Sunnydaze DECOR IJF-532 LED Solar Pathway Light Instruction Manual
- June 12, 2024
- Sunnydaze DECOR
Table of Contents
Sunnydaze DECOR IJF-532 LED Solar Pathway Light
Product Information
The LED Solar Pathway Lights (model IJF-532) are designed to provide outdoor lighting using solar energy. The lights consist of a solar panel, rechargeable battery, and a light detecting sensor. During the day, the solar panel converts solar energy into electricity and stores it in the battery. At night, the lights automatically turn on using the built-in light detecting sensor. The duration of illumination depends on the location, weather conditions, and the amount of direct sunlight the solar panel receives. The lights have an ON/OFF switch for manual control.
Important Information
- Do NOT place the solar panel in shaded areas.
- Do NOT charge the solar panel behind glass.
- Clean the solar panel frequently.
- Ensure the power is switched to ‘ON’ while charging.
- The lights require at least 8 hours of full, direct sunlight for initial charging.
- The lights should be turned ‘ON’ during charging.
- The lights automatically illuminate when it gets dark if the battery has sufficient charge.
- The product uses a rechargeable battery that should be recycled according to local laws.
- Any modification or failure to follow recommended care will void the product warranty.
- Product Usage Instructions
Choosing the Right Location
Select a sunny location for optimal charging and lighting performance.
Assembly
- Step 1: Identify the different style stake pieces. Stake A has a short notch on the thicker end, while Stake B has a long notch in the tapered end. Push Stake A onto Stake B until the ends align with each other.
- Step 2: Insert the assembled stake onto the bottom of the disk light. Push the stake in until it is secure.
- Step 3: Press the button on the bottom of the disk to turn the light on. Place the light in a location that receives full, direct sunlight for at least 6-8 hours per day.
Operation
- Switch the power to the ‘ON’ position.
- Ensure the lights are placed in a sunny location.
- The lights will require at least 8 hours of full, direct sunlight for initial charging.
- Keep the lights turned ‘ON’ during charging.
- As long as the battery has sufficient charge, the lights will automatically illuminate when it gets dark.
- To conserve battery, turn the power ‘OFF’ at night.
Troubleshooting
- Turn the power ‘ON’ and place the lights in a location where the solar panel receives direct sunlight for at least 8 hours.
- Turn the power ‘OFF’ at night to conserve the battery.
- Repeat this process for 2-3 days if the lights are not functioning properly.
Purchase Date:
Order/Customer Reference Number
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell. Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email: customerservice@sunnydazedecor.com, or via our contact us page at https://tiny.cc/SunnydazeContact
LED SOLAR PATHWAY LIGHTS IJF-532
Read this manual carefully and follow the care instructions. Save this
document for future reference
PLEASE CHARGE FOR 8+ HOURS BEFORE FIRST USE
- Do NOT place the solar panel in shaded areas
- Do NOT charge the solar panel behind glass
- Clean the solar panel frequently
HOW SOLAR LIGHTS WORK
During the day, the solar panel converts solar energy into electricity and stores it in the rechargeable battery. At night, the light turns on automatically via a light detecting sensor built into the unit. How long the light illuminates will depend upon the location of the light, weather conditions, and how much direct sunlight the solar panel is exposed to. Ensure the power is switched to ‘ON’ while charging
CHOOSING THE RIGHT LOCATION
- Select an outdoor location where the solar panel will receive at least 6-8 hours of full, direct sunlight each day. Ensure the solar panel does not become shaded by trees, shrubs or buildings throughout the day as this will influence the charge of the battery and shorten the working time at night.
- Avoid locations with nighttime light sources nearby, such as street or porch lights. When the light detecting sensor receives too much ambient light, the lights will not illuminate.
OPERATION
- Switch the power to the ‘ON’ position and place the lights in a sunny location.
- First Time Use: The lights will require at least 8 hours of full, direct sunlight to fully charge the battery. Make sure the unit is turned ‘ON’ while charging.
- As long as the battery has a sufficient charge, the lights will automatically illuminate when it gets dark
ASSEMBLY
STEP 1
Identify the different style stake pieces.
- A has a short notch on the thicker end of the stake.
- B has a long notch in the tapered end the stake. Push stake A all the way onto stake B until the ends are aligned with each other.
STEP 2
Insert the assembled stake onto the bottom of the disk light. Push the
stake in until secure
STEP 3
Press the button on the bottom of the disk to turn the light on. Place in a
location that recieveds full, direct sunlight for at least 6-8 hours per day
USE & CARE
- For outdoor use only.
- Keep away from children ─ this is not a toy!
- Keep the solar panel clean by gently wiping it with a soft, damp cloth. Clean solar panels will absorb more sunlight.
- Never use chemicals or abrasive materials to clean the lights or solar panel.
- Store in a dry, warm, indoor location during inclement weather and freezing temperatures.
- Do not allow the unit to freeze. Freezing temperatures will damage the internal components.
- Turn the units off before storing.
- If installed in a grassy location, remove the disks and stakes from the ground before mowing or cutting the grass
TROUBLESHOOTING
- Ensure the power button is turned to the ‘ON’ position.
- This product is designed to only illuminate at night. Make sure the light sensor is not receiving too much ambient light.
- If the light only works for a short time, attempt a ‘Boost Charge’:
- Turn the power ‘ON’ and place in a location where the solar panel receives direct sunlight for at least 8 hours.
- Turn the power ‘OFF’ at night to conserve the battery.
- Repeat this process for 2-3 days
This product uses a rechargeable battery. When the battery can no longer be
used, it should be removed from the unit and recycled. The battery must not be
incinerated or composted. Recycle the battery in accordance with local laws
and regulations.
Any modification to the product or failure to follow recommended care will
void the product warranty.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>