toy. Keep it out of the reach of children and pets.
- Do not leave packaging material lying around carelessly. This may become dangerous playing material for children.
- If you have questions which remain unanswered by this information product, contact our technical support service or other technical personnel.
- Maintenance, modifications and repairs must only be completed by a technician or an authorised repair centre.
5.2 Handling
- Handle the product carefully. Jolts, impacts or a fall even from a low height can damage the product.
5.3 Operating environment
- Do not place the product under any mechanical stress.
- Protect the appliance from extreme temperatures, strong jolts, flammable gases, steam and solvents.
- Protect the product from high humidity and moisture.
- Protect the product from direct sunlight.
5.4 Operation
- Consult an expert when in doubt about the operation, safety or connection of the product.
- If it is no longer possible to operate the product safely, take it out of operation and protect it from any accidental use. DO NOT attempt to repair the product yourself. Safe operation can no longer be guaranteed if the product:
– is visibly damaged,
– is no longer working properly,
– has been stored for extended periods in poor ambient conditions or
– has been subjected to any serious transport-related stresses.
5.5 Connected devices
- Also observe the safety and operating instructions of any other devices which are connected to the product.
5.6 Power adapter
**** Do not modify or repair mains supply components including mains plugs,
mains cables, and power supplies. Do not use damaged components. Risk of death
by electric shock!
- Connect the appliance to a wall socket that can be accessed easily.
- As power supply, only use the supplied mains adaptor.
- Only connect the power adaptor to a normal mains socket connected to the public supply. Before plugging in the power adaptor, check whether the voltage stated on the power adaptor complies with the voltage of your electricity supplier.
- Never connect or disconnect power adaptors if your hands are wet.
- For safety reasons, disconnect the power adaptor from the mains socket during storms.
- Do not touch the power adapter if there are any signs of damage, as this may cause a fatal electric shock! Take the following steps:
– Switch off the mains voltage to the socket containing the power adapter (switch off the corresponding circuit breaker or remove the safety fuse, and then switch off the corresponding RCD protective switch).
– Unplug the power adapter from the mains socket.
– Use a new power adapter of the same design. Do not use the damaged adapter again.
Product overview
- AUX: 3.5 mm audio out
- AUDIO OUT: 3.5 mm (L/R) jack
- POWER: ON/ OFF
- DC 5V: power input
- HDMI IN: HDMI input
Connection
Important:
- Prevent audio connection noise from occurring during setup, switch all audio and video devices OFF before connection.
- Only switch the power ON after all connections are made.
The AUX and AUDIO OUT (L/R) both output at the same time.
7.1 Audio out (L/R)
7.2 3.5 mm AUX
Cleaning and care
Important:
– Do not use aggressive cleaning agents, rubbing alcohol or other chemical
solutions. They damage the housing and can cause the product to malfunction.
– Do not immerse the product in water.
- Disconnect the product from the power supply.
- Clean the product with a dry, fibre-free cloth.
Disposal
**** This symbol must appear on any electrical and electronic equipment
placed on the EU market. This symbol indicates that this device should not be
disposed of as unsorted municipal waste at the end of its service life.
Owners of WEEE (Waste from Electrical and Electronic Equipment) shall dispose
of it separately from unsorted municipal waste. Spent batteries and
accumulators, which are not enclosed by the WEEE, as well as lamps that can be
removed from the WEEE in a non-destructive manner, must be removed by end
users from the WEEE in a non-destructive manner before it is handed over to a
collection point.
Distributors of electrical and electronic equipment are legally obliged to
provide free take-back of waste.
Conrad provides the following return options free of charge (more details on
our website):
- in our Conrad offices
- at the Conrad collection points
- at the collection points of public waste management authorities or the collection points set up by manufacturers or distributors within the meaning of the
ElektroG End users are responsible for deleting personal data from the WEEE to be disposed of.
It should be noted that different obligations about the return or recycling of WEEE may apply in countries outside of Germany.
Technical data
10.1 Product
Power input………………… MicroUSB 5 V/DC, 0.6 A
HDMI input……………….. HDMI eARC/ARC (Type A 19-pin female)
Audio output ……………………… 3.5 mm phone-jack / RCA
Audio format …………….. LPCM 2CH
Sample rates …………………… 44.1 kHz, 48 kHz, 96 kHz, 192 kHz
Output level ………………………. max. 2.1 Vpp
Output impedance ………………… 100 Ω
Operating conditions…………………………. 0 to +43 °C, 10 – 85 % RH (non-condensing)
Storage conditions……………………………. +20 to +60 °C, 10 – 85 % RH (non-condensing)
Dimensions (W x H x D) ……………………. 53 x 25 x 59 mm
Weight …………………… approx. 35 g
10.2 Power adapter
Input …………………………………. 100 – 240 V/AC, 50/60 Hz, 0.15 A
Output ……………………………………………. 5.0 V/DC, 0.6 A
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240
Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g.
photocopying, microfilming or the capture in electronic data processing
systems) requires prior written approval from the editor. Reprinting, also in
part, is prohibited. This publication reflects the technical status at the
time of printing.
Copyright by Conrad Electronic SE. *2523571_V2_0522_dh_mh_en
9007199780953867-2 I2/O2 en
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>